ECL Pro™ Micrel, Inc. ECLSY10EP01V Pro™ SY10EP01V 5V/3.3V 4-INPUT OR/NOR FEATURES ■ ■ ■ ■ ■ ■ 3.3V and 5V power supply options 230ps typical propagation delay High bandwidth to 3GHz 75kΩ internal input pulldown resistors Q output will default LOW with inputs open Available in 8-pin MSOP and SOIC packages ECL Pro™ DESCRIPTION The SY10EP01V is a 4-input OR/NOR gate. The device is functionally equivalent to the EL01 device, E101 (a quad version). The SY10EP01V is ideal for applications requiring the fastest AC performance available. PIN NAMES Pin Function D0–D3 ECL Data Inputs Q, /Q ECL Data Outputs TRUTH TABLE D0 D1 D2 D3 Q /Q L L L L L H H X X X H L X H X X H L X X H X H L X X X H H L H H H H H L ECL Pro is a trademark of Micrel, Inc. M9999-111605 [email protected] or (408) 955-1690 Rev.: D 1 Amendment: /0 Issue Date: November 2005 ECL Pro™ SY10EP01V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) D0 1 8 VCC D1 2 7 Q D2 3 6 /Q D3 4 5 VEE Available in 8-Pin SOIC and MSOP Packages Part Number SY10EP01VZC Package Type Operating Range Package Marking Lead Finish Z8-1 Commercial HEP01 Sn-Pb SY10EP01VZCTR(2) Z8-1 Commercial HEP01 Sn-Pb SY10EP01VKC K8-1 Commercial HP01 Sn-Pb SY10EP01VKCTR(2) K8-1 Commercial HP01 Sn-Pb SY10EP01VZI Z8-1 Industrial HEP01 Sn-Pb SY10EP01VZITR(2) Z8-1 Industrial HEP01 Sn-Pb SY10EP01VKI(2) K8-1 Industrial HP01 Sn-Pb SY10EP01VKITR(2) K8-1 Industrial HP01 Sn-Pb SY10EP01VZG(3) Z8-1 Industrial HEP01 with NiPdAu Pb-Free bar-line indicator Pb-Free SY10EP01VZGTR(2, 3) Z8-1 Industrial HEP01 with NiPdAu Pb-Free bar-line indicator Pb-Free SY10EP01VKG(3) K8-1 Industrial HP01 with NiPdAu Pb-Free bar-line indicator Pb-Free SY10EP01VKGTR(2, 3) K8-1 Industrial HP01 with NiPdAu Pb-Free bar-line indicator Pb-Free Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-111605 [email protected] or (408) 955-1690 2 ECL Pro™ SY10EP01V Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) –6.0 to 0 V VEE Power Supply Voltage (VCC = 0) +6.0 to 0 V VI Input Voltage (VCC = 0V) –6.0 to 0 V Input Voltage (VEE = 0V) +6.0 to 0 V 50 100 mA mA –40 to +85 °C +260 °C –65 to +150 °C IOUT Output Current TA Operating Temperature Range TLEAD Lead Temperature (Solderng, 20sec.) Tstore Storage Temperature Range Note 1. –Continuous –Surge Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = –5.5V to –3.0V; VCC = 3.0V to 5.5V, VEE = 0V(2) TA = –40°C Symbol IEE VOH Parameter Power Supply Output HIGH Current(3) Voltage(4) Voltage(4) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 31 — 20 31 — — 31 mA –1135 — –0885 –1070 –0945 –0820 –1010 — –0760 mV –1935 — –1685 –1870 –1745 –1630 –1810 — –1560 mV — –0885 –1145 — –0820 –1085 — –0760 mV VOL Outuput LOW VIH Input HIGH Voltage –1210 VIL Input LOW Voltage –1935 — –1610 –1870 — –1545 –1810 — –1485 mV IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 — — 0.5 — — 0.5 — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(min) to VEE(max), all other pins floating. Note 4. All loading with 50Ω to VCC – 2.0V. M9999-111605 [email protected] or (408) 955-1690 3 ECL Pro™ SY10EP01V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS VCC = 0V, VEE = –3.0V to –5.5V; VCC = 3.0V to 5.5V, VEE = 0V TA = –40°C Symbol Parameter Frequency(1) fMAX Maximum Toggle tPD Propagation Delay to Output Differential D ➝ Q, /Q tSKEW Device Skew(2) tr tf Output Rise/Fall Times (20% to 80%) Q TA = +25°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — — — 3 — — — — GHz 100 — 300 150 200 250 200 — 300 — — — — 5 20 — — 20 ps 60 — 180 60 110 180 70 — 180 ps ps Note 1. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. Note 2. Skew difference between all inputs to output. Parameter not tested. M9999-111605 [email protected] or (408) 955-1690 TA = +85°C 4 ECL Pro™ SY10EP01V Micrel, Inc. 8-PIN MSOP (K8-1) Rev. 01 M9999-111605 [email protected] or (408) 955-1690 5 ECL Pro™ SY10EP01V Micrel, Inc. 8-PIN PLASTIC SOIC (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2005 Micrel, Incorporated. M9999-111605 [email protected] or (408) 955-1690 6