38 380-010 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Standard Profile CONNECTOR DESIGNATORS * 380 F J 010 M 16 05 F A-B -C-D-E-F G-H-J-K-L-S Strain Relief Style (F, G) Connector Designator Cable Entry (Table V, VI) Shell Size (Table I) * Conn. Desig. B See Note 3 Angle and Profile H = 45° J = 90° See page 38-58 for straight DIRECT COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION A Thread (Table I) Product Series Finish (Table II) Basic Part No. J E J G (Table III) (Table IV) (Table III) (Table IV) F (Table IV) B Typ. (Table I) H (Table IV) STYLE G Light Duty (Table VI) STYLE F Light Duty (Table V) .072 (1.8) Max .416 (10.5) Max Cable Range © 2005 Glenair, Inc. Cable Entry K CAGE Code 06324 L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 60 www.glenair.com 38 380-010 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Standard Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 01 .639 (16.2) .940 (23.9) .750 (19.1) 02 .639 (16.2) .940 (23.9) .750 (19.1) 03 .664 (16.9) .970 (24.6) .810 (20.6) 04 .688 (17.5) .990 (25.1) .870 (22.1) 05 .732 (18.6) 1.040 (26.4) .980 (24.9) 06 .748 (19.0) 1.050 (26.7) 1.020 (25.9) 07 .773 (19.6) 1.070 (27.2) 1.080 (27.4) 08 .800 (20.3) 1.110 (28.2) 1.140 (29.0) 09 .823 (20.9) 1.140 (29.0) 1.200 (30.5) 10 1.041 (26.4) 1.310 (33.3) 1.480 (37.6) Dash No. 02 03 04 05 06 07 08 10 See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE II: STANDARD FINISHES TABLE V: CABLE ENTRY Cable Range K Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .312 (7.9) .500 (12.7) 1.218 (30.9) .437 (11.1) .625 (15.9) 1.343 (34.1) .562 (14.3) .750 (19.1) 1.468 (37.3) .687 (17.4) .875 (22.2) 1.593 (40.5) .812 (20.6) 1.000 (25.4) 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) © 2005 Glenair, Inc. GLENAIR SYMBOL B M NF H Max 1.050 (26.7) 1.050 (26.7) 1.110 (28.2) 1.170 (29.7) 1.300 (33.0) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.530 (38.9) 1.770 (45.0) CAGE Code 06324 FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY Cable Entry L Max Max .656 (16.7) .125 (3.2) .781 (19.8) .250 (6.4) .906 (23.0) .375 (9.5) .500 (12.7) 1.031 (26.2) 1.156 (29.4) .625 (15.9) 1.281 (32.5) .750 (19.1) 1.406 (35.7) .875 (22.2) 1.531 (38.9) 1.000 (25.4) 1.656 (42.1) 1.125 (28.6) 1.781 (45.2) 1.250 (31.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 61 www.glenair.com