TI SN74AUP2G04DSFR

SN74AUP2G04
www.ti.com
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
LOW-POWER DUAL INVERTER GATE
Check for Samples: SN74AUP2G04
FEATURES
1
•
•
•
•
•
•
•
Available in the Texas Instruments NanoStar™
Package
Low Static-Power Consumption:
ICC = 0.9 mA Max
Low Dynamic-Power Consumption:
Cpd = 4.3 pF Typ at 3.3 V
Low Input Capacitance: Ci = 1.5 pF Typ
Low Noise: Overshoot and Undershoot
<10% of VCC
Ioff Supports Partial-Power-Down Mode
Operation
Wide Operating VCC Range of 0.8 V to 3.6 V
DCK PACKAGE
(TOP VIEW)
6
1
1A
•
•
•
•
•
•
Optimized for 3.3-V Operation
3.6-V I/O Tolerant to Support Mixed-Mode
Signal Operation
tpd = 4.3 ns Max at 3.3 V
Suitable for Point-to-Point Applications
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
1Y
GND
2
5
VCC
2A
3
4
2Y
1A
1
6
YFP PACKAGE
(TOP VIEW)
DSF PACKAGE
(TOP VIEW)
DRY PACKAGE
(TOP VIEW)
1A
1Y
6
1
1Y
GND
2
5
VCC
GND
2
5
VCC
2A
3
4
2Y
2A
3
4
2Y
1A
GND
2A
A1
1
6 A2
B1
2
5 B2
C1
3
4 C2
1Y
VCC
2Y
N.C. – No internal connection
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
The AUP family is TI's premier solution to the industry's low-power needs in battery-powered portable
applications. This family ensures a very low static- and dynamic-power consumption across the entire VCC range
of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains excellent signal
integrity (see the very low undershoot and overshoot characteristics shown in Figure 2).
Static-Power Consumption
(µA)
100%
40%
60%
3.3-V
(A)
Logic
40%
Voltage (V)
80%
80%
60%
Switching Characteristics
at 25 MHz(A)
Dynamic-Power Consumption
(pF)
100%
3.3-V
(A)
Logic
20%
20%
AUP
AUP
0%
(A)
0%
AUP
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
−0.5
Input
0
5
Single, dual, and triple gates
(A)
Figure 1. AUP – The Lowest-Power Family
Output
10
15
20 25
Time (ns)
30
35
40
45
SN74AUP2Gxx data at CL = 15 pF.
Figure 2. Excellent Signal Integrity
The SN74AUP2G04 performs the Boolean function Y = A in positive logic.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated
SN74AUP2G04
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
www.ti.com
NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION (1)
–40°C to 85°C
(1)
(2)
(3)
ORDERABLE
PART NUMBER
PACKAGE (2)
TA
TOP-SIDE
MARKING (3)
NanoStar™ – WCSP (DSBGA)
0.23-mm Large Bump – YFP (Pb-free)
Reel of 3000
SN74AUP2G04YFPR
___HC_
QFN – DRY
Reel of 5000
SN74AUP2G04DRYR
H4
uQFN – DSF
Reel of 5000
SN74AUP2G04DSFR
H4
SOT (SC-70) – DCK
Reel of 3000
SN74AUP2G04DCKR
H4_
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site.
YFP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the wafer fab/assembly site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
FUNCTION TABLE
(Each Inverter)
INPUT
A
OUTPUT
Y
H
L
L
H
LOGIC DIAGRAM (POSITIVE LOGIC)
1A
2A
2
1
6
3
4
Submit Documentation Feedback
1Y
2Y
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
SN74AUP2G04
www.ti.com
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
ABSOLUTE MAXIMUM RATINGS (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
VCC
Supply voltage range
–0.5
4.6
V
VI
Input voltage range (2)
–0.5
4.6
V
VO
Voltage range applied to any output in the high-impedance or power-off state (2)
–0.5
4.6
V
–0.5
VCC + 0.5
(2)
UNIT
VO
Output voltage range in the high or low state
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±20
mA
Continuous current through VCC or GND
±50
mA
qJA
Package thermal impedance (3)
Tstg
Storage temperature range
DCK package
252
DRY package
234
DSF package
300
YFP package
(1)
(2)
(3)
V
°C/W
132
–65
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
3
SN74AUP2G04
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
www.ti.com
RECOMMENDED OPERATING CONDITIONS (1)
VCC
Supply voltage
VCC = 0.8 V
VIH
High-level input voltage
MIN
MAX
0.8
3.6
UNIT
V
VCC
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
0.65 × VCC
V
1.6
VCC = 3 V to 3.6 V
2
VCC = 0.8 V
0
VCC = 1.1 V to 1.95 V
0.35 × VCC
VIL
Low-level input voltage
VI
Input voltage
0
3.6
VO
Output voltage
0
VCC
V
VCC = 0.8 V
–20
mA
VCC = 1.1 V
–1.1
VCC = 1.4 V
–1.7
VCC = 1.65
–1.9
VCC = 2.3 V
–3.1
VCC = 2.3 V to 2.7 V
0.7
VCC = 3 V to 3.6 V
IOH
High-level output current
IOL
Low-level output current
0.9
VCC = 3 V
–4
VCC = 0.8 V
20
VCC = 1.1 V
1.1
VCC = 1.4 V
1.7
VCC = 1.65 V
1.9
VCC = 2.3 V
3.1
VCC = 3 V
Δt/Δv
Input transition rise or fall rate
TA
Operating free-air temperature
(1)
4
V
V
mA
mA
mA
4
VCC = 0.8 V to 3.6 V
–40
200
ns/V
85
°C
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow of Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
SN74AUP2G04
www.ti.com
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
VOH
TEST CONDITIONS
TYP
TA = –40°C to 85°C
MAX
MIN
0.8 V to 3.6 V
VCC – 0.1
VCC – 0.1
IOH = –1.1 mA
1.1 V
0.75 × VCC
0.7 × VCC
IOH = –1.7 mA
1.4 V
1.11
1.03
IOH = –1.9 mA
1.65 V
1.32
1.3
2.05
1.97
2.3 V
IOH = –3.1 mA
IOH = –2.7 mA
3V
IOH = –4 mA
1.9
1.85
2.72
2.67
2.6
2.55
V
0.8 V to 3.6 V
0.1
0.1
IOL = 1.1 mA
1.1 V
0.3 × VCC
0.3 × VCC
IOL = 1.7 mA
1.4 V
0.31
0.37
IOL = 1.9 mA
1.65 V
0.31
0.35
0.31
0.33
0.44
0.45
0.31
0.33
2.3 V
IOL = 3.1 mA
IOL = 2.7 mA
3V
IOL = 4 mA
0.44
0.45
0 V to 3.6 V
0.1
V
0.5
mA
Ioff
VI or VO = 0 V to 3.6 V
0V
0.2
0.6
mA
ΔIoff
VI or VO = 0 V to 3.6 V
0 V to 0.2 V
0.2
0.6
mA
ICC
VI = GND or (VCC to 3.6 V),
IO = 0
0.8 V to 3.6 V
0.5
0.9
mA
ΔICC
VI = VCC – 0.6 V (1), IO = 0
3.3 V
40
50
mA
Ci
VI = VCC or GND
Co
VO = GND
(1)
A or B input VI = GND to 3.6 V
UNIT
MAX
IOL = 20 mA
IOL = 2.3 mA
II
MIN
IOH = –20 mA
IOH = –2.3 mA
VOL
TA = 25°C
VCC
0V
1.5
3.6 V
1.5
0V
pF
3
pF
One input at VCC – 0.6 V, other input at VCC or GND.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
TA = 25°C
MIN
TYP
1.2 V ± 0.1 V
2.6
1.5 V ± 0.1 V
MIN
MAX
7.3
12.8
2.1
15.6
1.4
5.2
8.7
0.9
10.3
1.8 V ± 0.15 V
1
4.2
6.6
0.5
8.2
2.5 V ± 0.2 V
1
3
4.4
0.5
5.5
3.3 V ± 0.3 V
1
2.4
3.5
0.5
4.3
0.8 V
tpd
A or B
Y
TA = –40°C to 85°C
MAX
UNIT
18
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
ns
5
SN74AUP2G04
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
www.ti.com
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 10 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
VCC
MIN
TYP
1.2 V ± 0.1 V
1.5
8.5
0.8 V
tpd
A or B
Y
TA = –40°C to 85°C
MAX
MIN
MAX
14.7
1
17.2
UNIT
21
1.5 V ± 0.1 V
1
6.2
10
0.5
11.3
1.8 V ± 0.15 V
1
5
7.7
0.5
9
2.5 V ± 0.2 V
1
3.6
5.2
0.5
6.1
3.3 V ± 0.3 V
1
2.9
4.2
0.5
4.7
ns
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
VCC
MIN
TYP
0.8 V
tpd
A or B
Y
TA = –40°C to 85°C
MAX
MIN
MAX
UNIT
24
1.2 V ± 0.1 V
3.6
9.9
16.3
3.1
19.9
1.5 V ± 0.1 V
2.3
7.2
11.1
1.8
13.2
1.8 V ± 0.15 V
1.6
5.8
8.7
1.1
10.6
2.5 V ± 0.2 V
1
4.3
5.9
0.5
7.3
3.3 V ± 0.3 V
1
3.4
4.8
0.5
5.9
ns
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
TA = 25°C
MIN
0.8 V
tpd
A or B
Y
TYP
TA = –40°C to 85°C
MAX
MIN
MAX
UNIT
32.8
1.2 V ± 0.1 V
4.9
13.1
20.9
4.4
25.5
1.5 V ± 0.1 V
3.4
9.5
14.2
2.9
16.9
1.8 V ± 0.15 V
2.5
7.7
11
2
13.5
2.5 V ± 0.2 V
1.8
5.7
7.6
1.3
9.4
3.3 V ± 0.3 V
1.5
4.7
6.2
1
7.5
ns
OPERATING CHARACTERISTICS
TA = 25°C
PARAMETER
Cpd
6
Power dissipation capacitance
TEST CONDITIONS
f = 10 MHz
Submit Documentation Feedback
VCC
TYP
0.8 V
4
1.2 V ± 0.1 V
4
1.5 V ± 0.1 V
4
1.8 V ± 0.15 V
4
2.5 V ± 0.2 V
4.1
3.3 V ± 0.3 V
4.3
UNIT
pF
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
SN74AUP2G04
www.ti.com
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
PARAMETER MEASUREMENT INFORMATION
(Propagation Delays, Setup and Hold Times, and Pulse Width)
From Output
Under Test
CL
(see Note A)
1 MΩ
LOAD CIRCUIT
VCC = 0.8 V
CL
VM
VI
5, 10, 15, 30 pF
VCC/2
VCC
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
tw
VCC
Input
VCC/2
VCC/2
VI
VM
Input
0V
VM
VOLTAGE WAVEFORMS
PULSE DURATION
0V
tPHL
tPLH
VOH
VM
Output
VM
VOL
tPHL
VCC
Timing Input
0V
tPLH
tsu
VOH
Output
VCC/2
VM
th
VCC
VM
VOL
Data Input
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VCC/2
VCC/2
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
A.
CL includes probe and jig capacitance.
B.
Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output
control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the
output control.
C.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, for
propagation delays tr/tf = 3 ns, for setup and hold times and pulse width tr/tf = 1.2 ns.
D.
The outputs are measured one at a time, with one transition per measurement.
E.
tPLH and tPHL are the same as tpd.
F.
All parameters and waveforms are not applicable to all devices.
Figure 3. Load Circuit and Voltage Waveforms
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
7
SN74AUP2G04
SCES747B – SEPTEMBER 2009 – REVISED MARCH 2010
www.ti.com
PARAMETER MEASUREMENT INFORMATION
(Enable and Disable Times)
2 x VCC
S1
5 kΩ
From Output
Under Test
GND
CL
(see Note A)
5 kΩ
TEST
S1
tPLZ/tPZL
tPHZ/tPZH
2 x VCC
GND
LOAD CIRCUIT
VCC = 0.8 V
CL
VM
VI
V∆
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.3 V
VCC
Output
Control
VCC/2
0V
Output
Waveform 1
S1 at 2 x VCC
(see Note B)
tPZL
tPLZ
VCC
VCC/2
tPZH
Output
Waveform 2
S1 at GND
(see Note B)
VCC/2
VOL + V∆
VOL
tPHZ
VCC/2
VOH - V∆
VOH
≈0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
A.
CL includes probe and jig capacitance.
B.
Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output
control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the
output control.
C.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr/tf = 3 ns.
D.
The outputs are measured one at a time, with one transition per measurement.
E.
tPLZ and tPHZ are the same as tdis.
F.
tPLH and tPHL are the same as tpd.
G.
All parameters and waveforms are not applicable to all devices.
Figure 4. Load Circuit and Voltage Waveforms
8
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP2G04
PACKAGE OPTION ADDENDUM
www.ti.com
21-Oct-2011
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
Samples
(Requires Login)
SN74AUP2G04DCKR
ACTIVE
SC70
DCK
6
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
SN74AUP2G04DRYR
ACTIVE
SON
DRY
6
5000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
SN74AUP2G04DSFR
ACTIVE
SON
DSF
6
5000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
SN74AUP2G04YFPR
ACTIVE
DSBGA
YFP
6
3000
Green (RoHS
& no Sb/Br)
SNAGCU
(3)
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Jun-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
2.4
2.4
1.22
4.0
8.0
Q3
SN74AUP2G04DCKR
SC70
DCK
6
3000
178.0
9.2
SN74AUP2G04DCKR
SC70
DCK
6
3000
178.0
9.0
2.4
2.5
1.2
4.0
8.0
Q3
SN74AUP2G04DRYR
SON
DRY
6
5000
180.0
9.5
1.15
1.6
0.75
4.0
8.0
Q1
SN74AUP2G04DSFR
SON
DSF
6
5000
180.0
9.5
1.16
1.16
0.5
4.0
8.0
Q2
SN74AUP2G04YFPR
DSBGA
YFP
6
3000
178.0
9.2
0.89
1.29
0.62
4.0
8.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Jun-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74AUP2G04DCKR
SC70
DCK
6
3000
338.0
343.0
30.0
SN74AUP2G04DCKR
SC70
DCK
6
3000
180.0
180.0
18.0
SN74AUP2G04DRYR
SON
DRY
6
5000
180.0
180.0
30.0
SN74AUP2G04DSFR
SON
DSF
6
5000
180.0
180.0
30.0
SN74AUP2G04YFPR
DSBGA
YFP
6
3000
220.0
220.0
35.0
Pack Materials-Page 2
X: Max = 1.202 mm, Min =1.142 mm
Y: Max = 0.802 mm, Min =0.742 mm
X: Max = 1.202 mm, Min =1.142 mm
Y: Max = 0.802 mm, Min =0.742 mm
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated