TI SN74LS147N

 SDLS053B − OCTOBER 1976 − REVISED MAY 2004
D
D
’147, ’LS147
Encode 10-Line Decimal to 4-Line BCD
Applications Include:
− Keyboard Encoding
− Range Selection
D
D
SN54147, SN54LS147 . . . J OR W PACKAGE
SN74147, SN74LS147 . . . D OR N PACKAGE
(TOP VIEW)
4
5
6
7
8
C
B
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
’148, ’LS148
Encode 8 Data Lines to 3-Line Binary
(Octal)
Applications Include:
− n-Bit Encoding
− Code Converters and Generators
SN54148, SN54LS148 . . . J OR W PACKAGE
SN74148, SN74LS148 . . . D, N, OR NS PACKAGE
(TOP VIEW)
VCC
NC
D
3
2
1
9
A
4
5
6
7
EI
A2
A1
GND
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
E0
GS
3
2
1
0
A0
5
4
NC
VCC
E0
D
3
NC
2
1
6
7
NC
EI
A2
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
GS
3
NC
2
1
A1
GND
NC
A0
0
4
B
GND
NC
A
9
6
7
NC
8
C
16
2
SN54LS148 . . . FK PACKAGE
(TOP VIEW)
5
4
NC
VCC
NC
SN54LS147 . . . FK PACKAGE
(TOP VIEW)
1
NC − No internal connection
TYPE
TYPICAL
DATA
DELAY
TYPICAL
POWER
DISSIPATION
’147
10 ns
225 mW
’148
10 ns
190 mW
’LS147
15 ns
60 mW
’LS148
15 ns
60 mW
NOTE: The SN54147, SN54LS147, SN54148, SN74147, SN74LS147, and SN74148 are obsolete and are no longer supplied.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2004, Texas Instruments Incorporated
!"#$ % &'!!($ #% )'*+&#$ ,#$(!,'&$% &!" $ %)(&&#$% )(! $.( $(!"% (/#% %$!'"($%
%$#,#!, 0#!!#$1- !,'&$ )!&(%%2 ,(% $ (&(%%#!+1 &+',(
$(%$2 #++ )#!#"($(!%-
)!,'&$% &")+#$ $ 3 #++ )#!#"($(!% #!( $(%$(,
'+(%% $.(!0%( $(,- #++ $.(! )!,'&$% )!,'&$
)!&(%%2 ,(% $ (&(%%#!+1 &+',( $(%$2 #++ )#!#"($(!%-
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
description/ordering information
These TTL encoders feature priority decoding of the inputs to ensure that only the highest-order data line is
encoded. The ’147 and ’LS147 devices encode nine data lines to four-line (8-4-2-1) BCD. The implied decimal
zero condition requires no input condition, as zero is encoded when all nine data lines are at a high logic level.
The ’148 and ’LS148 devices encode eight data lines to three-line (4-2-1) binary (octal). Cascading circuitry
(enable input EI and enable output EO) has been provided to allow octal expansion without the need for external
circuitry. For all types, data inputs and outputs are active at the low logic level. All inputs are buffered to represent
one normalized Series 54/74 or 54/74LS load, respectively.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
PACKAGE†
TA
PDIP − N
0°C to 70°C
Tube
SN74LS148N
Tube
SN74LS148D
Tape and reel
SN74LS148DR
SOP − NS
Tape and reel
SN74LS148NSR
74LS148
CDIP − J
Tube
SNJ54LS148J
SNJ54LS148J
CFP − W
Tube
SNJ54LS148W
SNJ54LS148W
SOIC − D
−55°C
−55
C to 125
125°C
C
TOP-SIDE
MARKING
SN74LS148N
LS148
LCCC − FK
Tube
SNJ54LS148FK
SNJ54LS148FK
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
FUNCTION TABLE − ’147, ’LS147
INPUTS
OUTPUTS
1
2
3
4
5
6
7
8
9
D
C
B
A
H
H
H
H
H
H
H
H
H
H
H
H
H
X
X
X
X
X
X
X
X
L
L
H
H
L
X
X
X
X
X
X
X
L
H
L
H
H
H
X
X
X
X
X
X
L
H
H
H
L
L
L
X
X
X
X
X
L
H
H
H
H
L
L
H
X
X
X
X
L
H
H
H
H
H
L
H
L
X
X
X
L
H
H
H
H
H
H
L
H
H
X
X
L
H
H
H
H
H
H
H
H
L
L
X
L
H
H
H
H
H
H
H
H
H
L
H
L
H
H
H
H
H
H
H
H
H
H
H
L
H = high logic level, L = low logic level, X = irrelevant
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
FUNCTION TABLE − ’148, ’LS148
OUTPUTS
INPUTS
EI
0
1
2
3
4
5
6
7
A2
A1
A0
GS
EO
H
X
X
X
X
X
X
X
X
H
H
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
H
L
L
X
X
X
X
X
X
X
L
L
L
L
L
H
L
X
X
X
X
X
X
L
H
L
L
H
L
H
L
X
X
X
X
X
L
H
H
L
H
L
L
H
L
X
X
X
X
L
H
H
H
L
H
H
L
H
L
X
X
X
L
H
H
H
H
H
L
L
L
H
L
X
X
L
H
H
H
H
H
H
L
H
L
H
L
X
L
H
H
H
H
H
H
H
H
L
L
H
L
L
H
H
H
H
H
H
H
H
H
H
L
H
H = high logic level, L = low logic level, X = irrelevant
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
’147, ’LS147 logic diagram (positive logic)
(11)
1
2
3
4
(12)
(9)
(13)
(1)
(7)
5
6
7
8
9
B
(2)
(3)
(4)
(6)
C
(5)
(14)
(10)
Pin numbers shown are for D, J, N, and W packages.
4
A
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
D
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
’148, ’LS148 logic diagram (positive logic)
0
(10)
(15)
1
2
(14)
(11)
4
6
7
EI
A0
(13)
(1)
(7)
5
G5
(12)
(9)
3
EO
A1
(2)
(3)
(4)
(6)
A2
(5)
Pin numbers shown are for D, J, N, NS, and W packages.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
schematics of inputs and outputs
’147, ’148
EQUIVALENT OF EACH INPUT
TYPICAL OF ALL OUTPUTS
VCC
VCC
Ω NOM
Req
Input
Output
0 input (’148): Req = 2 kΩ NOM
All other inputs: Req = 4 kΩ NOM
’LS147, ’LS148
EQUIVALENT OF ALL INPUTS
TYPICAL OF ALL OUTPUTS
VCC
VCC
120 Ω NOM
Req
Input
Output
’LS148 inputs 1–7: Req = 9 kΩ NOM
All other inputs: Req = 18 kΩ NOM
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI: ’147, ’148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
’LS147, ’LS148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Inter-emitter voltage: ’148 only (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Package thermal impedance θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values, except inter-emitter voltage, are with respect to the network ground terminal.
2. This is the voltage between two emitters of a multiple-emitter transistor. For ’148 circuits, this rating applies between any two of the
eight data lines, 0 through 7.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 4)
SN54’
VCC
IOH
Supply voltage
IOL
TA
Low-level output current
MIN
NOM
4.5
5
High-level output current
Operating free-air temperature
SN74’
MAX
MIN
NOM
5.5
4.75
5
−800
125
MAX
MIN
NOM
5.25
4.5
5
−800
16
−55
SN54LS’
70
MAX
MIN
NOM
5.5
4.75
5
−400
16
0
SN74LS’
4
−55
125
0
MAX
UNIT
5.25
V
−400
µA
8
mA
70
°C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
TEST CONDITIONS†
PARAMETER
VIH
VIL
High-level input voltage
VIK
Input clamp voltage
VOH
High-level output voltage
VOL
’147
MIN TYP‡
MAX
’148
MIN TYP‡
2
2
Low-level input voltage
V
0.8
V
−1.5
−1.5
V
II = −12 mA
VIH = 2 V,
IOH = −800 µA
Low-level output voltage
VCC = MIN,
VIL = 0.8 V,
VIH = 2 V,
IOL = 16 mA
II
Input current at maximum input
voltage
VCC = MIN,
VI = 5.5 V
1
High-level input
current
0 input
IIH
VCC = MAX,
VI = 2.4 V
40
Low-level input
current
0 input
IIL
VCC = MAX,
VI = 0.4 V
−1.6
3.3
2.4
0.2
3.3
0.4
0.2
V
0.4
1
40
Any input except 0
UNIT
0.8
VCC = MIN,
VCC = MIN,
VIL = 0.8 V,
2.4
MAX
80
V
mA
µA
A
−1.6
IOS
Any input except 0
Short-circuit output current§
ICC
Supply current
VCC = MAX
−35
VCC = MAX
(See Note 5)
−85
−3.2
−35
−85
Condition 1
50
70
40
60
Condition 2
42
62
35
55
mA
mA
mA
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C.
§ Not more than one output should be shorted at a time.
NOTE 5: For ’147, ICC (Condition 1) is measured with input 7 grounded, other inputs and outputs open; ICC (Condition 2) is measured with all
inputs and outputs open. For ’148, ICC (Condition 1) is measured with inputs 7 and EI grounded, other inputs and outputs open; ICC
(Condition 2) is measured with all inputs and outputs open.
SN54147, SN74147 switching characteristics, VCC = 5 V, TA = 255C (see Figure 1)
8
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
Any
Any
tPLH
tPHL
Any
Any
WAVEFORM
TEST
CONDITIONS
In-phase output
Out-of-phase output
POST OFFICE BOX 655303
CL = 15 pF,
RL = 400 Ω
• DALLAS, TEXAS 75265
MIN
TYP
MAX
9
14
7
11
13
19
12
19
UNIT
ns
ns
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
SN54148, SN74148 switching characteristics, VCC = 5 V, TA = 255C (see Figure 1)
PARAMETER†
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
1–7
A0, A1, or A2
In-phase output
tPLH
tPHL
1–7
A0, A1, or A2
Out-of-phase output
tPLH
tPHL
0–7
EO
Out-of-phase output
tPLH
tPHL
0–7
GS
In-phase output
tPLH
tPHL
EI
A0, A1, or A2
In-phase output
tPLH
tPHL
EI
GS
In-phase output
tPLH
tPHL
EI
EO
In-phase output
WAVEFORM
TEST
CONDITIONS
MIN
CL = 15 pF,
RL = 400 Ω
TYP
MAX
10
15
9
14
13
19
12
19
6
10
14
25
18
30
14
25
10
15
10
15
8
12
10
15
10
15
17
30
UNIT
ns
ns
ns
ns
ns
ns
ns
† tPLH = propagation delay time, low-to-high-level output.
tPHL = propagation delay time, high-to-low-level output.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VIH
VIL
High-level input voltage
VIK
Input clamp voltage
VOH
High-level output voltage
VOL
Low-level output voltage
Input current at
maximum input
voltage
’LS148 inputs 1–7
II
High-level input
current
’LS148 inputs 1–7
IIH
Low-level input
current
’LS148 inputs 1–7
IIL
TEST CONDITIONS†
SN54LS’
MIN TYP‡ MAX
2
2
Low-level input voltage
All other inputs
All other inputs
IOS
All other inputs
Short-circuit output current§
ICC
Supply current
VCC = MIN,
VCC = MIN,
VIL = 0.8 V,
II = −18 mA
VIH = 2 V,
IOH = −400 µA
VCC = MIN,
VIH = 2 V,
VIL = VIL MAX
IOL = 4 mA
VCC = MAX,
VI = 7 V
VCC = MAX,
VI = 2.7 V
VCC = MAX,
VI = 0.4 V
V
0.7
0.8
V
−1.5
V
3.4
0.25
UNIT
−1.5
2.7
0.4
3.4
V
0.25
0.4
0.35
0.5
V
IOL = 8 mA
VCC = MAX
VCC = MAX
(See Note 6)
2.5
SN74LS’
MIN TYP‡ MAX
0.2
0.2
0.1
0.1
40
40
20
20
−0.8
−0.8
−0.4
−0.4
mA
−20
−100
−20
−100
Condition 1
12
20
12
20
Condition 2
10
17
10
17
µA
A
mA
mA
mA
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C.
§ Not more than one output should be shorted at a time.
NOTE 6: For ’LS147, ICC (Condition 1) is measured with input 7 grounded, other inputs and outputs open; ICC (Condition 2) is measured with
all inputs and outputs open. For ’LS148, ICC (Condition 1) is measured with inputs 7 and EI grounded, other inputs and outputs open;
ICC (Condition 2) is measured with all inputs and outputs open.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
SN54LS147, SN74LS147 switching characteristics, VCC = 5 V, TA = 255C (see Figure 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
Any
Any
tPLH
tPHL
Any
Any
WAVEFORM
TEST
CONDITIONS
MIN
In-phase output
Out-of-phase output
CL = 15 pF,
RL = 2 kkΩ
TYP
MAX
12
18
12
18
21
33
15
23
UNIT
ns
ns
SN54LS148, SN74LS148 switching characteristics, VCC = 5 V, TA = 255C (see Figure 2)
PARAMETER†
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
1–7
A0, A1, or A2
In-phase output
tPLH
tPHL
1–7
A0, A1, or A2
Out-of-phase output
tPLH
tPHL
0–7
EO
Out-of-phase output
tPLH
tPHL
0–7
GS
In-phase output
tPLH
tPHL
EI
A0, A1, or A2
In-phase output
tPLH
tPHL
EI
GS
In-phase output
tPLH
tPHL
EI
EO
In-phase output
WAVEFORM
TEST
CONDITIONS
CL = 15 pF,
RL = 2 kΩ
k
† tPLH = propagation delay time, low-to-high-level output
tPHL = propagation delay time, high-to-low-level output
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MIN
TYP
MAX
14
18
15
25
20
36
16
29
7
18
25
40
35
55
9
21
16
25
12
25
12
17
14
36
12
21
23
35
UNIT
ns
ns
ns
ns
ns
ns
ns
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
PARAMETER MEASUREMENT INFORMATION
SERIES 54/74 DEVICES
VCC
Test
Point
VCC
RL
(see Note B)
From Output
Under Test
CL
(see Note A)
High-Level
Pulse
1.5 V
S2
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3V
Timing
Input
1.5 V
1 kΩ
Test
Point
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
S1
(see Note B)
CL
(see Note A)
RL
CL
(see Note A)
RL
From Output
Under Test
VCC
From Output
Under Test
Test
Point
1.5 V
0V
tw
Low-Level
Pulse
1.5 V
tsu
0V
In-Phase
Output
(see Note D)
tPHL
VOH
1.5 V
Out-of-Phase
Output
(see Note D)
1.5 V
3V
1.5 V
Waveform 1
(see Notes C
and D)
tPLZ
VOH
1.5 V
1.5 V
VOL
VOL
Waveform 2
(see Notes C
and D)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
≈1.5 V
1.5 V
tPZH
tPLH
1.5 V
0V
tPZL
VOL
tPHL
1.5 V
0V
Output
Control
(low-level
enabling)
1.5 V
tPLH
1.5 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3V
1.5 V
3V
Data
Input
1.5 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
Input
th
VOL + 0.5 V
tPHZ
VOH
1.5 V
VOH − 0.5 V
≈1.5 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A. CL includes probe and jig capacitance.
B. All diodes are 1N3064 or equivalent.
C. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open, and S2 is closed for tPZH; S1 is closed, and S2 is open for tPZL.
E. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω; tr and tf ≤ 7 ns for Series
54/74 devices and tr and tf ≤ 2.5 ns for Series 54S/74S devices.
F. The outputs are measured one at a time, with one input transition per measurement.
Figure 1. Load Circuits and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
PARAMETER MEASUREMENT INFORMATION
SERIES 54LS/74LS DEVICES
VCC
Test
Point
VCC
RL
(see Note B)
From Output
Under Test
CL
(see Note A)
High-Level
Pulse
1.3 V
S2
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3V
Timing
Input
1.3 V
5 kΩ
Test
Point
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
S1
(see Note B)
CL
(see Note A)
RL
CL
(see Note A)
RL
From Output
Under Test
VCC
From Output
Under Test
Test
Point
1.3 V
0V
tw
Low-Level
Pulse
1.3 V
tsu
Data
Input
1.3 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
1.3 V
1.3 V
Output
Control
(low-level
enabling)
0V
tPLH
In-Phase
Output
(see Note D)
1.3 V
0V
3V
1.3 V
1.3 V
0V
tPZL
tPLZ
tPHL
VOH
1.3 V
1.3 V
Waveform 1
(see Notes C
and D)
VOL
tPZH
tPLH
VOH
1.3 V
1.3 V
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
≈1.5 V
1.3 V
VOL
tPHL
Out-of-Phase
Output
(see Note D)
3V
1.3 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3V
Input
th
Waveform 2
(see Notes C
and D)
VOL + 0.5 V
tPHZ
VOH
1.3 V
VOH − 0.5 V
≈1.5 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A. CL includes probe and jig capacitance.
B. All diodes are 1N3064 or equivalent.
C. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open, and S2 is closed for tPZH; S1 is closed, and S2 is open for tPZL.
E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples.
F. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω, tr ≤ 1.5 ns, tf ≤ 2.6 ns.
G. The outputs are measured one at a time, with one input transition per measurement.
Figure 2. Load Circuits and Voltage Waveforms
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SDLS053B − OCTOBER 1976 − REVISED MAY 2004
APPLICATION INFORMATION
16-Line Data (active low)
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
0 1 2 3 4 5 6 7 EI
0 1 2 3 4 5 6 7 EI
’148/’LS148
’148/LS148
EO
A0
A1
A2 GS
EO
A0
A1
A2
Enable
(active low)
GS
’08/’LS08
0
1
2
Priority Flag
(active low)
3
Encoded Data (active low)
16-Line Data (active low)
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
0 1 2 3 4 5 6 7 EI
0 1 2 3 4 5 6 7 EI
’148/’LS148
’148/’LS148
EO A0
A1
A2 GS
EO
A0
A1
A2
Enable
(active low)
GS
’HC00
0
1
2
Priority Flag
(active high)
3
Encoded Data (active high)
Figure 3. Priority Encoder for 16 Bits
Because the ’147/’LS147 and ’148/’LS148 devices are combinational logic circuits, wrong addresses can appear
during input transients. Moreover, for the ’148/’LS148 devices, a change from high to low at EI can cause a transient
low on GS when all inputs are high. This must be considered when strobing the outputs.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
78027012A
ACTIVE
LCCC
FK
20
1
TBD
7802701EA
ACTIVE
CDIP
J
16
1
TBD
7802701FA
ACTIVE
CFP
W
16
1
TBD
JM38510/36001B2A
ACTIVE
LCCC
FK
20
1
TBD
JM38510/36001BEA
ACTIVE
CDIP
J
16
1
TBD
1
Lead/Ball Finish
MSL Peak Temp (3)
POST-PLATE N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
A42
N / A for Pkg Type
POST-PLATE N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
TBD
A42
N / A for Pkg Type
TBD
Call TI
TBD
A42 SNPB
JM38510/36001BFA
ACTIVE
CFP
W
16
SN54148J
OBSOLETE
CDIP
J
16
SN54LS148J
ACTIVE
CDIP
J
16
SN74147N
OBSOLETE
PDIP
N
16
TBD
Call TI
Call TI
SN74148J
OBSOLETE
CDIP
J
16
TBD
Call TI
Call TI
SN74148N
OBSOLETE
PDIP
N
16
TBD
Call TI
Call TI
1
Call TI
N / A for Pkg Type
SN74148N3
OBSOLETE
PDIP
N
16
TBD
Call TI
Call TI
SN74LS147DR
OBSOLETE
SOIC
D
16
TBD
Call TI
Call TI
SN74LS147N
OBSOLETE
PDIP
N
16
TBD
Call TI
Call TI
SN74LS148D
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148DE4
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148DG4
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148DR
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148DRE4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148DRG4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148J
OBSOLETE
CDIP
J
16
SN74LS148N
ACTIVE
PDIP
N
16
TBD
Call TI
25
Pb-Free
(RoHS)
CU NIPDAU
Call TI
TBD
Call TI
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
N / A for Pkg Type
SN74LS148N3
OBSOLETE
PDIP
N
16
SN74LS148NE4
ACTIVE
PDIP
N
16
SN74LS148NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148NSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74LS148NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SNJ54148J
OBSOLETE
CDIP
J
16
TBD
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
SNJ54148W
OBSOLETE
CFP
W
16
SNJ54LS148FK
ACTIVE
LCCC
FK
20
1
TBD
SNJ54LS148J
ACTIVE
CDIP
J
16
1
TBD
A42 SNPB
N / A for Pkg Type
SNJ54LS148W
ACTIVE
CFP
W
16
1
TBD
A42
N / A for Pkg Type
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
Addendum-Page 1
POST-PLATE N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
9-Jun-2007
TAPE AND REEL INFORMATION
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
Device
9-Jun-2007
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN74LS148DR
D
16
FMX
330
16
6.5
10.3
2.1
8
16
Q1
SN74LS148NSR
NS
16
MLA
330
16
8.2
10.5
2.5
12
16
Q1
TAPE AND REEL BOX INFORMATION
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
SN74LS148DR
D
16
FMX
342.9
336.6
28.58
SN74LS148NSR
NS
16
MLA
342.9
336.6
28.58
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated