TCP072E thru TCP120E TRIPOLAR PROTECTION FOR ISDN INTERFACES SANTA ANA DIVISION PRODUCT PREVIEW This Thyristor Surge Suppressor dedicated devices for SLIC interface and high speed data telecom line protection. Equivalent to a Tripolar TSPD with low capacitance. These devices provide : - low capacitance from lines to ground, allowing high speed transmission without signal attenuation. - good capacitance balance between lines in order to ensure longitudinal balance. - fixed breakdown voltage in both common and differential modes. - the same surge current capability in both common and differential modes. - A particular attention has been given to the internal wire bonding.The”4-point” configuration ensures a reliable protection, eliminating overvoltages introduced by the parasitic inductances of the wiring (Ldi/dt), especially for very fast transient overvoltages. !"BIDIRECTIONAL TRIPLE CROWBAR PROTECTION !"PEAK PULSE CURRENT: IPP = 30 A, 10/1000 µs !"BREAKDOWN VOLTAGE: TCP072E: 60 V TCP080E: 80 V TCP082E: 70 V TCP7120E: 120 V • AVAILABLE IN SO8 PACKAGES • LOW DYNAMIC BREAKOVER VOLTAGE: TCP072E: 80 V TCP080E: 150 V TCP082E: 90 V TCP120E: 200 V W W W . Microsemi .COM KEY FEATURES DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPLICATIONS/BENEFITS APPLICATIONS/BENEFITS !" COMPLIES WITH THE FOLLOWING STANDARDS: 10/700 µs 5/310 µs 10/700 µs 5/310 µs 1.2/50 µs µs 1/20 0.5/700 µs 0.2/310 µs CCITT K17 - K20 VDE 0433 VDE 0878 CNET KV A KV A KV A KV A TCPxx packages comply with requirements of UL94V-0 Copyright 2000 MSC1621.PDF 2000-11-28 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 TCP072E thur TCP120E UL94V-0 1.5 38 2 50 1.5 40 1.5 38 Page 1 TCP072E thru TCP120E TRIPOLAR PROTECTION FOR ISDN INTERFACES SANTA ANA DIVISION PRODUCT PREVIEW W W W . Microsemi .COM ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol IPP ITSM Tstg Tj TL Parameter Peak pulse current (see note 1) Value Unit 30 40 90 A 8 3.5 A -55 to + 150 °C 10/1000 µs 5/320 µs 2/10 µs tp = 10 ms Non repetitive surge peak on-state t=1s current (F = 50 Hz). Storage temperature range Maximum junction temperature Maximum lead temperature for soldering during 10s 150 260 °C Note 1 : Pulse waveform : 10/1000µs tr=10µs tp=1000µs 5/310µs tr=5µs tp=310µs 2/10µs tr=2µs tp=10µs THERMAL RESISTANCES Symbol Rth (j-a) Parameter Junction to ambient SO 8 Value Unit 170 °C/W ELECTRICALS Copyright 2000 MSC1621.PDF 2000-11-28 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2 TCP072E thru TCP120E TRIPOLAR PROTECTION FOR ISDN INTERFACES SANTA ANA DIVISION PRODUCT PREVIEW W W W . Microsemi .COM ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol Parameter VRM Stand-off voltage IRM Leakage current VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current VF C Forward Voltage Drop Capacitance Types IRM @ VRM IR @ max TCP072E TCP080E TCP082E TCP120E µA 10 10 10 10 V 56 70 66 105 mA 1 1 1 1 VBR VBO min max V 60 80 70 120 note 1 V 72 120 82 180 VBO dyn typ V 80 150 90 200 IBO IH max min note 1 mA 800 800 800 800 mA 150 150 150 150 Note 1 : Surge test according to CCITT 1.5kV,10/700 ms between Tip or Ring and ground. TCPxx 30 20 30 50 20 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 ELECTRICALS Copyright 2000 MSC1621.PDF 2000-11-28 50 Page 3 TCP072E thru TCP120E SANTA ANA DIVISION TRIPOLAR PROTECTION FOR ISDN INTERFACES PRODUCT PREVIEW W W W . Microsemi .COM NOTES Copyright 2000 MSC1621.PDF 2000-11-28 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4