Composite Backshells 380-130 Composite Knit-Braid Style EMI/RFI Shield Termination Backshell with Qwik-Ty® and Rotatable Coupling Angle and Profile S - Straight CONNECTOR DESIGNATOR: A A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H MIL-DTL-38999 Series I, II Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief Finish Symbol (See Table III) Basic Part Number Cable Entry (See Table IV) MIL-DTL-38999 Series 1.5 (JN1003) 380 MIL-DTL-38999 Series III and IV ROTATABLE COUPLING S 130 XM 15 - 01 Strain Relief Style .390 (10.0) SB - Shrink Boot Groove SBT - Shrink Boot Groove with boot supplied (Omit for none) G E D DIA C SB Connector Shell Size (See Table II) Connector Designator A, F, L and H 1.300 +.02 (33.0 + 0.5) B H F Equally Spaced Holes to Accommodate Knit Braid 107-044 Self-Locking Rotatable Coupling (See Note 4) D E Optional Shrink Boot Groove TABLE II: SHELL SIZE Entry D Code** +.010 (0.25) 00 .268 (6.8) 01 .354 (9.0) 02 .472 (12.0) 03 .591 (15.0) 04 .709 (18.0) 05 .837 (21.3) 06 .945 (24.0) 07 1.063 (27.0) 08 1.191 (30.3) 09 1.319 (33.5) Shell Shell Size Max Entry Size Max Entry F/L H Code** A Code** 08 09 08 01 00 10 11 10 02 01 12 13 12 03 02 14 15 14 04 03 16 17 16 05 04 18 19 18 06 05 20 21 20 07 06 22 23 22 08 07 24 25 24 09 08 TABLE IV: CABLE ENTRY E F G +.020 (0.50) +.020 (0.50) +.020 (0.50) .187 (4.8) .312 (7.9) .512 (13.0) .187 (4.8) .312 (7.9) .512 (13.0) .187 (4.8) .312 (7.9) .512 (13.0) .187 (4.8) .312 (7.9) .630 (16.0) .219 (5.6) .369 (9.4) .630 (16.0) .219 (5.6) .369 (9.4) .630 (16.0) .219 (5.6) .369 (9.4) .630 (16.0) .250 (6.4) .437 (11.1) .630 (16.0) .250 (6.4) .437 (11.1) .630 (16.0) .250 (6.4) .437 (11.1) .630 (16.0) Oval Holes, .256 (6.5) x .512 (13.0) F G Oval Holes, .315 (8.0) x .512 (13.0) Number of Holes 2 2 2 2 2 2 2 4 4 4 Circular Holes, .512 (13.0) Diameter. APPLICATION NOTES TABLE III: FINISH Finish Description 1. For effective grounding, connector with conductive finish should be used. XM 2000 Hour Corrosion Resistant Electroless Nickel 2. Coupling nut supplied unplated. 3. Metric dimensions (mm) are in parentheses and are for reference only. XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 4. Connector Code H supplied with black coupling nut. 5. Consult factory for additional entry sizes available. XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel 6. For angled part requirements, use in conjunction with Glenair 327-060 Extenders. 7. See Table I in Intro for additional connector front-end dimensional details. Symbol © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-52