Subminiature Basic Switch
SSG
Global Subminiature Basic Switch
Conforming to EN, UL, and CSA Standards
• A wide operating temperature range of -25°C to 125°C is
available for at high-temperature use.
• PCB terminal models are resistant to flux.
• Even-pitched PCB terminals.
• RoHS Compliant.
Ordering Information
Actuator
Pin plunger
Rating
OF max.
5A
153 gf
51 gf
153 gf
51 gf
61 gf
20 gf
61 gf
20 gf
61 gf
20 gf
61 gf
20 gf
61 gf
20 gf
61 gf
20 gf
0.1 A
Hinge lever
5A
0.1 A
Simulated roller lever
5A
0.1 A
Hinge roller lever
5A
0.1 A
Solder
Quick-connect
terminal (#110)
SSG-5T
SSG-5T-5
SSG-01T
SSG-01T-5
SSG-5L1T
SSG-5L1T-5
SSG-01L1T
SSG-01L1T-5
SSG-5L3T
SSG-5L3T-5
SSG-01L3T
SSG-01L3T-5
SSG-5L2T
SSG-5L2T-5
SSG-01L2T
SSG-01L2T-5
SSG-5H
SSG-5H-5
SSG-01H
SSG-01H-5
SSG-5L1H
SSG-5L1H-5
SSG-01L1H
SSG-01L1H-5
SSG-5L3H
SSG-5L3H-5
SSG-01L3H
SSG-01L3H-5
SSG-5L2H
SSG-5L2H-5
SSG-01L2H
SSG-01L2H-5
PCB
SSG-5P
SSG-5P-5
SSG-01P
SSG-01P-5
SSG-5L1P
SSG-5L1P-5
SSG-01L1P
SSG-01L1P-5
SSG-5L3P
SSG-5L3P-5
SSG-01L3P
SSG-01L3P-5
SSG-5L2P
SSG-5L2P-5
SSG-01L2P
SSG-01L2P-5
Note: SPST models are also available, but not listed in the above table.
Model Number Legend
SSG1 2 3 4 5
1.
2.
Ratings
5:
5 A at 125 VAC
01:
0.1 A at 125 VAC
Actuator
None: Pin plunger
L1:
Hinge lever
L3:
Simulated roller lever
L2:
Hinge roller lever
3.
4.
Contact Form
None: SPDT
-2:
SPST-NC
-3:
SPST-NO
5.
Maximum Operating Force (see note)
None: 153 gf
-5:
51 gf
Note: These OF values are for the pin plunger models.
Terminals
H:
Solder terminals
T:
Quick-connect terminals (#110)
P:
PCB terminals
Consult Omron regarding the following:
- SPST-NC and SPST-NO versions
(Solder and QC terminals, only)
Subminiature Basic Switch
SSG
109
Specifications
■ Characteristics
Operating speed
0.1 mm to 1 m/second (pin plunger models)
Operating frequency
Mechanical: 400 operations per minute max.
Electrical: 30 operations per minute max.
Insulation resistance
100 MΩ
Contact resistance
153 gf:
SSG-5 models
:
SSG-01 models:
51 gf:
30 mΩ max.
50 mΩ max.
SSG-5 models:
50 mΩ max.
SSG-01 models
100 mΩ max.
Dielectric strength (See note 2)
1,000 VAC (600 VAC for SSG-01H and SSG-01T), 50/60 Hz for 1 minute between contacts of same polarity
1,500 VAC, 50/60 Hz for 1 minute between each terminal and ground and between each terminal and
non-current-carrying metal parts
Vibration resistance (see note 3)
Malfunction: 10 to 2,000 Hz, 196 m/s2 (Approx. 20G)
Shock resistance (see note 3)
Malfunction: 490 m/s2 (approx. 50G) max.
Degree of protection
IEC IP40
Degree of protection against
electric shock
Class I
Proof tracking index (PTI)
175
Ambient operating temperature
-25° to 125°C (at 60% RH max.) with no icing
Ambient operating humidity
85% max. (for 5°C to 35°C)
Service life
Mechanical: 10 million operations min. at 60 operations per minute
Electrical: 200,000 operations min. at 30 operations per minute
Weight
Approx. 1.6 g pin plunger type
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate.
3. For pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, the values apply
at the total travel position with contact separation = 10μs max.
■ Ratings
General Ratings
Resistive load
Rated
voltage
NC
NO
Lamp load
NC
Inductive load
NO
NC
NO
Motor load
NC
NO
125 VAC
5 A (0.1 A)
1.5 A
0.7 A
3A
2.5 A
1.3 A
250 VAC
3A
1A
0.5 A
2A
1.5 A
0.8 A
8 VDC
5A
2A
5A
3A
14 VDC
5A
2A
4A
3A
30 VDC
4 A(0.1 A)
2A
3A
3A
125 VDC
0.4 A
0.05 A
0.4 A
0.05 A
250 VDC
0.2 A
0.03 A
0.2 A
0.05 A
Note: 1.
2.
3.
4.
5.
6.
7.
110
The values in the parentheses are for the SSG-01.
The above current ratings are the values of the steady-state current.
Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC).
Lamp load has an inrush current of 10 times the steady-state current.
Motor load has an inrush current of 6 times the steady-state current.
If the Switch is used in a DC circuit and is subjected to a surge current, connect a surge suppressor across the switch.
The electrical rating applies under the following test conditions:
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute
Subminiature Basic Switch
SSG
■ Approved Standards
■ Contact Specifications
UL Recognized (File No. E41515)
CSA Certified (File No. LR21642)
Rated Voltage
SSG-5
SSG-01
125 VAC
5A
0.1 A
250 VAC
3A
---
30 VDC
---
0.1 A
EN61058-1 - - TÜV Rheinland approval
(File No. T9451449)
Rated Voltage
SSG-5
SSG-01
250 VAC
5A
---
30 VDC
---
0.1 A
Testing conditions: 5E4 (50,000 operations), T125 (0°C to 125°C)
Item
SSG-5
SSG-01H(T)
SSG-01P
Specification
Rivet
Crossbar
Material
Silver
Gold alloy
Gold alloy
Gap (standard value)
0.5 mm
0.25 mm
0.5 mm
Inrush current
NC: 20A max.
1A max.
1A max.
NO: 10A max.
Minimum applicable
160 mA at 5
1 mA at 5 VDC
load (see note)
VDC
Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60%
(λ60) reliability level (JIS C5003).
The equation λ60=0.5 x 10-6 / operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
Note: The rated values approved by each of the safety standards
(e.g. UL, CSA) may be different from the performance characteristics individually defined in this catalog.
Engineering Data
■ Mechanical Service Life
■ Electrical Service Life
SSG-5 Models
SSG-5 Models
40,000
Number of operations (x10 3)
Number of operations (x10 3)
5,000
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Without load
Operating frequency: 60 operations/min
30,000
20,000
10,000
5,000
3,000
1,000
0.2
0.3
0.4
0.5
0.6
0.7
Overtravel (mm)
125 VAC
500
300
250 VAC
100
50
30
10
0.1
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 30 operations/min
cosφ = 1
0
1
2
3
4
5
6
7
Switching current (A)
■ Contact Form
■ Mounting
SPST-NC
SPDT
Panel Mounting
SPST-NO
All switches may be panel mounted using M2.2 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.20 to 0.24 N·m.
Two, 2.2-dia. mounting holes or
M2.2 screw holes
COM
NO NC
COM
NC
COM
NO
* Consult Omron for SPST-NC and SPST-NO contact form types
ordering information.
9.5 ± 0.1
PCB Layout
Three, 1.35 dia. to 1.5 dia.
2.78±0.1
9.5±0.1
7.62±0.1
15.24±0.1
Subminiature Basic Switch
SSG
111
Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
Solder Terminals
Quick-connect Terminals (#110)
7.5±0.3
7.5±0.3
PT
3.5
1.8
2.2
+0.1
0
+0.1
C
NO
2.2 0
7.7 OP
6.9
2.2
6.1
PT
3.5
1.8
6.9 7.7
OP
2.2
C
NC
NO
NC
10.6
7.1
2.5 dia.
5.1
2.2 +0.1
0 dia. hole
9.5±0.1
8.9
1.6
7.2
3.2
6.4±0.2
0.5
2.5 dia.
5.1
Three, 1.6-dia. holes
1.6
19.8
2.2 +0.1
0
dia. hole
9.5±0.1
7.2
8.9
0.5
19.8
Three,
1.2-dia.
holes
2.8±0.2
3.2
6.4±0.2
PCB Terminals
4.8±0.3
PT
2.87±0.1
3.5
1.8
+0.1
2.2 –0
3.4±0.1
6.9 7.7
C
OP
NC
NO
2.2 +0.1
0
dia. hole
2.5 dia.
5.15
7.62±0.2
Three, 1.2±0.1 1.3±0.3
0.5±0.05
Three, 0.8
6.4±0.2
7.62±0.2
9.5±0.1
1.8
4±0.3
19.8
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.25 mm applies to all dimensions
2. Every actual model number includes the code instead of @ for the kind of terminals incorporated by the model.
3. The operating characteristics are for operation in the A direction( )
Solder/Quick-connect Terminal
Pin Plunger Models
SSG-01
SSG-5
SSG-01 -5
SSG-5 -5
Model
A
7.5±0.3
PT
1.8
2.2
+0.1
0
6.9
2.2
C
6.1
NO
3.5
7.7 OP
NC
SSG-01@
SSG-5@
SSG-01@-5
SSG-5@-5
OF max.
153 gf
51 gf
RF min.
25 gf
0.6 mm
OT min.
0.4 mm
MD max.
0.1 mm
FP max.
OP
2.5 dia.
5.1
1.6
2.2 +0.1
0 dia. hole
9.5±0.1
8.9
7.2
0.5
19.8
112
Subminiature Basic Switch
SSG
3.2
6.4±0.2
Three, 1.6-dia. holes
4 gf
PT max.
--8.4±0.3 mm
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.25 mm applies to all dimensions
2. Every actual model number includes the code instead of @ for the kind of terminals incorporated by the model.
3. The operating characteristics are for operation in the A direction( )
Hinge Lever Models
SSG-01L1
SSG-5L1
SSG-01L1 -5
SSG-5L1 -5
Model
A
5.3±0.4
t0.3 Stainless-steel lever
3.6
+0.1
2.2 0
OP
6.9 7.7
2.2
C
NO
FP
NC
6.1
+0.1
0
2.2
2.5 dia.
SSG-01L3
SSG-5L3
SSG-01L3 -5
SSG-51L3 -5
61 gf
20 gf
RF min.
6 gf
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
13.6 mm
A
Model
SSG-01L3@
SSG-5L3@
SSG-01L3@-5
SSG-5L3@-5
OF max.
61 gf
20 gf
RF min.
6 gf
6.3±0.4
1.3R
3.6
t0.3 Stainless-steel lever
FP
+0.1
2.2 0
OP
6.9 7.7
C
6.1
NO
NC
2.2 +0.1
0 dia. hole
2.5 dia.
5.1
1.6
9.5±0.1
8.9
7.2
8.8+1.0/-0.6 mm
Note: Also available are models with a hinge lever
length of 39 mm under the following model
numbers: SSG-01L14@,SSG-5L14@,
SSG01L14@-5, and SSG-5L14@-5. Contact
your OMRON representative for these models.
0.5
2.2
2 gf
PT max.
Three, 1.6-dia. holes
19.8
Simulated Roller Lever Models
OF max.
OP
3.2
6.4+0.2
7.2
8.9
SSG-01L1@-5
SSG-5L1@-5
dia. hole
9.5±0.1
5.1
1.6
SSG-01L1@
SSG-5L1@
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
15.5 mm
OP
3.2
6.4±0.2
2 gf
PT max.
10.7+1.0/-0.6 mm
Three, 1.6-dia. holes
0.5
19.8
Hinge Roller Lever Models
SSG-01L2
SSG-5L2
SSG-01L2 -5
SSG-5L2 -5
A
4.8 dia. × 3.2
Acetal resin roller
5±0.4
Model
t0.3 Stainless-steel lever
OP
+0.1
2.2 –0
FP
6.9 7.7
2.2
C
NO
NC
6.1
+0.1
2.2 0
dia. hole
SSG-01L2@
SSG-5L2@
SSG-01L2@-5
SSG-5L2@-5
OF max.
61 gf
20 gf
RF min.
6 gf
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
19.0 mm
OP
2.5 dia.
5.1
1.6
3.2
6.4±0.2
9.5±0.1
7.2
8.9
2 gf
PT max.
14.5+1.0/-0.6 mm
Three, 1.6-dia. holes
0.5
19.8
PCB Terminal
Pin Plunger
SSG-01P
SSG-5P
SSG-01P-5
SSG-5P-5
A
Model
4.8±0.3
PT
2.87±0.1
3.5
1.8
+0.1
2.2 –0
3.4±0.1
6.9 7.7
C
NO
+0.1
2.2 0
2.5 dia.
5.15
7.62±0.2
9.5±0.1
OP
NC
SSG-01P-5
SSG-5P-5
OF max.
153 gf
51 gf
RF min.
25 gf
1.8
4±0.3
4 gf
PT max.
0.6 mm
OT min.
0.4 mm
MD max.
0.1 mm
FP max.
dia. hole
Three, 1.2±0.1 1.3±0.3
0.5±0.05
Three, 0.8
6.4±0.2
7.62±0.2
SSG-01P
SSG-5P
OP
--11.8±0.4 mm
19.8
Subminiature Basic Switch
SSG
113
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.25 mm applies to all dimensions
2. The operating characteristics are for operation in the A direction( )
Hinge Lever Models
SSG-01L1P
SSG-5L1P
SSG-01L1P-5
SSG-5L1P-5
Model
5.3±0.4
t0.3 Stainless-steel lever
A
3.6
2.87±0.1
+0.1
2.2 0
6.9 7.7
3.4±0.1
C
NO
FP
OP
NC
+0.1
2.2 0
2.5 dia.
5.15
7.62±0.2
dia. hole
Three, 1.2±0.1
Three, 0.8
7.62±0.2
9.5±0.1
1.3±0.3
0.5±0.05
6.4±0.2
1.8
4±0.3
SSG-01L1P
SSG-5L1P
SSG-01L1P-5
SSG-5L1P-5
OF max.
61 gf
20 gf
RF min.
6 gf
2 gf
PT max.
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
17.0 mm
OP
12.2+1.1/-0.7 mm
Note: Also available are models with a hinge lever
length of 39 mm under the following model
numbers: SSG-01L14@,SSG-5L14@,
SSG01L14@-5, and SSG-5L14@-5. Contact
your OMRON representative for these models.
19.8
Simulated Roller Lever Models
Model
SSG-01L3P
SSG-5L3P
SSG-01L3P-5
SSG-51L3P-5
A
1.3R
6.3±0.4
3.6
t0.3 Stainless-steel lever
2.87±0.1
+0.1
2.2 0
3.4±0.1
6.9 7.7 OP
C
NO
FP
SSG-01L3P
SSG-5L3P
SSG-01L3P-5
SSG-5L3P-5
OF max.
61 gf
20 gf
RF min.
6 gf
2 gf
PT max.
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
18.9 mm
OP
14.4+1.1/-0.7 mm
NC
+0.1
2.5 dia.
5.15
7.62±0.2
2.2 0 dia. hole
Three, 1.2±0.1
Three, 0.8
7.62±0.2
9.5±0.1
1.3±0.3
0.5±0.05
6.4±0.2
1.8
4±0.3
19.8
Hinge Roller Lever Models
Model
SSG-01L2P
SSG-5L2P
SSG-01L2P-5
SSG-5L2P-5
A
4.8 dia. × 3.2
Acetal resin roller
5±0.4
t0.3 Stainless-steel lever
2.87±0.1
6.9 7.7
C
NO
FP
NC
+0.1
2.5 dia.
5.15
7.62±0.2
9.5±0.1
2.2 0 dia. hole
Three, 1.2±0.1
Three, 0.8
7.62±0.2
19.8
114
Subminiature Basic Switch
SSG
SSG-01L2P-5
SSG-5L2P-5
OF max.
61 gf
20 gf
RF min.
6 gf
1.3±0.3
0.5±0.05
6.4±0.2
1.8
4±0.3
2 gf
PT max.
---
OT min.
1.0 mm
MD max.
0.8 mm
FP max.
22.4 mm
OP
OP
+0.1
2.2 0
3.4±0.1
SSG-01L2P
SSG-5L2P
17.9+1.1/-0.7 mm
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
■ Cautions
Mounting
Handling
Mount the switch onto a flat surface. Mounting on an uneven surface
may cause deformation of the switch, resulting in faulty operation or
breakage in the housing.
Turn OFF the power supply before mounting or removing the switch,
wiring, or performing maintenance for inspection. Failure to do so
may result in electric shock or burning
Operating Stroke
Terminal Connection
Make sure that the operating stroke is 70% to 100% of the rated OT
distance. Do not operate the actuator exceeding the OT distance,
otherwise the life expectancy of the switch may be shortened.
When soldering the lead wire to the terminal, first insert the lead wire
conductor through the terminal hole and then solder.
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Make sure that the capacity of the soldering iron is 60 W maximum.
Do not take more than 5 seconds to solder the switch terminal.
Improper soldering involving an excessively high temperature or
excessive soldering time may deteriorate the characteristics of the
switch.
Be sure to apply only the minimum required amount of flux. The
switch may have contact failures if flux intrudes in the interior of the
switch.
Use the following lead wires to connect to the solder terminals;
Model
Conductor size
SSG-01
AWG 22 to 20
SSG-5
AWG 20 to 18
To automatically solder the Switch to a PCB in a soldering bath, complete soldering within 5 seconds at a flux temperature of 250°C and
avoid the overflow of flux onto the surface of the PCB where the
Switch or other parts are mounted.
Wire the quick-connect terminals (#110) with receptacles. Insert the
terminals straight into the receptacles. Do not impose excessive
force on the terminal in the horizontal direction, otherwise the terminal may be deformed or the housing may be damaged.
Insulation Distance
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Use a separator between the switch and metal mounting panels, to
ensure proper dielectric characteristics are achieved.
The Switch does not have a ground terminal. The minimum distance
through insulation (IEC61058-1) is 0.9 mm. If proper insulation for
the end product cannot be secured, additional insulation such as a
Separator or insulation cover should be attached.
Subminiature Basic Switch
SSG
115
MEMO
116
Subminiature Basic Switch
SSG
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Subminiature Basic Switch
SSG
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X303-E-1
11/09
Subminiature Basic Switch
Specifications subject to change without notice
SSG
Printed in USA