Micrel, Inc. Precision Edge® SY10ELT21L Precision Edge® SY100ELT21L 3.3V DIFFERENTIAL LVPECL-to-LVTTL TRANSLATOR SY10ELT21L SY100ELT21L FEATURES ■ ■ ■ ■ ■ ■ ■ 3.3V power supply 2.0ns typical propagation delay Low power Differential LVPECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC package Precision Edge® DESCRIPTION The SY10/100ELT21L are single differential LVPECLto-LVTTL translators using a single +3.3V power supply. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8-lead SOIC package and low skew single gate design make the ELT21L ideal for applications that require the translation of a clock or data signal where minimal space, low power, and low cost are critical. VBB allows a differential, single-ended, or AC-coupled interface to the device. If used, the VBB output should be bypassed to VCC with 0.01µF capacitor. Under open input conditions, the /D will be biased at a VCC/2 voltage level and the D input will be pulled to ground. This condition will force the Q output low to provide added stability. The ELT21L is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN NAMES Pin Function Q TTL Output D, /D Differential LVPECL Inputs VCC +3.3V Supply VBB Reference Output GND Ground Precision Edge is a registered trademark of Micrel, Inc. M9999-031506 [email protected] or (408) 955-1690 Rev.: D 1 Amendment: /0 Issue Date: March 2006 Precision Edge® SY10ELT21L SY100ELT21L Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) NC 1 TTL D 2 Package Type Operating Range Package Marking Lead Finish SY10ELT21LZC Z8-1 Commercial HEL21L Sn-Pb 6 NC SY10ELT21LZCTR(2) Z8-1 Commercial HEL21L Sn-Pb 5 GND SY100ELT21LZC Z8-1 Commercial XEL21L Sn-Pb SY100ELT21LZCTR(2) Z8-1 Commercial XEL21L Sn-Pb SY10ELT21LZI Z8-1 Industrial HEL21L Sn-Pb SY10ELT21LZITR(2) Z8-1 Industrial HEL21L Sn-Pb SY100ELT21LZI Z8-1 Industrial XEL21L Sn-Pb SY100ELT21LZITR(2) Z8-1 Industrial XEL21L Sn-Pb SY10ELT21LZG(3) Z8-1 Industrial HEL21L with Pb-Free bar-line indicator Pb-Free NiPdAu SY10ELT21LZGTR(2, 3) Z8-1 Industrial HEL21L with Pb-Free bar-line indicator Pb-Free NiPdAu SY100ELT21LZG(3) Z8-1 Industrial XEL21L with Pb-Free bar-line indicator Pb-Free NiPdAu SY100ELT21LZG(TR(2, 3) Z8-1 Industrial XEL21L with Pb-Free bar-line indicator Pb-Free NiPdAu 8 VCC Part Number 7 Q PECL D 3 VBB 4 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031506 [email protected] or (408) 955-1690 2 Precision Edge® SY10ELT21L SY100ELT21L Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Paramter TRUTH TABLE Value Unit D /D Q –0.5 to +3.8 V L H L 0V to VCC+0.5 V H L H Open Open L VCC Power Supply Voltage VI PECL Input Voltage VO Voltage Applied to Output at HIGH State –0.5 to VCC V IO Current Applied to Output at LOW State Twice the Rated IOL mA TLEAD Lead Temperature (soldering, 20sec.) +260 °C Tstore Storage Temperature –65 to +150 °C TA Operating Temperature –40 to +85 °C NOTE: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. TTL DC ELECTRICAL CHARACTERISTICS VCC = +3.3V ±5% TA = –40°C Symbol TA = 0°C TA = +25°C TA = +85°C Parameter Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit Condition IOS Output Short Circuit Current –80 –275 –80 –275 –80 — –275 –80 –275 mA ICC Power Supply Current — 20 — 20 — 14 20 — 20 mA VOH Output HIGH Voltage 2.0 — 2.0 — 2.0 — — 2.0 — V IOH = –3.0mA VOL Output LOW Voltage — 0.5 — 0.5 — — 0.5 — 0.5 V IOL = 24mA VOUT = 0V PECL DC ELECTRICAL CHARACTERISTICS VCC = +3.3V ±5% TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit — 150 — 150 — — 150 — 150 µA 0.5 –300 — — 0.5 –300 — — 0.5 –300 — — — — 0.5 –300 — — µA IIH Input HIGH Current IIL Input LOW Current VIH Input HIGH Voltage(2) 10ELT 100ELT 2070 2410 2135 2420 2130 2135 2460 2420 2170 2135 — — 2490 2420 2240 2580 2135 2420 mV VIL Input LOW Voltage(2) 10ELT 100ELT 1350 1800 1490 1825 1350 1490 1820 1825 1350 1490 — — 1820 1825 1350 1855 1490 1825 mV VBB Reference Output(2) 10ELT 100ELT 1870 2000 1920 2040 1920 1920 2030 2040 1950 1920 2000 1980 2050 2040 1990 2110 1920 2040 mV D /D NOTES: 1. These values are for VCC = 3.3V. Level Specifications will vary 1:1 VCC. M9999-031506 [email protected] or (408) 955-1690 3 Condition Precision Edge® SY10ELT21L SY100ELT21L Micrel, Inc. AC ELECTRICAL CHARACTERISTICS VCC = +3.3V ±5% TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit Condition tPLH tPHL Propagation Delay 1.5 2.5 1.5 2.5 1.5 2.0 2.5 1.5 2.5 ns CL = 20pF tskpp Part-to-Part Skew(1,2) — 0.5 — 0.5 — — 0.5 — 0.5 ns CL = 20pF CL = 20pF Frequency(2,3,4) fMAX Maximum Input 275 — 275 — 275 — — 275 — MHz VCMR Common Mode Range 1.2 VCC 1.2 VCC 1.2 — VCC 1.2 VCC V VPP Minimum Peak-to-Peak Input(5) 100 — 100 — 100 — — 100 — mV tr tf Output Rise/Fall Time (1.0V to 2.0V) 0.5 1.0 0.5 1.0 0.5 — 1.0 0.5 1.0 ns NOTES: 1. Part-to-Part Skew considering HIGH-to-HIGH transitions at common VCC level. 2. These parameters are guaranteed but not tested. 3. Frequency at which output levels will meet a 0.8V to 2.0V minimum swing. 4. The fMAX value is specified as the minimum guaranteed maximum frequency. Actual operational maximum frequency may be greater. 5. 100mV input guarantees full logic at output. M9999-031506 [email protected] or (408) 955-1690 4 CL = 20pF Precision Edge® SY10ELT21L SY100ELT21L Micrel, Inc. 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-031506 [email protected] or (408) 955-1690 5