STP12IE90F4 Emitter Switched Bipolar Transistor ESBT® 900 V - 12 A - 0.083 Ω General features VCS(ON) IC 1V 12A RCS(ON) 0.083 ■ High voltage / high current Cascode configuration ■ Low equivalent on resistance ■ Very fast-switch up to 150 kHz ■ Squared RBSOA up to 900V ■ Very low Ciss driven by RG = 47Ω ■ Very low turn-off cross over time W TO220FP-4L Internal schematic diagrams Applications ■ Flyback SMPS for adapter ■ Flyback / forward SMPS for desktop Description The STP12IE90F4 is manufactured in Monolithic ESBT Technology, aimed to provide best performances in high frequency / high voltage applications. It is designed for use in Gate Driven based topologies. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 00 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 Order codes Part Number Marking Package Packing STP12IE90F4 P12IE90F4 TO220FP-4L Tube January 2007 Rev 2 1/11 www.st.com 11 STP12IE90F4 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 STP12IE90F4 1 Electrical ratings Electrical ratings Table 1. Absolute maximum rating Symbol Parameter Value Unit VCS(SS) Collector-source voltage (V BS = VGS = 0 V) 900 V VBS(OS) Base-source voltage (IC = 0, V GS = 0 V) 30 V VSB(OS) Source-base voltage (IC = 0, V GS = 0 V) 17 V ± 17 V Collector current 12 A Collector peak current (tP < 5ms) 36 A Base current 6 A IBM Base peak current (tP < 5ms) 10 A Ptot Total dissipation at T c = 25°C 21 W Tstg Storage temperature -40 to 150 °C 150 °C Value Unit 6 °C/W VGS IC ICM IB TJ Table 2. Symbol Rthj-case Gate-source voltage Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case __max 3/11 Electrical characteristics 2 STP12IE90F4 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol Parameter ICS(SS) Collector-source current (VBS = V GS = 0) VCE = 900V 100 µA IBS(OS) Base-source current (IC = 0, VGS = 0) VBS(OS) = 30V 10 µA ISB(OS) Source-base current (IC = 0, VGS = 0) VSB(OS) = 17V 100 µA IGS(OS) Gate-source leakage VGS = ± 17V 100 nA VCS(ON) Collector-source ON voltage VGS = 10V _IC = 12A IB = 2.4A VGS = 10V_ IC = 6A IB = 0.6A 1 0.6 VGS = 10V_ IC = 12A VCS = 1V 5 15 hFE DC current gain VBS(ON) Base Source ON voltage VGS(th) Gate threshold voltage Ciss QGS(tot) ts tf ts tf VCSW 4/11 Electrical characteristics Input capacitance Gate-source Charge Test Conditions Min. VGS = 10V_ IC = 6A_ VCS = 1V VGS = 10V_ IC = 12A IB = 2.4A VCS =25V 2 f =1MHz VGS=0V VCS=25V VGS=10V VCB=0V IC =4A INDUCTIVE LOAD Storage time Fall time VGS =10V RG =47Ω VClamp =720V tp =4µs INDUCTIVE LOAD Storage time Fall time VGS =10V RG =47Ω VClamp =720V tp =4µs IC =6A IB =0.6A Maximum collectorsource voltage switched without snubber RG =47Ω IC = 12A hFE =5 IC =6A V V 1.5 1.2 VGS = 10V_ IC = 6A_ IB = 0.6A VBS = VGS ______IB = 250µA Typ. Max. Unit IB =1.2A 900 3 V V 4 V 520 pF 21.3 nC 610 ns 10 ns 360 ns 10 ns V STP12IE90F4 Electrical characteristics Table 3. Symbol VCS(dyn) VCS(dyn) 2.1 Electrical characteristics Parameter Collector-source dynamic voltage (500ns) Collector-source dynamic voltage (1µs) Test Conditions Min. VCC =VClamp =400V IC = 6A VGS =10V IB = 1.2A tpeak =500ns RG =47Ω IBpeak = 6A (IC ) VCC =VClamp =400V IC = 6A VGS =10V IB = 1.2A tpeak =500ns RG =47Ω IBpeak = 6A (IC ) Typ. Max. Unit 3.37 V 1.75 V Electrical characteristics (curves) Figure 1. DC current gain Figure 2. Collector-source On voltage Figure 3. Collector-source On voltage Figure 4. Base-source On voltage 5/11 Electrical characteristics 6/11 STP12IE90F4 Figure 5. Reverse biased SOA Figure 6. Figure 7. Inductive load switching time Figure 8. Dynamic collector-emitter voltage Inductive load switching time STP12IE90F4 2.2 Electrical characteristics Test circuits Figure 9. Static VCS(ON) test circuits Figure 10. Inductive load switching and RBSOA test circuit 7/11 Package mechanical data 3 STP12IE90F4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 STP12IE90F4 Package mechanical data TO220FP-4L MECHANICAL DATA DIM. mm. MIN. A 4.30 A1 2.60 A2 1.30 b 0.50 b1 1.05 TYP 4.70 3 1.50 1.30 1.25 b4 1.50 c 0.45 D 15.50 E 9.80 e 2.29 e1 H1 1.70 0.70 b2 b3 MAX. 0.50 0.60 15.90 10.20 2.54 2.79 7.62 6.30 L 6.70 13.60 L1 3.30 L2 15.40 15.80 Dia P 3 3.40 Q 3.30 3.50 9/11 Revision history STP12IE90F4 4 Revision history Table 4. Revision history Date Revision 28-Jul-2006 1 Initial release. 16-Jan-2007 2 New graphics 10/11 Changes STP12IE90F4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11