STPSC1006D 600 V power Schottky silicon carbide diode Features ■ No or negligible reverse recovery ■ Switching behavior independent of temperature ■ Particularly suitable in PFC boost diode function A Description K The SiC diode is an ultrahigh performance power Schottky diode. It is manufactured using a silicon carbide substrate. The wide bandgap material allows the design of a Schottky diode structure with a 600 V rating. Due to the Schottky construction no recovery is shown at turn-off and ringing patterns are negligible. The minimal capacitive turn-off behavior is independent of temperature. ST SiC diodes will boost the performance of PFC operations in hard switching conditions. May 2008 TO-220AC STPSC1006D Table 1. Rev 1 Device summary IF(AV) 10 A VRRM 600 V Tj (max) 175 °C QC (typ) 12 nC 1/7 www.st.com 7 Characteristics 1 STPSC1006D Characteristics Table 2. Absolute ratings (limiting values at 25 °C unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) RMS forward current 18 A Continuous forward current TC = 115 °C 10 A IFSM IF Surge non repetitive forward current tp = 10 ms sinusoidal 40 A IFRM Repetitive peak forward current δ = 0.1, TC = 110 °C, Tj = 150 °C 40 A Tstg Storage temperature range -55 to +175 °C Operating junction temperature -40 to +175 °C Tj Table 3. Thermal resistance Symbol Rth(j-c) Table 4. Symbol Parameter Value Unit 2 °C/W Junction to case Static electrical characteristics (per diode) Parameter IR (1) Reverse leakage current VF (2) Forward voltage drop Tests conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Min. VR = VRRM IF = 10 A Typ Max. 30 300 210 1500 1.4 1.7 1.6 2.1 Unit µA V 1. tp = 10 ms, δ < 2% 2. tp = 500 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 1.2 x IF(AV) + 0.09 x IF2(RMS) Table 5. Symbol 2/7 Other parameters Parameter Test conditions Typ Unit Qc Total capacitive charge Vr = 400 V, IF = 10 A dIF/dt = -200 A/µs Tj = 150 °C 12 nC C Total capacitance Vr = 0 V, Tc = 25 °C, F = 1 Mhz 650 pF STPSC1006D Figure 1. Characteristics Forward voltage drop versus forward current (typical values) Figure 2. IFM(A) 20 1.E+04 Reverse leakage current versus reverse voltage applied (maximum values) IR(µA) 18 Tj=175 °C 16 1.E+03 14 Tj=25 °C Tj=150 °C Tj=150 °C 12 1.E+02 10 Tj=175 °C 1.E+01 8 6 1.E+00 4 Tj=25 °C VR(V) VFM(V) 2 1.E-01 0 0.0 0.5 Figure 3. 70 1.0 1.5 2.0 2.5 0 3.0 Peak forward current versus case temperature Figure 4. IM(A) 100 150 200 250 300 350 400 450 500 550 600 Junction capacitance versus reverse voltage applied (typical values) C(pF) 500 T F=1 MHz VOSC=30 mVRMS Tj=25 °C 450 δ=0.1 60 50 δ=tp/T tp 400 50 350 300 40 30 δ=0.3 250 δ=0.5 200 150 20 100 δ=1 10 δ=0.7 VR(V) 50 TC(°C) 0 0 0 25 50 75 100 125 150 175 1 10 100 1000 3/7 Characteristics Figure 5. 1.0 STPSC1006D Relative variation of thermal impedance junction to case versus pulse duration Figure 6. Non-repetitive peak surge forward current versus pulse duration (sinusoidal waveform, typical values) IFSM(A) Zth(j-c)/Rth(j-c) 1.E+03 0.9 0.8 0.7 1.E+02 Tj=25 °C 0.6 0.5 Tj=125 °C 0.4 1.E+01 0.3 0.2 0.1 tp(s) Single pulse tp(s) 0.0 1.E-05 Figure 7. 1.E+00 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E-05 1.E-04 1.E-03 Total capacitive charges versus dIF/dt (typical values) QC(nC) 18 IF=10A VR=400 V Tj=150 °C 16 14 12 10 8 6 4 dIF/dt(A/µs) 2 0 0 4/7 50 100 150 200 250 300 350 400 450 500 1.E-02 1.E-01 1.E+00 STPSC1006D 2 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: C ● Recommended torque value: 0.4 to 0.6 N·m In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. Table 6. TO-220AC Dimensions Dimensions Ref. A H2 ØI C L5 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L7 L6 L2 F1 D L9 L2 L4 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 F M E G M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/7 Ordering information 3 Ordering information Table 7. 4 Ordering information Order code Marking Package Weight Base qty Delivery mode STPSC1006D STPSC1006D TO-220AC 1.86 g 50 Tube Revision history Table 8. 6/7 STPSC1006D Document revision history Date Revision 05-May-2008 1 Description of changes First issue STPSC1006D Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7