AS-Interface master Dimensions 114 60 93 Model number 107 Electrical connection VAM-CTR-KF-R2 AS-Interface master RS 232 cabinet module AS-i AS-i + 4 5 AS-i AS-i + 24 23 AS-i AS-i + 33 32 Power Rail 5 4 Features • Stand-alone master with PLC functionality • Two-digit LC display • Voltage supply from AS-Interface • Automatic baud rate detection • Programmable slave addresses • Display of detected slaves • Fault diagnosis • Parameterisation and monitor software • Power Rail connection • RS 232 interface RS 232 3 2 5 Sub-D socket RxD TxD GND 25 26 27 35 36 RxD TxD GND Screen Indication/operating means 1 10 2 11 3 12 4 13 5 14 6 15 7 16 8 17 9 18 POWER SER ACTIVE CONFIG ERR U ASI MODE ASI ACTIVE PRG ENABLE PRJ MODE SET VAM-CTR-KF-R2 19 28 20 29 21 30 22 31 23 32 24 33 25 34 26 35 27 36 21.01.2002 RS 232 Date of Issue Masters and Gateways Terminal for wall mounting Subject to reasonable modifications due to technical advances. 15 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com Technical data Indicators/operating means LC display, two-digit LED AS-i ACTIVE LED CONFIG ERR LED PRG ENABLE LED ENERGY LED PRJ MODE LED SER ACTIVE LED U AS-i Switch SET Button MODE Electrical specifications Insulation voltage Ui Rated operational voltage Ue Rated operational current Ie Connection type AS-Interface Ambient conditions Ambient temperature Storage temperature Mechanical specifications Protection degree Mass Documentation V2.0 RS 232 1200 , 2400 , 4800 , 9600 , 19200 , 38400 or 57600 Bit/s , Automatic baud rate detection address display, error message AS-i operation normal; LED green configuration error; LED red autom. programming; LED green voltage ON; LED green projecting mode active; LED yellow interface in operation; LED green AS-i voltage; LED green selection and setting of a slave address mode selection/saving the configuration Š 500 V from AS-Interface £ 150 mA The documentation includes manuals in German and English. It is available on the Internet and in printed form as a CD-ROM on request. Software The AS-i Control Tools software is supplied as restricted version together with the documentation. The software performs addressing, programming and monitoring of the AS-Interface network. In addition, it contains an editor that creates programs for the integrated PLC functionality. The full version of the AS-i Control Tool is available as an accessory and features an expanded diagnostics monitor as well as a larger program memory for AS-i Control which makes it possible to detect faulty telegrams of slaves. removable coded terminals, Power Rail 0 ... 55 °C (273 ... 328 K) -25 ... 70 °C (248 ... 343 K) IP20 in accordance with EN 60529 420 g Function The VAM-CTR-KF-R* is a stand-alone master with integrated PLC functionality. The design of this master is ideal for use in a cabinet. Its housing, only 60 mm wide, occupies little space in a cabinet installation. The VAM-CTR-KF-R* is installed by snapping it onto the 35 mm DIN Rail per EN 50022, with the integrated Power Rail. The AS-Interface signal is transmitted through conductors, which are integrated into the Power Rail. Thus all cabinet modules in KF housing can be connected to the AS-Interface cable by simply snapping them onto the DIN Rail. Removable terminals for leading the AS-i cable through the cabinet are available. These terminals are coded and allow "online" maintenance, i.e. while the system is under power. The connection to the AS-Interface power supply is established through these terminals which can also be used for the serial interface. A 9-pin Sub-D connector is also available. Power to the master is supplied by the AS-i cable. Two push buttons are used for address assignment of the AS-Interface slaves and acceptance of the desired configuration. In configuration mode, all detected AS-Interface slaves are displayed on the 2-digit LCD. In normal operation, the LCD is blank unless the master detects a faulty AS-Interface slave. There are 7 LEDs on the front panel, showing the current status of the AS-i line. Accessories VAZ-SW-ACT32 Full version of the AS-i control tools UPR-05 Universal Power Rail including aluminium top hat section rail and cover, 2 m long UPR-E End cap for UPR-05 PR-05 Power Rail with grid, 0.5 m long Date of Issue 21.01.2002 PLC Functionality The VAM-CTR-KF-R* provides 16 kBytes of program memory, 8 kBytes of main memory, 1024 counters and 1024 timers for PLC functionality. These capacities suffice to process data on the AS-Interface. Thus the master can also be operated in "stand-alone“ mode. The program processing time is approximately 1000 word commands every 2 ms. The programming language is based upon the STEP5programming language. Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 16 Masters and Gateways General specifications AS-i specification Interface Interface type Transfer rate VAM-CTR-KF-R2