TA7805,057,06,07,08,09,10,12,15,18,20,24SB TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7805SB, TA78057SB, TA7806SB, TA7807SB, TA7808SB, TA7809SB, TA7810SB, TA7812SB, TA7815SB, TA7818SB, TA7820SB, TA7824SB Three-Terminal Positive Voltage Regulators 5 V, 5.7 V, 6 V, 7 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V Features z Suitable for CMOS, TTL, the power supply of other digital ICs z Internal thermal overload protection z Internal short circuit current limiting z Maximum output current of 1 A z Package in the plastic case TPL (PD: 1.8 W) Pin Assignment Marking side 1 3 2 IN GND OUT SIP3-P-2.50A Weight: 1.5 g (Typ.) Marking Lot No. 78**SB A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code) Note 1: The “* * ” in the each product number is replaces with the output voltage of each product. 1 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB Equivalent Circuit Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit TA7805SB TA78057SB TA7806SB TA7807SB 35 TA7808SB Input voltage TA7809SB TA7810SB VIN V TA7812SB TA7815SB TA7818SB 40 TA7820SB TA7824SB Power dissipation PD 1.8 W Operating temperature Topr −30~85 °C Storage temperature Tstg −55~150 °C Junction temperature Tj 150 °C Rth (j-a) 69.4 °C/W Thermal resistance (Ta = 25°C) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7805SB Electrical Characteristics (Unless otherwise specified, VIN = 10 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 4.8 5.0 5.2 V Reg·line 1 Tj = 25°C 7.0 V ≤ VIN ≤ 25 V ― 3 100 8.0 V ≤ VIN ≤ 12 V ― 1 50 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 15 100 250 mA ≤ IOUT ≤ 750 mA ― 5 50 Output voltage VOUT 1 Tj = 25°C 4.75 ― 5.25 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.2 8.0 mA Quiescent current change ΔIB 1 7.0 V ≤ VIN ≤ 25 V, IOUT = 5 mA, Tj = 25°C ― ― 1.3 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 50 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 8.0 V ≤ VIN ≤ 18 V IOUT = 50 mA, Tj = 25°C 62 78 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.6 ― A TCVO 1 IOUT = 5 mA ― −0.6 ― mV/°C Quiescent current Average temperature coefficient of output voltage 7.0 V ≤ VIN ≤ 20 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV TA78057SB Electrical Characteristics (Unless otherwise specified, VIN = 10.7 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 5.47 5.7 5.93 V Reg·line 1 Tj = 25°C 7.7 V ≤ VIN ≤ 25 V ― 4 110 8.7 V ≤ VIN ≤ 12.7 V ― 2 55 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 15 110 250 mA ≤ IOUT ≤ 750 mA ― 5 55 Output voltage VOUT 1 Tj = 25°C 5.42 ― 5.98 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA Quiescent current change ΔIB 1 7.7 V ≤ VIN ≤ 25 V, IOUT = 5 mA, Tj = 25°C ― ― 1.3 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 55 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 8.8 V ≤ VIN ≤ 18.8 V, IOUT = 50 mA, Tj = 25°C 62 77 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.5 ― A TCVO 1 IOUT = 5 mA ― −0.7 ― mV/°C Quiescent current Average temperature coefficient of output voltage 3 7.7 V ≤ VIN ≤ 20.7 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7806SB Electrical Characteristics (Unless otherwise specified, VIN = 11 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 5.75 6.0 6.25 V Reg·line 1 Tj = 25°C 8.0 V ≤ VIN ≤ 25 V ― 4 120 9 V ≤ VIN ≤ 13 V ― 2 60 Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Quiescent current change ΔIB Output noise voltage mV 5 mA ≤ IOUT ≤ 1.4 A ― 15 120 250 mA ≤ IOUT ≤ 750 mA ― 5 60 8 V ≤ VIN ≤ 21 V 5.0 mA ≤ IOUT ≤ 1.0 A 5.7 ― 6.3 V Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA 1 8.0 V ≤ VIN ≤ 25 V, IOUT = 5 mA, Tj = 25°C ― ― 1.3 mA VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 55 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 9 V ≤ VIN ≤ 19 V IOUT = 50 mA, Tj = 25°C 61 77 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.5 ― A TCVO 1 IOUT = 5 mA ― −0.7 ― mV/°C Quiescent current Average temperature coefficient of output voltage mV TA7807SB Electrical Characteristics (Unless otherwise specified, VIN = 12 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 6.72 7.0 7.28 V Reg·line 1 Tj = 25°C 9 V ≤ VIN ≤ 25 V ― 5 140 10 V ≤ VIN ≤ 14 V ― 2 70 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 15 140 250 mA ≤ IOUT ≤ 750 mA ― 5 70 Output voltage VOUT 1 Tj = 25°C 6.65 ― 7.35 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA Quiescent current change ΔIB 1 9 V ≤ VIN ≤ 25 V, IOUT = 5 mA, Tj = 25°C ― ― 1.3 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 60 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 10 V ≤ VIN ≤ 20 V IOUT = 50 mA, Tj = 25°C 59 75 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.3 ― A TCVO 1 IOUT = 5 mA ― −0.8 ― mV/°C Quiescent current Average temperature coefficient of output voltage 4 9 V ≤ VIN ≤ 22 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7808SB Electrical Characteristics (Unless otherwise specified, VIN = 14 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 7.7 8.0 8.3 V Reg·line 1 Tj = 25°C 10.5 V ≤ VIN ≤ 25 V ― 6 160 11 V ≤ VIN ≤ 17 V ― 2 80 Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Quiescent current change ΔIB Output noise voltage mV 5 mA ≤ IOUT ≤ 1.4 A ― 12 160 250 mA ≤ IOUT ≤ 750 mA ― 4 80 10.5 V ≤ VIN ≤ 23 V 5.0 mA ≤ IOUT ≤ 1.0 A 7.6 ― 8.4 V Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA 1 10.5 V ≤ VIN ≤ 25 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 70 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 11.5 V ≤ VIN ≤ 21.5 V IOUT = 50 mA, Tj = 25°C 58 74 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.1 ― A TCVO 1 IOUT = 5 mA ― −1.0 ― mV/°C Quiescent current Average temperature coefficient of output voltage mV TA7809SB Electrical Characteristics (Unless otherwise specified, VIN = 15 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 8.64 9.0 9.36 V Reg.line 1 Tj = 25°C 11.5 V ≤ VIN ≤ 26 V ― 7 180 13 V ≤ VIN ≤ 19 V ― 2.5 90 Load regulation Reg.load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 180 250 mA ≤ IOUT ≤ 750 mA ― 4 90 Output voltage VOUT 1 Tj = 25°C 8.55 ― 9.45 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA Quiescent current change ΔIB 1 11.5 V ≤ VIN ≤ 26 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 75 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 12.5 V ≤ VIN ≤ 22.5 V IOUT = 50 mA, Tj = 25°C 56 72 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 1.0 ― A TCVO 1 IOUT = 5 mA ― −1.1 ― mV/°C Quiescent current Average temperature coefficient of output voltage 5 11.5 V ≤ VIN ≤ 24 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7810SB Electrical Characteristics (Unless otherwise specified, VIN = 16 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 9.6 10.0 10.4 V Reg·line 1 Tj = 25°C 12.5 V ≤ VIN ≤ 27 V ― 8 200 14 V ≤ VIN ≤ 20 V ― 2.5 100 Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Quiescent current change ΔIB Output noise voltage mV 5 mA ≤ IOUT ≤ 1.4 A ― 12 200 250 mA ≤ IOUT ≤ 750 mA ― 4 100 12.5 V ≤ VIN ≤ 25 V 5.0 mA ≤ IOUT ≤ 1.0 A 9.5 ― 10.5 V Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA 1 12.5 V ≤ VIN ≤ 27 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 80 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 13.5 V ≤ VIN ≤ 23.5 V IOUT = 50 mA, Tj = 25°C 55 72 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.9 ― A TCVO 1 IOUT = 5 mA ― −1.3 ― mV/°C Quiescent current Average temperature coefficient of output voltage mV TA7812SB Electrical Characteristics (Unless otherwise specified, VIN = 19 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 11.5 12.0 12.5 V Reg·line 1 Tj = 25°C 14.5 V ≤ VIN ≤ 30 V ― 10 240 16 V ≤ VIN ≤ 22 V ― 3 120 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 240 250 mA ≤ IOUT ≤ 750 mA ― 4 120 Output voltage VOUT 1 Tj = 25°C 11.4 ― 12.6 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.3 8.0 mA Quiescent current change ΔIB 1 14.5 V ≤ VIN ≤ 30 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 90 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 15 V ≤ VIN ≤ 25 V IOUT = 50 mA, Tj = 25°C 55 71 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.7 ― A TCVO 1 IOUT = 5 mA ― −1.6 ― mV/°C Quiescent current Average temperature coefficient of output voltage 6 14.5 V ≤ VIN ≤ 27 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7815SB Electrical Characteristics (Unless otherwise specified, VIN = 23 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 14.4 15.0 15.6 V Reg·line 1 Tj = 25°C 17.5 V ≤ VIN ≤ 30 V ― 11 300 20 V ≤ VIN ≤ 26 V ― 3 150 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 300 250 mA ≤ IOUT ≤ 750 mA ― 4 150 Output voltage VOUT 1 Tj = 25°C 14.25 ― 15.75 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.4 8.0 mA Quiescent current change ΔIB 1 17.5 V ≤ VIN ≤ 30 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 110 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 18.5 V ≤ VIN ≤ 28.5 V IOUT = 50 mA, Tj = 25°C 54 70 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.5 ― A TCVO 1 IOUT = 5 mA ― −2.0 ― mV/°C Quiescent current Average temperature coefficient of output voltage 17.5 V ≤ VIN ≤ 30 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV TA7818SB Electrical Characteristics (Unless otherwise specified, VIN = 27 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 17.3 18.0 18.7 V Reg·line 1 Tj = 25°C 21 V ≤ VIN ≤ 33 V ― 13 360 24 V ≤ VIN ≤ 30 V ― 4 180 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 360 250 mA ≤ IOUT ≤ 750 mA ― 4 180 Output voltage VOUT 1 Tj = 25°C 17.1 ― 18.9 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.5 8.0 mA Quiescent current change ΔIB 1 21 V ≤ VIN ≤ 33 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 125 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 22 V ≤ VIN ≤ 32 V IOUT = 50 mA, Tj = 25°C 52 68 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.4 ― A TCVO 1 IOUT = 5 mA ― −2.5 ― mV/°C Quiescent current Average temperature coefficient of output voltage 7 21 V ≤ VIN ≤ 33 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB TA7820SB Electrical Characteristics (Unless otherwise specified, VIN = 29 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 19.2 20.0 20.8 V Reg·line 1 Tj = 25°C 23 V ≤ VIN ≤ 35 V ― 15 400 26 V ≤ VIN ≤ 32 V ― 5 200 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 400 250 mA ≤ IOUT ≤ 750 mA ― 4 200 Output voltage VOUT 1 Tj = 25°C 19.0 ― 21.0 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.6 8.0 mA Quiescent current change ΔIB 1 23 V ≤ VIN ≤ 35 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 135 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 24 V ≤ VIN ≤ 34 V IOUT = 50 mA, Tj = 25°C 50 66 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.4 ― A TCVO 1 IOUT = 5 mA ― −3.0 ― mV/°C Quiescent current Average temperature coefficient of output voltage 23 V ≤ VIN ≤ 35 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV TA7824SB Electrical Characteristics (Unless otherwise specified, VIN = 33 V, IOUT = 500 mA, 0°C ≤ Tj ≤ 125°C) Symbol Test Circuit Output voltage VOUT Line regulation Characteristics Test Condition Min Typ. Max Unit 1 Tj = 25°C, IOUT = 100 mA 23.0 24.0 25.0 V Reg·line 1 Tj = 25°C 27 V ≤ VIN ≤ 38 V ― 18 480 30 V ≤ VIN ≤ 36 V ― 6 240 Load regulation Reg·load 1 Tj = 25°C 5 mA ≤ IOUT ≤ 1.4 A ― 12 480 250 mA ≤ IOUT ≤ 750 mA ― 4 240 Output voltage VOUT 1 Tj = 25°C 22.8 ― 25.2 V IB 1 Tj = 25°C, IOUT = 5 mA ― 4.6 8.0 mA Quiescent current change ΔIB 1 27 V ≤ VIN ≤ 38 V, IOUT = 5 mA, Tj = 25°C ― ― 1.0 mA Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz IOUT = 50 mA ― 150 ― μVrms Ripple rejection R.R. 3 f = 120 Hz, 28 V ≤ VIN ≤ 38 V IOUT = 50 mA, Tj = 25°C 50 66 ― dB Dropout voltage VD 1 IOUT = 1.0 A, Tj = 25°C ― 2.0 ― V Short circuit current limit ISC 1 Tj = 25°C ― 0.3 ― A TCVO 1 IOUT = 5 mA ― −3.5 ― mV/°C Quiescent current Average temperature coefficient of output voltage 8 27 V ≤ VIN ≤ 38 V 5.0 mA ≤ IOUT ≤ 1.0 A mV mV 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB Test Circuit 1/Standard Application Circuit Test Circuit 2 VNO Test Circuit 3 R.R. 9 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB 10 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB 11 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB 12 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB Precautions on Application (1) In regard to GND, be careful not to apply a negative voltage to the input/output terminal. (2) If a surge voltage exceeding the absolute maximum rating is applied to the input terminal or if a voltage in excess of the input terminal voltage is applied to the output terminal, the circuit may be destroyed. Particular care is necessary in the case of the latter. Circuit destruction may also occur if the input terminal shorts to GND in a state of normal operation, causing the output terminal voltage to exceed the input voltage (GND potential) and the electrical charge of the chemical capacitor connected to the output terminal to flow into the input side. Where these risks exist, take steps such as connecting zener and general silicon diodes to the circuit, as shown in the figure below. (3) When the input voltage is too high, the power dissipation of the three-terminal regulator, which is a series regulator, increases, causing the junction temperature to rise. In such a case, it is recommended to reduce the power dissipation, and hence the junction temperature, by inserting a power-limiting resistor RSD in the input terminal. The power dissipation PD of the IC is expressed in the following equation. Reducing VIN' below the lowest voltage necessary for the IC will cause ripple, deterioration in output regulation and, in certain circumstances, parasitic oscillation. To determine the resistance value of RSD, design with a margin, referring to the following equation. (4) Be sure to connect a capacitor near the input terminal and output terminal between both terminals and GND. The capacitances should be determined experimentally because they depend on PCB patterns. In particular, adequate investigation should be made to ensure there is no problem even in high or low temperatures 13 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB Package Dimensions SIP3-P-2.50A Unit : mm Weight: 1.5 g (typ.) 14 2007-06-06 TA7805,057,06,07,08,09,10,12,15,18,20,24SB RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 15 2007-06-06