TELCOM TC54VC5901ECB

1
TC54
VOLTAGE DETECTOR
FEATURES
■
■
■
■
■
Precise Detection Thresholds .... Standard ± 2.0%
Custom ± 1.0%
Small Packages ........... SOT-23A-3, SOT-89, TO-92
Low Current Drain ..................................... Typ. 1µA
Wide Detection Range .......................... 2.1V to 6.0V
Wide Operating Voltage Range ............ 1.5V to 10V
APPLICATIONS
■
■
■
■
■
Battery Voltage Monitoring
Microprocessor Reset
System Brownout Protection
Switching Circuit in Battery Backup
Level Discriminator
PIN CONFIGURATIONS
*SOT-23A-3
SOT-89-3
3
4
ORDERING INFORMATION
2
1 2 3
TC54
TC54
TC54
VOUT
2
3
VIN
VSS
VOUT
VSS
1
5
Output form:
N = Nch Open Drain
C = CMOS Output
Extra Feature Code: Fixed: 0
*SOT-23A-3 is equivalent to EIAJ (SC-59)
Tolerance:
1 = ± 1.0% (custom)
2 = ± 2.0% (standard)
FUNCTIONAL BLOCK DIAGRAM
2
PART CODE TC54 V X XX X X X XX XXX
Detected Voltage:
Ex: 21 = 2.1V; 60 = 6.0V
VIN
VSS
3
VOUT
The TC54 Series are CMOS voltage detectors, suited
especially for battery-powered applications because of their
extremely low 1µA operating current and small surfacemount packaging. Each part is laser trimmed to the desired
threshold voltage which can be specified from 2.1V to 6.0V,
in 0.1V steps.
The device includes a comparator, low-current highprecision reference, laser-trimmed divider, hysteresis circuit
and output driver. The TC54 is available with either an opendrain or complementary output stage.
In operation, the TC54's output (VOUT) remains in the
logic HIGH state as long as VIN is greater than the
–
specified threshold voltage (VDET
). When VIN falls below
–
V DET, the output is driven to a logic LOW. VOUT remains
LOW until VIN rises above V–DET by an amount V HYST,
whereupon it resets to a logic HIGH.
TO-92
VIN
1
2
GENERAL DESCRIPTION
TC54VC only
6
Temperature: E: – 40°C to + 85°C
Package Type and Pin Count:
CB: SOT-23A-3*, MB: SOT-89-3, ZB: TO-92-3
VIN
–
VOUT
1
+
Taping Direction:
Standard Taping
Reverse Taping
No suffix: TO-92 Bulk
7
*SOT-23A-3 is equivalent to EIAJ (SC-59).
VREF
VSS
3
8
TC54VN has open-drain output.
TC54VC has complementary output.
TC54-10 11/8/96
TELCOM SEMICONDUCTOR, INC.
4-279
VOLTAGE DETECTOR
TC54
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage (VIN) ..................................................................... 12V
Output Voltage: CMOS ............ (VSS – 0.3) to (VIN + 0.3)
Open Drain ................. (VSS – 0.3) to 12V
Output Current .........................................................50mA
Power Dissipation: (TA ≤ 70°C)
SOT-23A-3 .....................................................240mW
SOT-89-3 .......................................................400mW
TO-92
.......................................................440mW
Operating Temperature .......................... – 40°C to + 85°C
Storage Temperature ........................... – 65°C to + 150°C
Soldering Temperature ...................... 300°C, 10 seconds
* Static-sensitive device. Unused devices must be stored in conductive
material. Protect devices from static discharge and static fields. Stresses
above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional
operation of the device at these or any other conditions above those
indicated in the operational sections of the specifications is not implied.
Exposure to Absolute Maximum Rating Conditions for extended periods
may affect device reliability.
ELECTRICAL CHARACTERISTICS: TA = 25°C, unless otherwise specified.
Symbol
Parameter
Test Conditions
V–DET
Min
VIN
ISS
Operating Voltage
Quiescent Current
–
VDET
Threshold Voltage
VHYST
Hysteresis Range
IOUT
Output Current
Nch VDS = 0.5
VIN = 2.1V
3.0V
4.0V
5.0V
–
Tempco of (VDET
)
Pch VDS = 2.1V
– 40°C ≤ TA ≤ 85°C
VIN = 8.0V
–
TC (VDET
)
VIN =
= 2.1 to 6.0V
2.1V
3.0V
4.0V
5.0V
Typ
1.5
1.0
1.3
1.6
2.0
(V–DET)
x 0.98
(V–DET)
x 0.02
(V–DET)
x 0.05
7.7
10.1
11.5
13.0
– 10.0
± 100
Max
10.0
3.0
3.4
3.8
4.2
(V–DET)
x 1.02
(V–DET)
x 0.08
Unit
V
µA
V
V
mA
ppm/°C
PIN DESCRIPTION
Pin No.
Symbol
1
2
VIN
VOUT
3
VSS
4-280
Description
Analog input. This pin is both the power supply input and the voltage to be monitored.
–
Digital output. This output goes low when VIN drops below VDET
and returns
–
high when VIN rises above V DET + VHYST. (See timing chart).
Ground terminal.
TELCOM SEMICONDUCTOR, INC.
VOLTAGE DETECTOR
1
TC54
DESCRIPTION OF OPERATION
TIMING CHART
+
VDET
VIN
–
DETECT VOLTAGE VDET
RELEASE
RESET
OR
VOLTAGE
VOLTAGE
VHYST
MINIMUM OPERATING
VOLTAGE
GROUND LEVEL
OUTPUT VOLTAGE
GROUND LEVEL
Refer to the Timing Chart below. In normal steady-state
–
operation, when VIN > VDET
, the output will be at a logic high.
In the case of the TC54V, this is an open-drain condition. If
– , the output will pull down
and when the input falls below VDET
(Logic 0) to VSS. Generally, VOUT can pull down to within
0.5V of VSS at rated output current and input voltage. (See
the Electrical Characteristics section).
The output, VOUT, will stay valid until the input voltage
falls below the Minimum Operating Voltage, VIN(MIN), of
1.5V. Below this minimum operating voltage, the output is
undefined. During power-up or anytime VIN has fallen below
VIN (MIN), VOUT will remain undefined until VIN rises above
VIN(MIN), at which time the output will become valid. VOUT
+ .
will be in its active low state while VIN(MIN) < VIN < VDET
+
–
(VDET = VDET + VHYST). If and when the input rises above
V+DET, the output will assume its inactive state. (High for
TC54VC, open-drain for TC54VN).
2
3
4
APPLICATIONS
Refer to TelCom Semiconductor Application Note #2,
Using the TC54 Voltage Detector.
MARKING
SOT-23A-3
5
TO-92
SOT-89-3
1 2 3 4
5 6 7 8
9 10 11 12
a = output (Nch or CMOS) plus first voltage digit
2 3 4 5 6
Nch
M N P R S
CMOS
C D E F H
D
ex: CMOS 3.x = uuuu
b = first voltage decimal (0-9)
D 4
ex: CMOS 3.4 = uuuu
c & d = assembly lot number
6
a, b & c = 54_ (fixed)
d = output (C = CMOS, N = Nch)
e = first voltage digit (2-6)
f = first voltage decimal (0-9)
7
g = extra feature code : fixed : 0
h = detecting accuracy
1 = ± 1.0% (custom), 2 = ± 2.0% (standard)
i, j, k & l = assembly lot number
8
TELCOM SEMICONDUCTOR, INC.
4-281