Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs HF Sx02xS Series Description New 1.5 Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR’s junctions are glasspassivated to ensure long term reliability and parametric stability. Features t3P)4DPNQMJBOUBOE Halogen-Free t)JHIEWEUOPJTFJNNVOJUZ t5ISVIPMFBOETVSGBDF mount packages t4VSHF capability > 15Amps Main Features Symbol IT(RMS) VDRM / VRRM IGT Value Unit 1.5 A 400 to 600 V 200 μA t*NQSPWFEUVSOPGG time (tq) < 35 μsec. t4FOTJUJWFHBUFGPSEJSFDU microprocessor interface t#MPDLJOHWPMUBHF (VDRM / VRRM ) capability — up to 600V Schematic Symbol A Applications The Sx02xS EV series is specifically designed for Gas Ignition applications that require high pulse surge current capability. G K Absolute Maximum Ratings Symbol IT(RMS) RMS on-state current (full sine wave) IT(AV) Average on-state current ITSM Non repetitive surge peak on-state current (Single cycle, TJ initial = 25°C) I2t I2t Value for fusing di/dt IGM PG(AV) Tstg TJ Sx02xS Series Parameter TO-92 TC = 65°C SOT-223 TL = 95°C TO-92 TC = 65°C SOT-223 TC = 95°C Value Unit 1.5 A 0.95 A F = 50 Hz 12.5 F = 60 Hz 15.0 tp = 10 ms F = 50 Hz 0.78 tp = 8.3 ms F = 60 Hz 0.93 Critical rate of rise of on-state current IG = 10mA TO-92 SOT-223 TJ = 125°C 50 A/μs Peak gate current tp = 10 μs TJ = 125°C 1.0 A TJ = 125°C 0.1 W Storage junction temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Average gate power dissipation 201 Revised: December 22, 2010 09:54 AM TO-92 SOT-223 A A2s ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Description Sx02xS Test Conditions Unit Min Max 15 200 μA — 0.8 V IGT DC Gate Trigger Current VGT DC Gate Trigger Voltage VD = 12V RL = 60 Ω Peak Reverse Gate Voltage IRG = 10μA 5 — V Holding Current RGK = 1 kΩ — 5 mA Critical Rate-of-Rise of Off-State Voltage TJ = 125°C VD = VDRM / VRRM Exponential Waveform RGK = 1 kΩ 25 — V/μs tq Turn-Off Time TJ = 125°C @ 600 V RGK = 1 kΩ — 35 μs tgt Turn-On Time IG = 10mA PW = 15μsec IT = 3.0A (pk) — 3 μs VGRM IH (dv/dt)s Static Characteristics (TJ = 25°C, unless otherwise specified) Symbol VTM IDRM Description Test Conditions Peak On-State Voltage Off-State Current, Peak Repetitive Value Unit Min Max ITM = 3.0A (pk) — 1.70 V TJ = 25°C @ VD= VDRM RGK = 1 kΩ — 5 μA TJ = 125°C @ VD= VDRM RGK = 1 kΩ — 500 μA Thermal Resistances Symbol 1 Description Rth(j-c) Junction to case (AC) Rth(j-a) Junction to ambient Test Conditions IT = 1.5A (RMS)1 IT = 1.5A (RMS)1 Value TO-92 50 SOT-223 25 TO-92 160 SOT-223 60 Unit °C/W °C/W 60Hz AC resistive load condition, 100% conduction. Sx02xS Series 202 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: Normalized DC Holding Current vs. Junction Temperature 2.0 2.0 Normalized Holding Current (IH @ TJ / IH @25∞C) Normalized Gate: Trigger Current IGT @ Tj / IGT@ 25ºC 2.5 1.5 1.0 0.5 1.5 1.0 0.5 0.0 0.0 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 -40 +125 Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature +5 +20 +35 +50 +65 +80 +95 +110 1.0 0.5 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o 1.0 0.5 0.0 0.0 Junction Temperature (TJ) °C 0.5 1.0 RMS On-state Current [IT(RMS)] (Amps) Max Allowable Case Temperature, TC (Celsius) Figure 5: Maximum Allowable Case Temperature vs. On-State Current 130 120 SOT-223 110 100 TO-92 90 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings 70 60 50 0.0 0.5 1.0 1.5 RMS On-state Current [IT (RMS)] (Amps) Sx02xS Series +125 1.5 Average Power Dissipation, PD (Watts) (VGT @ Tj / VGT @ 25ºC) -10 Figure 4: Power Dissipation (Typical) vs. RMS On-State Current 1.5 Normalized Gate: Trigger Voltage -25 Junction Temperature (TJ) °C Junction Temperature (TJ) °C 203 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 1.5 Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Figure 6: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-State Current (ITSM) – Amps. 20 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature 15 12 10 9 8 7 6 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 5 1.5 4 AD evic es 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration – Full Cycle Soldering Parameters Reflow Condition Pb – Free assembly tP - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow Sx02xS Series 150°C - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds +0/-5 Temperature TP Ramp-up TL tL TS(max) Preheat TS(min) Ramp-do Ramp-down tS 25 Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C time to peak temperature Time °C 204 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated. Body Material UL recognized epoxy meeting flammability classification 94V-0. Lead Material Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-92 (E Package) Inches A Millimeters Dimensions TC MEASURING POINT B SEATING PLANE C GATE Min Max Min Max A 0.175 0.205 4.450 5.200 # 0.170 0.210 4.320 5.330 C 0.500 D 0.135 E 0.125 0.165 3.180 4.190 F 0.080 0.105 2.040 2.660 G 0.016 0.021 0.407 0.533 H 0.045 0.055 1.150 1.390 I 0.095 0.105 2.420 2.660 J 0.015 0.020 0.380 0.500 12.70 3.430 ANODE G H CATHODE I D F J E F Sx02xS Series 205 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Dimensions – SOT-223 Anode Gate Cathode Inches Anode Pad Layout for SOT-223 3.3 (0.130”) 1.5 (0.059”) 1.2 (0.047”) 6.4 (0.252”) 2.3 (0.091”) Millimeters Dimensions (3x) 1.5 (0.059”) 4.6 (0.181”) Min Typ Max Min Typ Max A 0.248 0.256 0.264 6.30 6.50 6.70 # 0.130 0.138 0.146 3.30 3.50 3.70 C — — 0.071 — — 1.80 D 0.001 — 0.004 0.02 — 0.10 E 0.114 0.118 0.124 2.90 3.00 3.15 F 0.024 0.027 0.034 0.60 0.70 0.85 G — 0.090 — — 2.30 — H — 0.181 — — 4.60 — I 0.264 0.276 0.287 6.70 7.00 7.30 J 0.009 0.010 0.014 0.24 0.26 0.35 Dimensions in Millimeters (Inches) K 10° MAX Product Selector Voltage Part Number Gate Sensitivity Package — 200μA TO-92 — X 200μA TO-92 S402TS X — 200μA SOT-223 S602TS — X 200μA SOT-223 400V 600V S402ES X S602ES Packing Options Part Number Marking Weight Packing Mode Base Quantity Sx02ES Sx02ES 0.170 g #VML 2500 Sx02ESAP Sx02ES 0.170 g Ammo Pack 2000 Sx02ESRP Sx02ES 0.170 g Tape & Reel 2000 Sx02TSRP Sx02TS 0.120 g Tape & Reel 1000 Note: x = voltage Sx02xS Series 206 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards 1.6 (41.0) 0.02 (0.5) 0.236 (6.0) 0.708 (18.0) 0.098 (2.5) MAX 1.26 (32.0) 0.354 (9.0) 0.5 (12.7) Anode Cathode 0.2 (5.08) Gate 0.1 (2.54) 0.157 DIA (4.0) 14.17(360.0) Flat up 1.97 (50.0) Dimensions are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.5 (12.7) Anode 0.1 (2.54) 0.2 (5.08) 0.157 (4.0) DIA Cathode Gate Flat down n of Feed Directio 25 Devices per fold 1.85 (47.0) 12.2 (310.0) 1.85 (47.0) Dimensions are in inches (and millimeters). 13.3 (338.0) Sx02xS Series 207 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs SOT-223 Reel Pack (RP) Specifications 8 mm 4 mm 1.5 mm 2 mm A 1.75 mm 5.5 mm 12 mm K GATE A 180 mm 13 mm Abor Hole Diameter 13.4 mm Part Marking System Part Numbering System S x 02 x xx xx SCR SERIES PACKING TYPE Blank: Bulk RP: Reel Pack (TO-92) : Embossed Carrier Pack (SOT-223) AP: Ammo Pack (TO-92) VOLTAGE 4: 400V 6: 600V CURRENT 02: 1.5A A YM XX YM XXX SENSITIVITY S: 200μA Sensitive SCR X K A G K PACKAGE TYPE E: TO-92 T: SOT-223 Sx02xS Series G A 208 Revised: December 22, 2010 09:54 AM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.