SEMTECH SX8653ICSTRT1

SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
-----4
KEY PRODUCT FEATURES
GENERAL DESCRIPTION
The SX8653 is a touch controller for 4 or 5 wire resistive
touchscreen. With 4-wire touchscreen, the multitouch
feature enables a completely different user interaction. It
enables detection of 2 fingers on the touchscreen and
several gestures like rotation and pinch/ stretch.
It features a wide input supply range from 1.65V to 3.7V and
low power modes to preserve current when the screen is
unintentionally touched.
To compute touch screen X-Y coordinates and touch
pressure with precision, a low power 12-bit analog-digital
converter is activated with the possibility to enable on-chip
data averaging processing algorithms to reduce host activity
and suppress system noise.
The touch screen controller inputs have been specially
designed to provide robust on-chip ESD protection of up to
±15kV in both HBM and Contact Discharge, and eliminates
the need for external protection devices. The SX8653 is
controlled by a high speed SPI™ serial interface.
The SX8653 is available in a 4.0 mm x 3.0 mm 14-DFN
package and a 1.5 mm x 2.0 mm wafer level chip scale
package (WLCSP) for space conscience applications.
APPLICATIONS
DSC, DVR, Cell Phones
PDA, Pagers
Point-of-Sales Terminals
Touch-Screen Monitors
ORDERING INFORMATION
Part Number
Package (Dimension in mm)
Marking
SX8653ICSTRT1
12 - Ball WLCSP (1.5x2.0)
NB2A
SX8653IWLTRT1
14 - Lead DFN (4.0x 3.0)
NB2A
Extremely Low Power Consumption: [email protected] 8kSPS
Support Multi-touch operation (4-wire)
Superior On-chip ESD Protection
±15kV HBM (X+,X-,Y+,Y-)
±2kV CDM
±25kV Air Gap Discharge
±15kV Contact Discharge
±300V MM
Pin-compatible with SX8652
Single 1.65V to 3.7V Supply/Reference
4-Wire or 5-Wire Resistive Touch Screen Interface
Integrated Preprocessing Block to Reduce Host Loading
and Bus Activity
Four User Programmable Operation Modes provides
Flexibility to address Different Application Needs
Manual, Automatic, Pen Detect, Pen Trigger
Precision, Low Noise, High Speed 12-bit SAR ADC
Operating At 74k SPS
Throughput: 5000 (X-Y) coordinates/second (c/s) with 7Sample Averaging
Low Power Shut-Down Mode < 1uA
Hardware & Software reset
SPI™ Serial Interface
Touch Pressure Measurement (4-Wire)
Auxiliary Input (4-Wire) For Alternate ADC Input or Start
of Conversion Trigger
-40°C to +85°C operation
Pb-Free, Halogen Free, RoHS/WEEE compliant product
Windows CE 6.0, Linux Driver Support Available
Packages: 14-LD (4.0 mm x 3.0 mm) DFN
12-Ball (1.5 mm x 2.0 mm) WLCSP
1. 3000 Units / reel
VD D
S X 8653
VD D
C ontrol
N IR Q
A U X /W IP ER
N R S T (D FN only)
PO R
To the
touch
screen
SPI
X +/BR
Y+/TR
Touch
Screen
Interface
SC LK
ref+
X -/TL
Y-/BL
Vref
NCS
O SC
in
AD C out
ref-
D ig ital
Filter
T o the
H ost
DOUT
D IN
GND
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 1
www.semtech.com
SX8653
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
Table of contents
Section
1.
2.
3.
4.
5.
Page
General Description ................................................................................................................................................. 4
1.1.
DFN Pinout Diagram and Marking Information (Top View).............................................................................. 4
1.2.
WLCSP Pinout Diagram and Marking Information (Top View) ........................................................................ 4
1.3.
Pin Description................................................................................................................................................. 5
1.4.
Simplified Block Diagram ................................................................................................................................. 5
Electrical Characteristics ......................................................................................................................................... 6
2.1.
Absolute Maximum Ratings ............................................................................................................................. 6
2.2.
Recommended Operating Conditions.............................................................................................................. 6
2.3.
Thermal Characteristics ................................................................................................................................... 6
2.4.
Electrical Specifications ................................................................................................................................... 7
2.5.
Host Interface Specifications ........................................................................................................................... 9
2.6.
Host Interface Timing Waveforms.................................................................................................................... 9
Functional Description ........................................................................................................................................... 10
3.1.
General Introduction ..................................................................................................................................... 10
3.2.
Device Interface and ESD protection............................................................................................................. 11
3.2.1.
Touchscreen interface............................................................................................................................. 11
3.2.2.
Host Interface and Control Pins .............................................................................................................. 11
4-wire Touch Screen Detailed Description ............................................................................................................ 12
4.1.
Touch Screen Operation................................................................................................................................ 12
4.2.
Coordinates Measurement............................................................................................................................. 12
4.3.
Pressure Measurement.................................................................................................................................. 13
4.4.
Pen Detection ................................................................................................................................................ 13
4.5.
Double touch measurement........................................................................................................................... 14
5-wire Touch Screen Detailed Description ............................................................................................................ 15
5.1.
Touch Screen Operation................................................................................................................................ 15
5.2.
Coordinates Measurement............................................................................................................................. 15
5.3.
Pen Detection ................................................................................................................................................ 15
6.
Data Processing .................................................................................................................................................... 16
7.
Power-Up, Reset ................................................................................................................................................... 16
8.
Modes of Operation ............................................................................................................................................... 16
9.
8.1.
MANual Mode ................................................................................................................................................ 17
8.2.
AUTOmatic mode .......................................................................................................................................... 17
8.3.
PENDET Mode .............................................................................................................................................. 18
8.4.
PENTRIG Mode ............................................................................................................................................. 18
Host Interface ........................................................................................................................................................ 20
9.1.
SPI Read/Write Registers .............................................................................................................................. 20
9.2.
SPI Reading Channel Data............................................................................................................................ 20
9.3.
SPI implementation and multiple Read/Write ................................................................................................ 21
9.4.
Invalid Qualified Data..................................................................................................................................... 22
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 2
www.semtech.com
SX8653
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
Table of contents
Section
10.
Page
9.5.
Register Map................................................................................................................................................. 23
9.6.
SX8653 register ............................................................................................................................................ 24
Application Information ......................................................................................................................................... 25
10.1. Acquisition Setup ........................................................................................................................................... 25
10.2. Channel Selection.......................................................................................................................................... 25
10.3. Noise Reduction............................................................................................................................................. 25
10.3.1. POWDLY................................................................................................................................................. 25
10.3.2. SETDLY .................................................................................................................................................. 26
10.4. AUX Input - 4-wire touchscreen only ............................................................................................................. 26
10.5. Interrupt Generation....................................................................................................................................... 26
10.6. Coordinate Throughput Rate ......................................................................................................................... 26
10.6.1. SPI Communication Time ....................................................................................................................... 26
10.6.2. Conversion Time ..................................................................................................................................... 27
10.7. ESD event...................................................................................................................................................... 27
11.
Multi-Touch Gestures with 4-wire touchscreen...................................................................................................... 28
11.1. Zoom Gesture ................................................................................................................................................ 28
11.2. Rotate Gesture............................................................................................................................................... 28
12.
Packaging Information ........................................................................................................................................... 29
12.1. DFN Package................................................................................................................................................. 29
12.2. WLCSP Package ........................................................................................................................................... 30
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 3
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
1. General Description
1.1. DFN Pinout Diagram and Marking Information (Top View)
1
14
(NC)
VDD
2
13
NRST
X+/BR
3
12
NCS
Y+/TR
4
11
NIRQ
X-/TL
5
10
DOUT
Y-/BL
6
9
DIN
GND
7
8
SCLK
15
PIN
1
IDENTIFIER
NB2A
YYWW
XXXXX
AUX/
WIPER
Figure 1. SX8653 DFN Top View, Pad on Bottom Side
YYWW: date code
XXXXX: Lot Number
1.2. WLCSP Pinout Diagram and Marking Information (Top View)
X+/BR
Y+/TR
X-/TL
Y-/BL
NB2A
YYWW
XXXXXX
3
VDD
NCS
DIN
GND
AUX/WIPER
#
NIRQ
DOUT
SCLK
A
B
C
D
2
1
BALL A1 IDENTIFIER
Figure 2. SX8653 WLCSP Top View, Solder Bumps on Bottom Side
YYWW: date code
XXXXX: Lot Number
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 4
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
1.3. Pin Description
Pin Number
#
Name
Type
Description
DFN WLCSP
1
A1
AUX/WIPER Digital Input /
Analog Input
Conversion Synchronization (4-wire) or
Analog Auxiliary Input (4-wire) / Wiper Input (5-wire)
2
A2
VDD
Power Input
Input power supply, connect to a 0.1uF capacitor to GND
3
A3
X+/BR
Analog IO
X+ Right electrode (4-wire) / Bottom Right (5-wire) channel
4
B3
Y+/TR
Analog IO
Y+ Top electrode (4-wire) /Top Right (5-wire) channel
5
C3
X-/TL
Analog IO
X- Left electrode (4-wire) /Top Left (5-wire) channel
6
D3
Y-/BL
Analog IO
Y- Bottom electrode (4-wire) /Bottom Left (5-wire) channel
7
D2
GND
Ground
Ground
8
D1
SCLK
Digital Input
SPI Serial Clock Input
9
C2
DIN
Digital Output
SPI Serial Data Input
10
C1
DOUT
Digital Output
SPI Serial Data Output
11
B1
NIRQ
Digital Output, open drain Interrupt Request Output, Active low, Need external pull-up
12
B2
NCS
Digital Input
SPI Chip Select Input, Active low
13
-
NRST
Digital Input
DFN package only, Reset Input, Active low, Internal pull-up resistor
14
-
(NC)
15
-
GND
Not Connected
Power input
Backside Ground
Table 1. Pin description
1.4. Simplified Block Diagram
The SX8653 simplified block diagram is shown in Figure 3.
VDD
SX8653
VDD
Control
NIRQ
AUX/WIPER
NRST (DFN only)
POR
To the
touch
screen
SPI
X+/BR
Y+/TR
Touch
Screen
Interface
X-/TL
Y-/BL
Vref
NCS
OSC
SCLK
ref+
in
ADC out
ref-
Digital
Filter
To the
Host
DOUT
DIN
GND
Figure 3. Simplified block diagram of the SX8653
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 5
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
2. Electrical Characteristics
2.1. Absolute Maximum Ratings
Stresses above the values listed in “Absolute Maximum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these, or any other conditions beyond the “Recommended Operating
Conditions”, is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameter
Symbol
Min.
Max.
Unit
Supply Voltage
VDDABS
-0.5
3.9
V
Input voltage (non-supply pins)
VIN
-0.5
3.9
V
Input current (non-supply pins)
IIN
10
mA
Operating Junction Temperature
TJCT
125
°C
Reflow temperature
TRE
260
°C
Storage temperature
TSTOR
150
°C
ESD HBM
(Human Body Model)
ESD (Contact Discharge)
± 15(i)
kV
± 8(ii)
kV
ESDHBM2
±2
kV
ESDCD
± 15
kV
ILU
± 100
mA
High ESD pins: X+/BR, X-/TL,
Y+/TR, Y-/BL, Aux/Wiper
ESDHBM1
All pins except high ESD pins
High ESD pins: X+/BR, X-/TL,
Y+/TR, Y-/BL, Aux/Wiper
Latchup(iii)
-50
Table 2. Absolute Maximum Ratings
(i) Tested to TLP (10A)
(ii) Tested to JEDEC standard JESD22-A114
(iii) Tested to JEDEC standard JESD78
2.2. Recommended Operating Conditions
Parameter
Supply Voltage
Ambient Temperature Range
Symbol
Min.
Max
Unit
VDD
1.65V
3.7
V
TA
-40
85
°C
Min.
Max
Unit
Table 3. Recommended Operating Conditions
2.3. Thermal Characteristics
Symbol
Parameter
Thermal Resistance with DFN package - Junction to Ambient (iii)
θJA
39
°C/W
Thermal Resistance with WLCSP package - Junction to Ambient (iii)
θJA
65
°C/W
Table 4. Thermal Characteristics
(iii) θJA is calculated from a package in still air, mounted to 3" x 4.5", 4 layer FR4 PCB with thermal vias under exposed pad (if applicable)
per JESD51 standards.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 6
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
2.4. Electrical Specifications
All values are valid within the recommended operating conditions unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ
Max
Unit
Current consumption
Mode = MANUAL
Ipwd
Converter stopped, pen
detection off, SPI listening,
OSC stopped
0.4
1
uA
Mode = PENDET
Ipndt
Converter stopped, pen
detection activated, device
generates interrupt upon
detection, SPI listening, OSC
stopped
0.4
1
uA
Mode =PENTRIG
Ipntr
Converter stopped, pen
detection activated, device
starts conversion upon pen
detection. SPI listening, OSC
stopped
0.4
1
uA
Mode=AUTO
Iauto
Converter stopped, pen
detection off, SPI listening,
OSC on, timer on
1.5
Operation @8kSPS, VDD=1.8V
Iopl
23
50
uA
Operation @42kSPS, VDD=3.3V Ioph
105
140
uA
uA
Digital I/O
High-level input voltage
VIH
0.8VDD
VDD+0.2
V
Low-level input voltage
VIL
VSS-0.3
0.2VDD
V
VHysLow
VDD > 2V
0.05 VDD
V
VHysHigh
VDD < 2V
0.1 VDD
V
Output Logic High
VOH
IOH>-2mA
0.8VDD
Output Logic Low
VOL
IOL<2mA
0
Input leakage current
LI
CMOS input
High ESD Input - Output
capacitance
CX+/BR ,CX-/TL
,CY+/TR , CY-/BL,
CAUX
50
pF
Input - Output capacitance
CNRST , CNIRQ
,CNCS ,CDIN ,
CDOUT, CSCLK
5
pF
Hysteresis
0.4
V
±1
uA
Table 5. Electrical Specifications
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 7
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
Symbol
Parameter
Conditions
Min.
Typ
Max
Unit
1
ms
Startup
Power-up time
tpor
Time between rising edge VDD
and rising NIRQ
ADC
Resolution
Ares
Offset
Aoff
Gain error
Age
Differential Non Linearity
Integral Non Linearity
12
bits
±1
LSB
0.5
LSB
Adnl
±1
LSB
Ainl
±1.5
LSB
5
Ohm
At full scale
Resistors
X+, X-, Y+, Y- resistance
Rchn
Touch Pad Biasing Resistance
Pen detect resistance
RPNDT_00
RPNDT = 0
100
kOhm
RPNDT_01
RPNDT = 1
200
kOhm
RPNDT_10
RPNDT = 2
50
kOhm
RPNDT_11
RPNDT = 3
25
kOhm
0.1
uF
External components
Capacitor between VDD, GND
recommendations
Cvdd
Type 0402, tolerance +/-50%
Table 5. Electrical Specifications
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 8
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
2.5. Host Interface Specifications
Parameter
Symbol
Condition
Min
Typ
Max
Unit
5000
60
kHz
%
SPI TIMING SPECIFICATIONS (i)
SCLK
Clock Frequency
Duty Cycle
fSCLK
duty
40
NCS edge to first SCLK “↑”
TCSS
50
NCS edge to DOUT Low
TDCD
SCLK High Pulse Width
TCKH
80
SCLK Low Pulse Width
TCKL
80
Data Setup Time
TDS
40
Data Valid to SCLK Hold Time
TDH
70
Data Output Delay after SCLK “↓”
TDOD
NCS “↑” to SCLK Ignored
TCSI
NCS “↑” to DOUT Hi-Z state
TCCZ
NCS Hold Time
TCSW
100
ns
70
50
90
150
(i) All timing specifications refer to voltage levels (50% VDD, VOH, VOL) defined in Table 6 unless otherwise mentioned.
Table 6. Host Interface Specifications
2.6. Host Interface Timing Waveforms
tCSW
CSN
50%VDD
tCSS
tCKL
tDOD
tCKH
tCSI
50%VDD
SCLK
tDH
tDS
DIN
50%VDD
tDCD
tCCZ
DOUT
D11
VOH
VOL
Figure 4. SPI Timing Waveform
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 9
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
3. Functional Description
3.1. General Introduction
This section provides an overview of the SX8653 architecture, device pinout and a typical application.
The SX8653 is designed for 4-wire and 5-wire resistive touch screen applications. The touch screen or touch panel is the
resistive sensor and can be activated by either a finger or stylus. When the top layer is pressed, it makes contact with the
bottom sheet and the touch location can be measured.
As shown in Figure 5 with a 4-wire panel, the touch screen coordinates and touch pressure are converted into SPI format
by the SX8653 for transfer to the host.
The auxiliary input can be used to convert with 12-bit resolution any analog input in the supply range. It can also serves as
an external synchronisation input to trig the touchscreen acquisition as described in the Application Information section.
VDD
SX8653
VDD
HOST
Control
4-wire touchscreen
NIRQ
INT
AUX/WIPER
NRST (DFN only)
X-/TL
Y+/TR
SPI
Touch
Screen
Interface
CS
OSC
SCLK
ref+
Y-/BL
X+/BR
DIO
NCS
in
ADC out
ref-
Vref
Digital
Filter
SCLK
DOUT
MISO
DIN
SPI
Interface
POR
MOSI
GND
Figure 5. SX8653 with a 4-wire touch screen
A 5-wire touchscreen application is shown in Figure 6. The 5-wire top sheet acts as a voltage measuring probe. The
measurement accuracy is not affected by damage on this sheet and consequently the reliability is improved.
Multitouch and touch pressure measurement are not possible with 5-wire touchscreen.
5-wire touchscreen
VDD
SX8653
VDD
HOST
Control
NIRQ
INT
AUX/WIPER
Y+/TR
SPI
Touch
Screen
Interface
OSC
SCLK
ref+
X+/BR
Vref
Y-/BL
NCS
in
ADC out
ref-
Digital
Filter
DOUT
DIN
DIO
CS
SCLK
MISO
SPI
Interface
NRST (DFN only)
POR
X-/TL
MOSI
GND
Figure 6. SX8653 with a 5-wire touch screen
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 10
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
3.2. Device Interface and ESD protection
The touch screen controller inputs have been specially designed to provide robust on-chip ESD protection of up to ±15kV
in both HBM and Contact Discharge.
3.2.1. Touchscreen interface
The X+/BR, X-/TL, Y+/TR,Y-/BL, AUX/WIPER are the pins dedicated for the touchscreen interface. It provides the voltage
sequence in order to obtain the coordinates and pressure measurement.
The five pins are connected to BR, TL, TR, BL, WIPER on a 5-wire touchscreen. They are the electrodes on the 4 corners
of the bottom layer of the touchscreen plus the electrode on the top layer.
On a 4-wire touchscreen, only 4 electrodes are used: X+,X-,Y+,Y-. The AUX pin is not needed and therefore can be used
to convert an analog signal (range GND - VDD) into 12-bit digital value. The touchscreen interface pins are the most
exposed pins for an ESD event.
As shown in Figure 7, theses pins have internal ESD protection to GROUND and VDD.
3.2.2. Host Interface and Control Pins
The SX8653 is a slave device configured via the SPI interface. DIN and SCLK have internal ESD protection to GROUND
and VDD.
NIRQ provides an interrupt to the host processor when a pen is detected or when channel data is available. The NIRQ pin
is an active low, open drain output to facilitate interfacing to different supply voltages and thus requires an external pull-up
resistor (1-10 kOhm).
The host can reset the chip via the SPI interface or with the dedicated pin NRST. The NRST pin is an active low input with
an internal pull-up that provides a hardware reset.
NRST and NIRQ pins are protected to GROUND.
VDD
Power
M anagem ent
GND
X + /B R
R chn
X -/T L
R chn
Y + /T R
R chn
Y - /B L
AUX/
W ip e r
R chn
Touch
S c re e n
D r iv e r s
In te rfa c e
MUX
A
D
C
NRST
C o n tr o l
D a t a P r o c e s s in g
SPI
N IR Q
DIN
SCLK
DOUT
NCS
Figure 7. ESD protection
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 11
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
4. 4-wire Touch Screen Detailed Description
4.1. Touch Screen Operation
A 4-wire resistive touch screen consists of two resistive sheets separated by an insulator (Figure 4.2).
t
Y
ec
el
Y+
Y+
tro
Contact point
R3 with the top
conductive
sheet
de
shee
c tiv e
u
d
n
co
T op
Y+
s
Rytot
Bo
Y-
m
tto
X+
R4
co
nd
X-
t
uc
e
iv
e
sh
et
X e le
es
c tro d
YTop conductive sheet before
the stylus contact
YTop conductive sheet after
the stylus contact
Figure 8. 4-wire Touch Screen
When a pressure is applied on the top sheet with a stylus for example, a connection with the lower sheet is made.
The contact point split the Rxtot bottom resistance in the vertical axis into two resistances
R1 and R2. In the same way, the Rytot resistance in the horizontal axis of the top sheet is
divided into two resistances R3 and R4.
Rxtot = R1 + R2
Rytot = R3 + R4
The touchscreen controller imposes a voltage level on X or Y electrodes allowing the
detection of the contact position.
4.2. Coordinates Measurement
During the touch, the top and bottom touchscreen layers
are connected. The resistance between the two sheets
is RT. A current coming from the reference voltage goes
from X+ to X- to perform the X coordinate
measurement. Figure 9 shows the measurement
schematics.
X+
Y+
R1
+
R3
+ ADC
-
Xpos
RT
Vref
-
Since the ADC had a high input impedance, no current
flows through RT and R3. The positive ADC input is
biased with a voltage created by the R1, R2 voltage
divider.
R2
X-
R4
Y-
The conversion with the 12 bit ADC gives the X location.
Figure 9. Abscissa (X) coordinates measurement
R2
Xpos = 4095 ⋅ -------------------R1 + R2
The Y coordinate is measured in a similar fashion with the measurement setup given in Table 7.
R4
Ypos = 4095 ⋅ -------------------R3 + R4
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 12
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
4.3. Pressure Measurement
The 4-wire touchscreen allows pressure measurement. The contact resistance between the two sheets are a function of
the pressure applied on the top sheet. Indeed, the a low pressure applied with the finger will create a small contact area.
With a greater pressure, the contact area will be bigger and the RT resistance smaller.
The RT contact resistance is therefore an indication of the applied pressure. RT is deducted from Z1 and Z2 measurement.
The measurement setup given in Table 7 allows to find Z1 and Z2.
R4
z1 = 4095 ⋅ --------------------------------R1 + R4 + R T
R4 + Rt
z2 = 4095 ⋅ --------------------------------R1 + R4 + R T
Arranging Z1 and Z2 with Rxtot and Rytot allows the
computation of RT.
An alternative calculation method is using Xpos and Ypos.
Ypos
R T = Rytot ⋅ ------------ ⋅
4095
Rytot ⋅ Y pos
R T = ------------------------------- ⋅
4095
z2
----- – 1
z1
4095Xpos
----------– 1 – Rxtot ⋅ 1 – ------------z1
4095
Measurement
Vref +
Vref-
ADC +
X
X+
X-
Y+
Y
Y+
Y-
X+
Z1
X+
Y-
Y+
Z2
X+
Y-
X-
Table 7. Measurement setup
4.4. Pen Detection
The pen detection circuitry is used to detect a user action on the
touchscreen. The contact between the two layers generates an interrupt or
starts an acquisition sequence.
Doing a pen detection prior to conversion avoids feeding the host with
dummy data and saves power.
If the touchscreen is powered between X+ and Y- through a resistor RPNDT,
no current will flow so long as pressure is not applied to the surface (see
Figure 10).
When a pressure is applied, a current path is created and brings X+ to the
level defined by the resistive divider determined by RPNDT and the sum of
R1, RT and R4.
RPNDT
Y+
+
Vref
-
X+
R3
RT
R1
R4
R2
Y-
Sb Q
Rb Q IRQ
X-
Internal
logic
Figure 10. 4-wire pen detection circuitry
RPNDT should be set to the greatest value of 200 kOhm for optimal detection (see Table 16). Increasing PowDly settings
can also improve the detection on panel with high resistance.
The pen detection will set the PENIRQ bit of the RegStat register. The PENIRQ bit will be cleared and the NIRQ will be deasserted as soon as the host reads the status register.
In PENDET mode, the pen detection will set NIRQ low.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 13
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
4.5. Double touch measurement
The simplified model for double touch on the touchscreen is given in Figure 11.
Two fingers on the touchscreen create two contacts between the touchscreen top
and bottom layer. The two contacts have the resistance Rt1 and Rt2.
X+
The two contact points split Rxtot and Rytot on the horizontal and vertical axis. Then
we have R1, R2 and R3 on the top plate and R4, R5 and R6 on the bottom plate.
Y+
R1
Rxtot = R1 + R2 + R3
Rytot = R4 + R5 + R6
R4
Rt1
R2
R5
The determination of theses resistances is a complex task.
The SX8653 allows to measure Rx and Ry which is a combination of theses
resistances. With a S/W running in the host, it is possible to detect the gesture
described in the section Multi-Touch Gestures with 4-wire touchscreen.
Rt2
R3
R6
X-
Y-
Figure 11. Touchscreen model for double touch
To get the best gesture detection, the resistor RmSelX and RmSelY should be set according to the panel resistance and
the Table 8.
Y Panel resistance (Ohm)
RmSelY
X Panel resistance (Ohm)
RmSelX
100 to 187
000
100 to 187
000
188 to 312
001
188 to 312
001
313 to 938
010
313 to 938
010
939 to 1875
011
939 to 1875
011
1876 to 4375
100
1876 to 4375
100
4376 to 9375
101
4376 to 9375
101
9376 to 18780
110
9376 to 18780
110
Larger than 18780
111
Larger than 18780
111
Table 8. RmSelX and RmSelY resistance selection
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 14
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
5. 5-wire Touch Screen Detailed Description
5.1. Touch Screen Operation
As the 4-wire, the 5-wire resistive touch screen consists of two resistive
sheets separated by an insulator (Figure 12). The main difference is that
the 4 wires are connected on the 4 corners of the bottom conductive
sheet. They are referred as Top Left, Top Right, Bottom Left, Bottom
Right.
Top
W ip e
The fifth wire is embedded in the top sheet and is used for sensing the
electrode voltage and is referred as the wiper.
cond
u c ti v
e
e she
t
TR
r
a t io
a r is
L in e a t t e r n
p
TL
n
BR
BL
B
o tt o m
u c ti
cond
ee
ve sh
t
Figure 12. 5-wire touchscreen
5.2. Coordinates Measurement
When the electrodes TL is connected with BL and TR with BR, they form with the linearization pattern 2 electrodes bars
which are very similar to the X electrodes in a 4-wire touchscreen. In the same way, the association of TL with TR and BL
with BR create Y electrodes.
The four corners are therefore able to produce voltage gradients in the horizontal and vertical axis. The wiper is connected
to the high input impedance of the ADC. When a pressure is applied on the top sheet, the contact point split the bottom
sheet resistance into R1 and R2 on the X axis and R3 and R4 on the Y axis.
The X and Y position converted by the 12-bit ADC
gives the following result.
R2
Xpos = 4095 ⋅ -------------------R1 + R2
R4
Ypos = 4095 ⋅ -------------------R3 + R4
5.3. Pen Detection
The BR pin is connected to the positive pin of the reference voltage through
RPNDT. The wiper panel is grounded at the AUX/WIPER pin to provide the
grounding path for a screen touch event.
The BR pin is monitored to detect voltage drop. When a pressure is applied on
the top surface, a current path is created between the two layers and the
PENIRQ bit of the RegStat register will be set. RPNDT should be set to the
greatest value of 200 kOhm for optimal detection (see Table 16). Increasing
PowDly settings can also improve the detection on panel with high resistance.
In PENDET mode, the pen detection will set NIRQ low.
R PNDT
BR
+
Vref
-
Bottom
layer
Sb
R1
Rb
Top
layer
AUX/
WIPER
Q
-
Q
Internal
logic
Figure 13. 5-wire pen detection circuitry
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 15
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
6. Data Processing
The SX8653 offers 4 types of data processing which allows the user to make trade-offs between data throughput, power
consumption and noise rejection. The parameter FILT is used to select the filter order Nfilt as seen in Table 9.
The sn samples from the ADC can be averaged. The processed cn 12-bit value is then send through the SPI bus.
The noise rejection will be improved with a high order to the detriment of the power consumption.
The K coefficient in Table 9 is a filter constant. Its value is K=4079/4095.
FILT
Nfilt
Explanation
0
1
No average
1
3
3 ADC samples are averaged
2
5
5 ADC samples are averaged
3
7
7 ADC samples are sorted and
the 3 center samples are
averaged
Processing
sn = cn
1
s n = --- K ( c n + c n – 1 + c n – 2 )
3
1
s n = --- K ( c n + c n – 1 + c n – 2 + c n – 3 + c n – 4 )
5
c max1 ≥ c max2 ≥ c a ≥ c b ≥ c c ≥ c min1 ≥ c min2
1
s n = --- K ( c a + c b + c c )
3
Table 9. Filter order
7. Power-Up, Reset
During power-up, NIRQ pin is kept low, the POR reset all
registers and states of the SX8653. The SX8653 is not
accessible and SPI communications are ignored.
As soon as NIRQ rises, the SX8653 is in manual mode with
only the SPI peripheral enabled to minimize power
consumption.
The host can reset the SX8653 by setting the NRST pin low or
via the SPI bus. Writing the code 0xDE to the register
RegSoftReset reset the circuit.
When NRST is driven LOW by the host, NIRQ will be driven low
by the SX8653. After the reset NIRQ will be released by the
SX8653.
voltage
VDD
VDD/2
time
voltage
t POR
NIRQ
time
Figure 14. Power-up, NIRQ
8. Modes of Operation
The SX8653 has four operation modes that are configured using the SPI commands as defined in Table 14 and Table 16.
These 4 modes are:
manual (command ‘MANAUTO’ and RATE=0),
automatic (command ‘MANAUTO’ and RATE>0),
pen detect (command ‘PENDET’),
pen trigger mode (command ‘PENTRG’).
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 16
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
In the PENDET mode the pen detection is activated. The SX8653 will generate an interrupt (NIRQ) upon pen detection and
set the PENIRQ bit in the SPI status register. To quit the PENDET mode the host needs to configure the manual mode.
In the PENTRG mode the pen detection is activated and a channel conversion will start after the detection of a pen. The
SX8653 will generate an interrupt (NIRQ) upon pen detection and set the CONVIRQ bit in the SPI status register. To quit
the PENTRIG mode the host needs to configure the manual mode. The PENTRG mode offers the best compromise
between power consumption and coordinate throughput.
8.1. MANual Mode
In manual mode (RATE=0), the host sequences all the actions by the SPI commands described in Table 10.
When a command is received, the SX8653 executes the associated task and waits for the next command.
Command
Action
CONVERT(CHAN)
Select and bias a channel
Wait for the programmed settling time (POWDLY)
Start conversion
Select and bias a channel
SELECT(CHAN)
Table 10.
CONVERT and SELECT command
The channel can be biased for an arbitrary amount of time by first sending a SELECT command and then a CONVERT
command once the settling time requirement is met.
The SELECT command can be omitted if the large range of POWDLY settings cover the requirements. In the latter case,
the CONVERT command alone is enough to perform an acquisition.
With CHAN=SEQ, multiple channels are sampled. This requires programming the POWDLY field in register RegCTRL0.
The selected channel will be powered during POWDLY before a conversion is started. The channel bias is automatically
removed after the conversion has completed.
8.2. AUTOmatic mode
In automatic mode (RATE > 0), SX8653 start the acquisition when a touch is detected. It converts all the channels selected
with RegChnMsk and set NIRQ low when it is finished.
After the host has read the channels, if CONDIRQ=1 and the touch is detected again, the SX8653 starts a new conversion
cycle.
To not loose data, the SX8653 does not begin conversion before the host read all the channels.
We can define the time ts between the start of the conversion and the end of the channels reading by the host.
The rate programmed is achieved if ts<1/RATE otherwise the new rate is 1/ts.
When the control CONDIRQ bit (see register RegStat Table 16) is set to ‘1’ then the interrupts will only be generated if the
pen detect occurred. This result in a regular interrupt stream, as long as the host performs the read channel commands,
and the screen is touched. When the screen is not touched, interrupts does not occur.
If the control CONDIRQ bit is cleared to ‘0’, the interrupts will be always generated. In case there is no pen detected on the
screen then the coordinate data will be qualified as invalid, see section [9.5]. This result in a regular interrupt stream as
long as the host performs the read channel commands,
This working is illustrated in Figure 17.
Figure 15 shows the SPI working in automatic mode with CONDIRQ=1. After the first sentence send through the SPI to
make the initialization, traffic is reduced as only reads are required.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 17
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
The processing time is the
necessary time for the SX8653 to
makes the pen detection, the
settling time (POWDLY) and the
conversion of the selected
channels. This time increases with
the number of channel selected
and the filter used. NIRQ interrupt
signal notifies the host when the
conversions are done.
TOUCH
NIRQ
CS
DIN
DOUT
The host just need to read the
channels data to release the
interrupt.
Read Channel Data CMD
Processing time
Data from SX8652
Time is 1/ RATE
Figure 15. SPI working in AUTO mode
8.3. PENDET Mode
The PENDET mode can be used if the host only needs to know if the screen has been touched or not and take from that
information further actions. When pen detect circuitry is triggered the interrupt signal NIRQ will be generated and the status
register bit ‘PENIRQ’ will be set. The bit is cleared by reading the status register RegStat. The PENDET working is
illustrated in Figure 17.
8.4. PENTRIG Mode
The PENTRIG mode offers the best
compromise between power consumption
and coordinate throughput.
In this mode the SX8653 will wait until a pen
is detected on the screen and then starts the
coordinate conversions. The host will be
signaled only when the screen is touched and
coordinates are available. The flowchart is
describes in Figure 17.
The coordinate rate in pen trigger mode is
determined by the speed of the host reading
the channels and the conversion times of the
channels. The host performs the minimum
number of SPI commands in this mode.
The host has to wait for the NIRQ interrupt to
make the acquisition of the data.
TOUCH
NIRQ
CS
DIN
DOUT
Read Channel Data CMD
Data from SX8652
Conversion time
The SPI working is illustrated in Figure 16.
Figure 16. SPI working in PENTRIG mode
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 18
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
yes
AUTO MODE
PENDET MODE
CONDIRQ=1 ?
Touch Detected ?
PENTRIG MODE
no
no
yes
yes
Touch Detected ?
Touch Detected ?
Set interrupt
NIRQ=0
Start channel conversion
no
RegStat read
yes
Set timer=RATE
Start timer
Start channel conversion
Release Interrupt
NIRQ=1
All conversion
finished
Set interrupt
NIRQ=0
All channel
data read
All conversion
finished
Release Interrupt
NIRQ=1
Set interrupt
NIRQ=0
All channel
data read
Release Interrupt
NIRQ=1
Timer expire
Figure 17. AUTO, PENDET and PENTRIG Mode Flowchart
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 19
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
9. Host Interface
The host interfaced is composed of a SPI bus. It performs the read/ write operations on the registers and channels data.
9.1. SPI Read/Write Registers
The WRITE command allows the host to write a single or multiple registers in the SX8653. The host can read single or
multiple registers from the SX8653 by the READ command. This is defined in Table 11.
W/R command name
CR(7:0)
4
3
Function
7
6
5
WRITE(RA)
0
0
0
RA(4:0)
Write register (see Table 15 for RA)
READ(RA)
0
1
0
RA(4:0)
Read register (see Table 15 for RA)
Table 11.
2
1
0
W/R commands
9.2. SPI Reading Channel Data
Five channels can be sampled by the SX8653: X, Y, Z1, Z2 and AUX. They are defined in Table 13. They can be converted
in sequence with the RegChanMsk register.
The READCHAN command allows the host to read the data obtained after the channels conversion and processing.
W/R command name
READCHAN
7
6
5
CR(7:0)
4
3
2
1
0
0
0
1
x
x
x
x
Table 12.
Channel
x
Function
Read data from channel
Read Channels Data
CHAN(2:0)
2
1
0
Function
X
0
0
0
X channel
Y
0
0
1
Y channel
Z1
0
1
0
First channel for pressure measurement
Z2
0
1
1
Second channel for pressure measurement
AUX
1
0
0
Auxiliary channel
RX
1
0
1
Double touch RX measurement
RY
1
1
0
Double touch RY measurement
SEQ
1
1
1
Channel sequentially selected from RegChanMsk register, (see Table 16)
Table 13. Channel definition
The channel data are 12-bit of unsigned format which corresponds to integers between 0 and 4095. This is send on two
bytes, MSB first then LSB. A mask with the value 0x0FFF (4095) must be done to filter the four first unknown bit.
When a channel data has been transmitted, the next one is sent in the successive order: X,Y, Z1, Z2 and AUX. If a channel
has not been converted, the data is not transmitted.
When the channel data buffer gets empty, the data will carry an invalid data as explained in the channel data format.
Remark: After a conversion sequence, it is possible to read only one time the same channel.
Example: the SX8653 is set to convert X and Y. The value 0xC0 is set in RegChanMsk. The first byte read after the
READCHAN command will be X(MSB), then X(LSB), Y(MSB) and at the end Y(LSB). If the host carry on the reading, it will
get invalid data.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 20
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
9.3. SPI Host Commands
.The host can issue commands to change the operation mode or perform manual actions as defined in Table 14.
command name
7
6
5
CR(7:0)
4
3
SELECT(CHAN)
1
0
0
0
x
CONVERT(CHAN)
1
0
0
1
x
MANAUTO
1
0
1
1
x
Function
2
1
0
CHAN(2:0)
Bias channel (see Table 13 for CHAN)
CHAN(2:0)
x
x
Bias channel (see Table 13 for CHAN)
x
Enter manual or automatic mode.
PENDET
1
1
0
0
x
x
x
x
Enter pen detect mode.
PENTRG
1
1
1
0
x
x
x
x
Enter pen trigger mode.
Table 14.
Host Commands
9.4. SPI implementation and multiple Read/Write
The SPI implemented on the SX8653 is set to the common setting CPOL=0 and CPHA=0 which means data are sampled
on the rising edge of the clock, and shifted on the falling one.
The default state of the clock when NCS gets asserted is low. If a host send a command while the system is busy, the
command is discarded.
The SPI protocol is designed to be able to do multiple read/write during a transaction. During one single operation, as long
as NCS stay asserted, the register address is automatically increased to allow sequential read/write (or sequential retrieval
of data). Between each different operation though (READ/WRITE/READCHAN), the communication should be restarted.
This is described in Figure 18.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 21
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
Writing Register
NCS
Single Write
Multiple Write
SCLK
DIN
RA[4:0]
0 0 0
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
DOUT
Reading Register
NCS
Single Read
Multiple Read
SCLK
DIN
RA[4:0]
0 1 0
DOUT
7 6 5 4 3 2 1 0
Reading Channel Data
NCS
7 6 5 4 3 2 1 0
Single Read
Multiple Read
SCLK
DIN
0 0 1
DOUT
11 10 9 8 7 6 5 4 3 2 1 0
11 10 9 8 7 6 5 4 3 2 1 0
Other command
NCS
SCLK
DIN
Unknown bit
CMD
Single access
DOUT
Multiple access
Figure 18. Data channel format
9.5. Invalid Qualified Data
The SX8653 returns 0xFFFF data in case of invalid qualified data.
This occurs:
When the SX8653 has read all the channel data in the FIFO
When a conversion is done without a pen being detected.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 22
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
9.6. Register Map
Register Address RA(4:0)
Register
Description
0 0000
RegCtrl0
Write, Read
0 0001
RegCtrl1
Write, Read
0 0010
RegCtrl2
Write, Read
0 0011
RegCtrl3
Write, Read
0 0100
RegChanMsk
Write, Read
0 0101
RegStat
Read
1 1111
RegSoftReset
Write
Table 15.
Register address
The details of the registers are described in the next sections.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 23
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
9.7. SX8653 register
Register
Bit Default
Description
Set rate in coordinates per sec (cps) (± 20%)
If RATE =0: Manual mode. if RATE >0: Automatic mode
7:4
0000
RATE
RegCtrl0
0000: Timer disabled -Manual mode
0001: 10 cps
0010: 20 cps
0011: 40 cps
0100: 60 cps
0101: 80 cps
0110: 100 cps
0111: 200 cps
1000: 300 cps
1001: 400 cps
1010: 500 cps
1011: 1k cps
1100: 2k cps
1101: 3k cps
1110: 4k cps
1111: 5k cps
Conversion (or first conversion when filtering is enabled) settling time (± 10%)
3:0
7:6
0000
00
POWDLY
AUXAQC
0000: Immediate (0.5 us)
0001: 1.1 us
0010: 2.2 us
0011: 4.4 us
0100: 8.9 us
0101: 17.8 us
0110: 35.5 us
0111: 71.0 us
1000: 0.14 ms
1001: 0.28 ms
1010: 0.57 ms
1011: 1.14 ms
1100: 2.27 ms
1101: 4.55 ms
1110: 9.09 ms
1111: 18.19 ms
00: AUX is used as an analog input (4wire only)
01: On rising AUX edge, wait POWDLY
and start acquisition
10: On falling AUX edge, wait POWDLY
and start acquisition
11: On rising and falling AUX edges,
wait POWDLY and start acquisition
The AUX trigger works only in manual mode with 4-wire touchscreen
5
1
CONDIRQ
Enable conditional interrupts
0: interrupt always generated at end of
conversion cycle. If no pen is detected
the data is set to ‘invalid qualified’.
4
0
SCREEN
Select the type of screen:
0: 4-wire
1: 5 -wire
10: 50 kOhm
11: 25 kOhm
RegCtrl1
RegCtrl2
1: interrupt generated when pen detect
is successful
3:2
00
RPDNT
Select the Pen Detect Resistor
00: 100 kOhm
01: 200 kOhm
1:0
00
FILT
Digital filter control
00: Disable
01: 3 sample averaging
10: 5 sample averaging
11: 7 sample acquisition, sort, average 3
middle samples
7:4
0
don’t care
Settling time while filtering (± 10%)
0000: Immediate (0.5 us)
0001: 1.1 us
0010: 2.2 us
0011: 4.4 us
0100: 8.9 us
0101: 17.8 us
0110: 35.5 us
0111: 71.0 us
1000: 0.14 ms
1001: 0.28 ms
1010: 0.57 ms
1011: 1.14 ms
1100: 2.27 ms
1101: 4.55 ms
1110: 9.09 ms
1111: 18.19 ms
3:0
0000
SETDLY
Table 16. SX8653 Register
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 24
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
Register
Bit Default
7:6
RegCtrl3
RegChanMsk
0
Description
don’t care
5:3
RmSelY Check Table 8
2:0
RmSelX Check Table 8
7
1
XCONV
0: no sample
1: Sample X channel
6
1
YCONV
0: no sample
1: Sample Y channel
5
0
Z1CONV
0: no sample
1: Sample Z1 channel
4
0
Z2CONV
0: no sample
1: Sample Z2 channel
3
0
AUXCONV
0: no sample
1: Sample AUX channel
0
0
RXCONV
0: no sample
1: Sample RX channel
0
0
RYCONV
0: no sample
1: Sample RY channel
0
0
don’t care
Host writing to this register is ignored.
RegStat
RegSoftReset
7
0
CONVIRQ
0: no IRQ pending
1: Conversion sequence finished
IRQ is cleared by the channel data read command
6
0
PENIRQ
Operational in pen detect mode
0: no IRQ pending
1: Pen detected IRQ pending
IRQ is cleared by the RegStat reading
5
1
RSTEVENT A reset event has occurred
4:0
00000
7:0
0x00
don’t care
Writing 0xDE to this register reset the SX8653
Any other data will not affect the SX8653
Table 16. SX8653 Register
10. Application Information
This section describes in more detail application oriented data.
10.1. Acquisition Setup
Prior to an acquisition, the SX8653 can be setup by writing the control registers. Registers are written by issuing the
register write command. They can be read by issuing the read command. Please refer to the section [9.7].
10.2. Channel Selection
The SX8653 can be setup to start a single channel conversion or to convert several channels in sequence. For a single
conversion, the channel to be converted is determined from the CHAN(2:0) field in the command word (defined in
Table 13).
Several channels defined in RegChanMsk can be acquired sequentially by setting the CHAN(2:0) field to SEQ. The
channels will be sampled in the order X, Y, Z1, Z2, AUX.
10.3. Noise Reduction
A noisy environment can decrease the performance of the controller. For example, an LCD display located just under the
touch screen can adds a lot of noise on the high impedance A/D converter inputs.
10.3.1. POWDLY
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 25
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
In order to perform correct coordinates acquisition properly, some time must be given for the touch screen to reach a
proper level. It is a function of the PCB trace resistance connecting the SX8653 to the touchscreen and also the
capacitance of the touchscreen. We can define tau as the RC time constant. POWDLY duration should be programmed to
10 tau to reach 12 bit accuracy.
Adding a capacitor from the touch screen drivers to ground is a solution to minimize external noise but it increases settling
time and consequently the power consumption.
10.3.2. SETDLY
A best method to filter noise is described in section [6] (Data processing). When filtering is enabled, the channel will be
biased initially during a time of POWDLY for the first conversion. The parameter SETDLY sets the settling time between the
subsequent conversions in a filter set. In most applications, SETDLY can be set to 0. In applications with a high tau and
where accuracy of 1LSB is required SETDLY should be increased.
10.4. AUX Input - 4-wire touchscreen only
The AUX input can be used to sample an analog signal in the range 0-VDD. For system supply by battery, the battery
voltage can be monitored for example. The conversion is done in sequence with the touchscreen acquisition therefore the
sample rate is defined with RegCtrl0 in AUTO mode.
The AUX pin can also triggered conversions. A rising edge, a falling edge or both applied on the AUX pin can trigger the
conversion. This is defined by AUXACQ in RegCtrl1.
This method can be used to sample touchscreen when there is noise-free periods.
10.5. Interrupt Generation
An interrupt (NIRQ=0) will be generated:
During the power-up phase or after a reset
After a touch on the panel being detected in PENDET mode. PENIRQ (bit [6] of RegStat) will be set at the same time.
After completion of a conversion in MANUAL, PENTRIG or AUTO mode. CONVIRQ (bit [7] of RegStat) will be set at the
same time.
The NIRQ will be released and pulled high(NIRQ=1) by the external pull-up resistor:
When the power-up phase is finished
When the host read all channels data that were previously converted by the SX8653 in MANUAL, PENTRIG or AUTO
mode. CONVIRQ will be cleared at the same time.
When the host read the status register in PENDET mode. PENIRQ, will be cleared at the same time.
An active NIRQ (low) needs to be cleared before any new conversions will occur.
10.6. Coordinate Throughput Rate
The coordinate throughput rate depends on the following factors:
The SPI communication time: Tcom
The conversion time: Tconv
1
The coordinate rate is the frequency to get the X, Y, Z1 and Z2 coordinate: CoordRate = ------------------------------T com + T conv
10.6.1. SPI Communication Time
The minimum time to read the channel data in PENTRIG mode is: T com
= ( 8 + 16 × N chan ) × T SPI
The highest throughput will be obtained with a SPI frequency of 5MHz when the host read the channel data as quickly as
possible after the NIRQ falling edge.
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 26
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
10.6.2. Conversion Time
The maximum possible throughput can be estimated with the following equation
T conv = 47 ⋅ T osc + N chan [ POWDLY + SETDLY ( N filt – 1 ) + T osc ( 21N filt + 1 ) ]
with:
Nfilt = {1,3,5,7} based on the order defined for the filter FILT (see Figure 9).
Nchan = {1,2,3,4,5,6,7} based on the number of channels defined in RegChanMsk
POWDLY = 0.5us to 18.19ms, settling time as defined in RegCtrl0
SETDLY = 0.5us to 18.19ms, settling time when filtering as defined in RegCtrl2
Tosc is the oscillator period (555ns +/- 15%)
Table 17 gives some examples of Coordinate Rate and Sample Rate for various setting in PENTRIG mode.
Nch
[1..5 ]
Nfilt
[1 3 5 7]
PowDly
[uS]
SetDly
[uS]
2
1
0.5
-
2
3
71
4
3
140
Tconv
[uS]
Tcomm
[uS]
CoordRate
[kSPS]
51
8
16.7
0.5
190
8
5.0
0.5
740
14
1.3
Table 17. Coordinate throughput examples
10.7. ESD event
In case of ESD event, the chip may reset to protect its internal circuitry. The bit RSTEVENT indicates that a reset event has
occurs.ESD event may trig the pen detection circuitry. In this case wrong data will be send to the host. To detect this false
coordinates on 4-wire touchscreen, Z1 and Z2 can be read. The conditions Z1<LowThreshold and Z2>HighThreshold may
indicate an ESD event. The values LowThreshold and HighThreshold are given for indication only on the table below and
should be fine tune according to the system.
LowThreshold
HighThreshold
10
4070
Table 18. Threshold to detect false coordinates
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 27
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
11. Multi-Touch Gestures with 4-wire touchscreen
11.1. Zoom Gesture
A simple thumb and forefinger “pinch” movement that enables a
user to enlarge objects onscreen (moving fingers away from each
other) or make them smaller (move them towards each other).
This intuitive zooming function replaces the standard point-andclick functionality of a mouse and provides far greater accuracy to
the user.
Figure 19. Zoom gesture
11.2. Rotate Gesture
Rotate objects onscreen by making simple clockwise (right) or
counterclockwise (left) movements with the anchored thumb and
forefinger. This multi-touch function enables swift and accurate
positioning of objects without needing to point and click repeatedly on
a rotate left-right function button in order to achieve the desired effect.
Figure 20. Rotate gesture
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 28
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
12. Packaging Information
12.1. DFN Package
A
B
D
DIMENSIONS
MILLIMETERS
MIN NOM MAX
DIM
PIN1
INDICATOR
(LASER MARK)
A
A1
A2
b
D
D1
E
E1
e
L
N
aaa
bbb
E
A
SEATING
PLANE
aaa C
A1
A2
0.80
0.70 0.00 0.02 0.05
- (0.20) 0.18 0.25 0.30
3.90 4.00 4.10
3.05 3.20 3.30
2.90 3.00 3.10
1.55 1.70 1.80
0.50 BSC
0.30 0.40 0.50
14
0.08
0.10
C
LxN
D1
1 2
E/2
E1
N
bxN
e
bbb
C A B
D/2
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS.
Figure 21. DFN Package Outline Drawing
DIMENSIONS
DIM
C
G
H
K
P
X
Y
Z
MILLIMETERS
(2.90)
2.20
1.70
3.30
0.50
0.30
0.70
3.60
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
3. THERMAL VIAS IN THE LAND PATTERN OF THE EXPOSED PAD
SHALL BE CONNECTED TO A SYSTEM GROUND PLANE.
FAILURE TO DO SO MAY COMPROMISE THE THERMAL AND/OR
FUNCTIONAL PERFORMANCE OF THE DEVICE.
Figure 22. DFN Package Land Pattern
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 29
www.semtech.com
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
12.2. WLCSP Package
B
1.5±0.10
A
INDEX AREA
A1 CORNER
2.0±0.10
0.10 C
0.625 Max.
0.25±0.02
SEATING
PLANE
C
1.00
0.08 C
0.50
D
0.50
C
1.50
B
0.25
A
1
2
3
12X Ø0.315±0.03
0.05
C A B
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS
Figure 23. WLCSP Package Outline Drawing
1.00
0.50
0.50
0.25
1.50
12X Ø0.25
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS
2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
Figure 24. WLCSP Land Pattern of WLCSP
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 30
www.semtech.com
SX8653
DATASHEET
ADVANCED COMMUNICATIONS & SENSING
© S e m te c h 2 0 1 0
A ll rig h ts re s e rv e d . R e p ro d u c tio n in w h o le o r in p a rt is p ro h ib ite d w ith o u t th e p rio r w ritte n c o n s e n t o f th e c o p y rig h t o w n e r. T h e
in fo rm a tio n p re s e n te d in th is d o c u m e n t d o e s n o t fo rm p a rt o f a n y q u o ta tio n o r c o n tra c t, is b e lie v e d to b e a c c u ra te a n d re lia b le
a n d m a y b e c h a n g e d w ith o u t n o tic e . N o lia b ility w ill b e a c c e p te d b y th e p u b lis h e r fo r a n y c o n s e q u e n c e o f its u s e . P u b lic a tio n
th e re o f d o e s n o t c o n v e y n o r im p ly a n y lic e n s e u n d e r p a te n t o r o th e r in d u s tria l o r in te lle c tu a l p ro p e rty rig h ts . S e m te c h a s s u m e s
n o re s p o n s ib ility o r lia b ility w h a ts o e v e r fo r a n y fa ilu re o r u n e x p e c te d o p e ra tio n re s u ltin g fro m m is u s e , n e g le c t im p ro p e r
in s ta lla tio n , re p a ir o r im p ro p e r h a n d lin g o r u n u s u a l p h y s ic a l o r e le c tric a l s tre s s in c lu d in g , b u t n o t lim ite d to , e x p o s u re to
p a ra m e te rs b e y o n d th e s p e c ifie d m a x im u m ra tin g s o r o p e ra tio n o u ts id e th e s p e c ifie d ra n g e .
S E M T E C H P R O D U C T S A R E N O T D E S IG N E D , IN T E N D E D , A U T H O R IZ E D O R W A R R A N T E D T O B E S U IT A B L E F O R U S E IN
L IF E -S U P P O R T A P P L IC A T IO N S , D E V IC E S O R S Y S T E M S O R O T H E R C R IT IC A L A P P L IC A T IO N S . IN C L U S IO N O F
S E M T E C H P R O D U C T S IN S U C H A P P L IC A T IO N S IS U N D E R S T O O D T O B E U N D E R T A K E N S O L E L Y A T T H E C U S T O M E R ’S
O W N R IS K . S h o u ld a c u s to m e r p u rc h a s e o r u s e S e m te c h p ro d u c ts fo r a n y s u c h u n a u th o riz e d a p p lic a tio n , th e c u s to m e r s h a ll
in d e m n ify a n d h o ld S e m te c h a n d its o ffic e rs , e m p lo y e e s , s u b s id ia rie s , a ffilia te s , a n d d is trib u to rs h a rm le s s a g a in s t a ll c la im s ,
c o s ts d a m a g e s a n d a tto rn e y fe e s w h ic h c o u ld a ris e .
A ll re fe re n c e d b ra n d s , p ro d u c t n a m e s , s e rv ic e n a m e s a n d tra d e m a rk s a re th e p ro p e rty o f th e ir re s p e c tiv e o w n e rs .
Contact information
Semtech Corporation Advanced Communications & Sensing Products
E-mail: [email protected]@semtech.comInternet: http://www.semtech.com
USA
200 Flynn Road, Camarillo, CA 93012-8790.
Tel: +1 805 498 2111 Fax: +1 805 498 3804
FAR EAST
12F, No. 89 Sec. 5, Nanking E. Road, Taipei, 105, TWN, R.O.C.
Tel: +886 2 2748 3380 Fax: +886 2 2748 3390
EUROPE
Semtech Ltd., Units 2 & 3, Park Court, Premier Way, Abbey Park Industrial Estate, Romsey, Hampshire, SO51 9DN.
Tel: +44 (0)1794 527 600 Fax: +44 (0)1794 527 601
ISO9001
CERTIFIED
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 31
www.semtech.com