TA31142FNG TA31142FG/FNG TA31142FG,TA31142FNG TA31142FNG TA31142FG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FNG TA31142FG/FNG 2005-04-07 2006-12-20 TA31142FNG TA31142FG/FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 2005-04-07 2006-12-20 TA31142FG/FNG TA31142FNG 12 2005-04-07 2006-12-20 TA31142FNG About solderability, following conditions were confirmed x Solderability (1) Use of Sn-37Pb solder Bath ・ solder bath temperature = 230℃ ・ dipping time = 5seconds ・ the number of times = once ・ use of R-type flux (2) Use of Sn-3.0Ag-0.5Cu solder Bath ・ solder bath temperature = 245℃ ・ dipping time = 5seconds ・ the number of times = once ・ use of R-type flux RESTRICTIONS ON PRODUCT USE x The information contained herein is subject to change without notice. x The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. x TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. x The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. x The products described in this document are subject to the foreign exchange and foreign trade laws. x Please use this products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurrng as a result of noncompliance with applicable laws and regulations. x TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any laws and regulations. 13 2006-12-20