Optoway SPS-2140WG 1 *********************************************************************************************************************************************************************** SPS-2140WG / SPS-2140BWG / SPS-2140AWG (RoHS Compliant) 10.3 Gb/s / 40 km / 1310 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l The SPS-2140WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. Up to 10.5 Gb/s Bi-directional Data Links Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-LR Compliant to IEEE 802.3ae 10GBASE-LW SFF-8472 Digital Diagnostic Function 1310 nm DFB LD Transmitter AC/AC Coupling according to MSA Distance up to 40 km at SM Fiber Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating: SPS-2140WG -10 to 85oC Operating: SPS-2140BWG -40 to 85oC Operating: SPS-2140AWG Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l High-speed Storage Area Networks l Computer Cluster Cross-connect l Custom High-speed Data Pipes ORDER INFORMATION P/No. SPS-2140WG SPS-2140BWG SPS-2140AWG Bit Rate (Gb/s) 10GBASE Distance (km) Wavelength (nm) Package 10.3 LR / LW 40 1310 DFB 10.3 10.3 LR / LW 40 40 1310 DFB 1310 DFB LR / LW Temp. (oC) RoHS Compliant SFP+ with DMI 0 to 70 Yes SFP+ with DMI SFP+ with DMI -10 to 85 -40 to 85 Yes Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -10 -40 -0.5 Max 85 70 85 85 3.6 Units o C o C Notes SPS-2140WG SPS-2140BWG SPS-2140AWG V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr ICC (TX+RX) Min 3.13 0 -10 -40 Typ 3.3 280 10.3125 Max 3.47 70 85 85 350 10.5 Units / Notes V o C / SPS-2140WG o C / SPS-2140BWG o C / SPS-2140AWG mA Gb/s *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2140WG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA λc σλ SMSR ER RIN Min 1.5 1 1290 Typ Max 5 1310 1330 1 30 3.5 -128 -30 Units dBm dBm nm nm dB Notes 1 -20 dB width dB/Hz dBm 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity in OMA Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen P MAX LOSD LOSA λc Min Typ 1 ---30 1260 ------- Max -15 -18 --1565 Units dBm dBm dBm dBm nm Max Units Notes 2 Transition: low to high Transition: high to low 2. Measured with worst ER; BER < 10-12 and PRBS 2 31-1 at 10.3125 Gb/s.. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate TX Clock Tolerance Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate RX Clock Tolerance Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 10.3125 700 Gb/s ppm Ω mVpp Gb/s ppm Ω mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V ±100 100 150 1200 10.3125 ±100 350 2.0 GND 2.4 GND 100 600 Notes 3 Internally AC coupled 3 Internally AC coupled 3. Clock tolerance for 9.95Gb/s, 10.3125Gb/s and 10.5187 Gb/s. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2140WG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground Module Definition Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2140WG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30K Ω 8 RS1 9 RS0 7 30K Ω MOD_ABS EEPROM SCL SDA LOSS OF SINGAL ( 10,11,14) TX Rate Select RX Rate Select 6 MODU LE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2140WG 5 *********************************************************************************************************************************************************************** Revision History Version 1.0 2.0 Subject Initial datasheet Add SPS-2140AWG for -40 to 85oC Release Date 2007/10/1 2007/12/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2007/12/1 V2.0