Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Sxx10xSx & Sxx10x Series
®
Description
Excellent unidirectional switches for phase control and
general switching applications such as heating and motor
speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
t3P)4DPNQMJBOU
t(MBTToQBTTJWBUFE
junctions
Agency Approval
Agency
t7PMUBHFDBQBCJMJUZVQ
to 1000 V
t4VSHFDBQBCJMJUZVQ
to 100 A
Agency File Number
Applications
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Main Features
Symbol
IT(RMS)
VDRM /VRRM
I(5
Value
Unit
10
A
400 to 1000
V
0.2 to 15
mA
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
G
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
241
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series
10A SCRs
TO-220L Package : E71639
®
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
IT(RMS)
IT(AV)
ITSM
Sxx10RSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Sxx10LSy
TC = 80°C
Average on-state current
Sxx10RSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Value
Unit
10
A
6.4
A
83
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
100
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate of rise of on-state current
G)[5J = 110°C
100
A/μs
Peak gate current
TJ = 110°C
1
A
Average gate power dissipation
TJ = 110°C
A
0.1
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
Value
Unit
10
A
6.4
A
Tstg
TJ
RMS on-state current
Peak non-repetitive surge current
I(.
P("7
TC = 80°C
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
I2t
di/dt
Test Conditions
Sxx10LSy
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
Parameter
RMS on-state current
IT(AV)
Average on-state current
ITSM
Peak non-repetitive surge current
I2t
di/dt
I(.
P("7
Tstg
TJ
Test Conditions
Sxx10L
TC = 95°C
Sxx10R
Sxx10D
Sxx10V
TC = 105°C
Sxx10L
TC = 95°C
Sxx10R
Sxx10D
TC = 105°C
Sxx10V
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
83
A
100
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate-of-rise of on-state current
G)[5J = 125°C
100
A/μs
Peak gate current
TJ = 125°C
2
A
Average gate power dissipation
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
Sxx10xSx & Sxx10x Series
242
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
I(5
V(5
Value
Test Conditions
Sxx10xS2
MAX.
VD = 6V RL = 100 8
Sxx10xS3
200
MAX.
500
Unit
μA
0.8
V
dv/dt
VD = VDRM; R(, = 1k8 ; TJ = 110°C
TYP.
8
V/μs
V(%
VD = VDRM; RL = 3.3 k8; TJ = 110°C
MIN.
0.2
V
V(3.
I(3 = 10μA
MIN.
6
I)
IT = 20mA (initial)
MAX.
6
8
mA
tq
(1)
MAX.
50
45
μs
tgt
I( = 2 x I(5; PW = 15μs; IT = 12A
TYP.
4
5
μs
V
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
I(5
V(5
Value
Test Conditions
Sxx10x
MAX.
VD = 12V RL = 60 8
MAX.
VD = VDRM; gate open; TJ = 100°C
dv/dt
mA
1.5
V
350
600V
300
1000V
250
MIN.
400V
VD = VDRM; gate open; TJ = 125°C
15
400V
800V
Unit
100
V/μs
250
600V
225
800V
200
V(%
VD = VDRM; RL = 3.3 k8; TJ = 125°C
MIN.
0.2
V
I)
IT = 200mA (initial)
MAX.
30
mA
tq
(1)
MAX.
35
μs
tgt
I( = 2 x I(5; PW = 15μs; IT = 20A
TYP.
2
μs
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs
Static Characteristics
Symbol
Test Conditions
VTM
IT = 20A; tp = 380 μs
Sxx10xyy
IDRM / IRRM
MAX.
Unit
1.6
V
TJ = 25°C
400 - 600V
5
TJ = 110°C
400 - 600V
250
400 - 800V
10
TJ = 25°C
VDRM / VRRM
Value
1000V
Sxx10x
TJ = 100°C
TJ = 125°C
MAX.
20
μA
400 - 800V
200
1000V
3000
400 - 800V
500
Note: xx = voltage, x = package, yy = sensitivity
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
243
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series
10A SCRs
Symbol
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Thermal Resistances
Symbol
Parameter
Value
Sxx10RSy
1.6
Sxx10LSy
3.0
Sxx10VSy
1.7
Sxx10DSy
1.45
Sxx10R
1.6
Sxx10L
3.0
Sxx10V
1.7
Sxx10D
1.45
Sxx10RSy
40
Sxx10LSy
65
Sxx10VSy
85
Sxx10R
40
Sxx10L
50
Sxx10V
70
Unit
Junction to case (AC)
RR(J-C)
°C/W
Junction to ambient
RR(J-A)
°C/W
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: Normalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
0.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (°C)
Sxx10xSx & Sxx10x Series
-40
-15
10
35
60
85
110
125
Junction Temperature (TJ) -- (°C)
244
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: Normalized DC Holding Current
vs. Junction Temperature
2.0
Ratio of IH / IH (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
2.0
1.5
1.0
0.5
1.5
1.0
0.5
0.0
0.0
-40
-15
10
35
60
85
110
-40
125
-15
10
Junction Temperature (TJ) -- (°C)
Figure 5: On-State Current vs. On-State
Voltage (Typical)
85
110
125
10
TJ = 25ºC
28
24
20
16
12
8
4
8
7
6
5
4
3
2
1
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
10A SCRs
9
Average On-State Power Dissipation
[PD(AV)] -- (Watts)
Instantaneous On-state Current
(iT) – Amps
60
Figure 6: Power Dissipation (Typical) vs. RMS
On-State Current
32
0
1.6
0
1
2
Instantaneous On-state Voltage (vT) – Volts
3
4
5
6
7
8
9
10
RMS On-State Current [IT(RMS)] -- (Amps)
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 8: Maximum Allowable Case Temperature
vs. Average On-State Current
130
130
125
125
120
Sxx10L
115
120
Sxx10R
Sxx10D
Sxx10V
Maximum Allowable Case
Temperature (TC) - °C
Maximum Allowable Case
Temperature (TC) - °C
35
Junction Temperature (TJ) -- (°C)
110
105
Sxx10RSy
Sxx10DSy
Sxx10VSy
100
95
90
Sxx10LSy
85
115
75
Sxx10R
Sxx10D
Sxx10V
5
6
110
105
100
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
Sxx10L
Sxx10RSy
Sxx10DSy
Sxx10VSy
95
90
Sxx10LSy
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
75
70
70
0
1
2
3
4
5
6
7
8
9
10
11
0
RMS On-State Current [IT(RMS)] - Amps
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1
2
3
4
7
Average On-State Current [IT(AVE)] - Amps
245
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
100
Maximum Allowable Ambient
Temperature (TA) - °C
Maximum Allowable Case Temperature
(TC) - °C
120
Sxx10L
80
Sxx10V
Sxx10RSy
Sxx10LSy
60
40
Sxx10VSy
20
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
100
Sxx10L
80
Sxx10RSy
Sxx10LSy
60
Sxx10V
40
Sxx10VSy
20
0
0
0.0
0.5
1.0
1.5
2.0
0.0
2.5
0.5
Average On-State Current [IT(AVE)] - Amps
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: Peak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
1000
100
ITRM
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
0.0
10
0.5
1.0
10.0
0
50.0
Pulse Current Duration (tW) - ms
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 13: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
4611-:'3&26&/$:)[4JOVTPJEBM
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
(BUFDPOUSPMNBZCFMPTUEVSJOHBOEJNNFEJBUFMZ
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
Sxx10xSx & Sxx10x Series
246
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Soldering Parameters
1Co'SFFBTTFNCMZ
Pre Heat
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
oTFDPOET
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
tS
25
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
time to peak temperature
Physical Specifications
Test
100% Matte Tin-plated
Body Material
6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ
classification 94V-0
AC Blocking
Temperature Cycling
Copper Alloy
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Time
Environmental Specifications
Terminal Finish
Lead Material
Ramp-do
Ramp-down
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
3)
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
247
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series
10A SCRs
- Temperature Min (Ts(min))
tP
TP
Temperature
Reflow Condition
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
X
0.2mA
Sensitive SCR
TO-220R
400V
600V
X
Sxx10RS2
800V
1000V
Sxx10LS2
X
X
0.2mA
Sensitive SCR
TO-220L
Sxx10VS2
X
X
0.2mA
Sensitive SCR
TO-251
Sxx10DS2
X
X
0.2mA
Sensitive SCR
TO-252
Sxx10RS3
X
X
0.5mA
Sensitive SCR
TO-220R
Sxx10LS3
X
X
0.5mA
Sensitive SCR
TO-220L
Sxx10VS3
X
X
0.5mA
Sensitive SCR
TO-251
Sxx10DS3
X
X
0.5mA
Sensitive SCR
TO-252
Sxx10R
X
X
X
X
15mA
Standard SCR
TO-220R
Sxx10L
X
X
X
X
15mA
Standard SCR
TO-220L
Sxx10V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx10D
X
X
X
X
15mA
Standard SCR
TO-252
Note: xx = Voltage
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
AREA: 0.040 IN2
Dimension
Anode
E
H
D
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
Anode
GATE
F
L
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.040
0.044
0.050
1.02
1.11
1.27
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
(
0.087
0.090
0.093
2.21
2.28
2.36
)
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
,
0.038
0.040
0.044
0.97
1.01
1.12
L
0.018
0.020
0.023
0.46
0.52
0.58
G
I
Sxx10xSx & Sxx10x Series
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
248
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
6.71
.264
B
C
P
Q
Cathode
GATE
F
Anode
1.60
.063
1.80
.071
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.040
0.043
0.050
1.02
1.09
1.27
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
A
5.34
.210
Inches
AREA : 0.040 IN2
3
.118
G
4.60
.181
I
O
L
K
J
H
M
0.027
0.031
0.033
0.69
0.80
0.84
0.087
0.090
0.093
2.21
2.28
2.36
)
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
,
0.038
0.040
0.044
0.97
1.02
1.12
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
10A SCRs
N
F
(
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
249
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
AREA (REF.) 0.17 IN2
TC MEASURING POINT
O
A
E
Dimension
8.13
.320
P
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
N
K
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
(
0.540
0.575
13.72
14.61
)
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
,
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
AREA (REF.) 0.17 IN2
TC MEASURING POINT
O
A
E
P
Dimension
8.13
.320
B
C
13.36
.526
D
7.01
.276
F
Inches
Millimeters
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
(
0.540
0.575
13.72
14.61
)
0.025
0.035
0.64
0.89
R
G
L
H
CATHODE
ANODE GATE
K
J
Sxx10xSx & Sxx10x Series
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
0.195
0.205
4.95
5.21
,
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
250
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx10L/Ryy
Sxx10L/Ryy
2.2 g
Bulk
500
Sxx10L/RyyTP
Sxx10L/Ryy
2.2 g
Tube
500 (50 per tube)
Sxx10DyyTP
Sxx10Dyy
0.3 g
Tube
750 (75 per tube)
Sxx10DyyRP
Sxx10Dyy
0.3 g
Embossed Carrier
2500
Sxx10VyyTP
Sxx10Vyy
0.4 g
Tube
750 (75 per tube)
Sxx10L/R
Sxx10L/R
2.2 g
Bulk
500
Sxx10L/RTP
Sxx10L/R
2.2 g
Tube
500 (50 per tube)
Sxx10DTP
Sxx10D
0.3 g
Tube
750 (75 per tube)
Sxx10DRP
Sxx10D
0.3 g
Embossed Carrier
2500
Sxx10VTP
Sxx10V
0.4 g
Tube
750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
TO-252 Embossed Carrier Reel Pack (RP) Specifications
0.315
(8.0)
Cathode
XXXXXX
DC
DC
XX
0.059
Dia
(1.5)
10A SCRs
* Cover tape
XXXXXX
*
DC
0.524
(13.3)
XX
0.63
(16.0)
XXXXXX
Gate
XX
0.157
(4.0)
XXXXXX
Meets all EIA-481-2 Standards
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
Part Marking System
S 60 10 L S2 56
DEVICE TYPE
S : SCR
TO-220AB - (R & L Packages)
TO-251AA – (V Package)
TO-252AA – (D Package )
®
CURRENT
10: 10A
Sxx10L
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200μA
S3: 500μA
Standard SCR:
(blank): 15mA
®
yxxxx
yxxxx
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
Sxx10DS3
LEAD FORM DIMENSIONS
xx : Lead Form Option
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (VPAK)
D : TO-252 (DPAK)
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
251
Revised: July 29, 2010 09:54 AM
Sxx10xSx & Sxx10x Series