TCP020E Tripolar Overvoltage Protection For Network Interfaces SANTA ANA DIVISION PRELIMINARY Transient suppressor TCP020E is dedicated to ISDN, T1, Ethernet, and data lines protection. Important features - very low breakover voltage combined with low capacitance. May be used as a triple or a single bi-directional suppressor – see schematic diagram. This product provides: - low capacitance, allowing high speed signal transmissions with low losses - low dynamic breakover voltage, protecting submicron microelectronic circuitry - Compliance with BELLCORE 1089-GR requirements for intrabuilding lightning and power fault surges. BIDIRECTIONAL TRIPLE CROWBAR PROTECTION PEAK PULSE CURRENT: IPP = 30 A, 10/1000 µs BREAKDOWN VOLTAGE: 18 V • AVAILABLE IN SO8 PACKAGES • LOW DYNAMIC BREAKOVER VOLTAGE: 25 V @ 2/10 µs • Low Capacitance: 30 pF This low stand-off voltage and low capacitance protector is well suited for use in high-speed interfaces as ISDN. APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S W W W. Microsemi .COM KEY FEATURES DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com COMPLIES WITH THE FOLLOWING STANDARDS: 10/700 µs 5/310 µs 10/700 µs 5/310 µs 1.2/50 µs 1/20 µs 0.5/700 µs 0.2/310 µs 15kV 1.2/50 µs 8/20 µs CCITT K17 - K20 VDE 0433 VDE 0878 CNET IEC801-2 IEC801-5 UL94V-0 1.5 KV 38 A 2 KV 50 A 1.5 KV 40 A 1.5 KV 38 A air discharge 4kV 100 A TCPxx packages comply with requirements of UL94V-0 TCP020E Copyright 2000 TCP020E.PDF 2002-05-02 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 1 TCP020E Tripolar Overvoltage Protection For Network Interfaces SANTA ANA DIVISION PRELIMINARY W W W. Microsemi .COM ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol IPP ITSM Tstg Tj TL Parameter Peak pulse current (see note 1) Value Unit 30 150 200 8 3.5 A -55 to + 150 °C 10/1000 µs 8/20 µs 2/10 µs tp = 10 ms Non repetitive surge peak on-state t=1s current (F = 50 Hz). Storage temperature range Maximum junction temperature Maximum lead temperature for soldering during 10s A 150 260 °C Value Unit 170 °C/W Note 1 : Pulse waveform : 10/1000µs tr=10µs tp=1000µs 8/20µs tr=8µs tp=20µs 2/10µs tr=2µs tp=10µs THERMAL RESISTANCES Symbol Rth (j-a) Parameter Junction to ambient SO 8 ELECTRICALS Copyright 2000 TCP020E.PDF 2002-05-02 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 2 TCP020E Tripolar Overvoltage Protection For Network Interfaces SANTA ANA DIVISION PRELIMINARY W W W. Microsemi .COM ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol Parameter VRM Stand-off voltage IRM Leakage current VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current VF C Forward Voltage Drop Types Capacitance IRM @ VRM IR @ max TCP020E µA 1 V 16 mA 1 VBR VBO IBO IH CP max dyn typ min max min max V 18 V 22 V 25 mA 100 mA 50 pF 30 VBO ELECTRICALS Copyright 2000 TCP020E.PDF 2002-05-02 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 3 TCP020E SANTA ANA DIVISION Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY W W W. Microsemi .COM PACKAGE DATA Copyright 2000 TCP020E.PDF 2002-05-02 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 4 TCP020E SANTA ANA DIVISION Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY W W W. Microsemi .COM NOTES Copyright 2000 TCP020E.PDF 2002-05-02 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 5