TCP135K2 DUAL ASYMMETRICAL TRANSIENT SUPPRESSOR SANTA ANA DIVISION PRODUCT PREVIEW This Thyristor Surge Suppressor Device is intended for protection of line card inputs. It provides most efficient polarity-dependent asymmetrical surge protection with negative protection voltage higher than positive. DUAL POLARITY-DEPENDENT ASYMMETRICAL TRANSIENT SUPPRESSOR PEAK CURRENT: IPP = 2 X 25 A 10/1000 µs HOLDING CURRENT IH: 110 mA MIN BREAKOVER VOLTAGE: -250 V, +200 V IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K20: VDE 0433: VDE 0878: RLM-88 FCC part 68: BELLCORE TR-NWT-001089: 10/700 µs 5/310 µs 10/700 µs 5/310 µs 1.2/50 µs 1/20 µs 0.5/700 µs 0.2/310 µs 2/10 µs 2/10 µs 1 kV 38 A 2 kV 50 A 1.5 kV 40 A 1 Kv 38 A 2.5 kv 125 A (*) 2/10 µs 2/10 µs 10/1000 µs 10/1000 µs 2.5 kv 125 A (*) 1 kV 40 A (*) W W W. Microsemi .COM KEY FEATURES DESCRIPTION APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S SCHEMATIC DIAGRAM UL94V-0 TCPxx packages comply with requirements of UL94V-0 TIP 1 8 GND NC 2 7 GND NC 3 6 GND RING 4 5 GND TCP135K2 (*) with series resistors or PTC. Copyright 2000 TCP135K2.PDF 2001-09-13 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1 TCP135K2 DUAL ASYMMETRICAL TRANSIENT SUPPRESSOR SANTA ANA DIVISION PRODUCT PREVIEW W W W. Microsemi .COM ABSOLUTE LIMITING VALUES Symbol Parameter Conditions Value Unit ITSP Non-repetitive on-state peak pulse current 0.3/300 µs RLM-88 +/- 2 X 20 A ITSM Non-repetitive on-state RMS current 50/60 Hz AC 0.2 s 50/60 Hz AC 5s 50/60 Hz AC 900 s TJ Junction temperature range 4.6 1.0 0.35 -40 +150 A A A C Tstg Storage temperature range -40 +150 C Parameter Terminal Tip-Ground Ring-Ground VDRM V max min +131 -183 +131 -183 ELECTRICAL IDRM µA max min +10 -10 +10 -10 CHARACTERISTICS (TJ = IH IBO mA mA max min max min +110 -110 +110 -110 +110 -110 +110 -110 O – 70°C) VBO V max min +145 -195 +145 -195 Cp pF max 100 100 Notes 1, 2 1, 2 Notes: 1. VBO and IBO measurement at AC 50/60 Hz 2. Cp measurement at VD = -60 V –0 V, V AC = 100 mV, f AC = 100 KHz TJ = 25°C -254 +202 -254 +202 ±2X2A TJ = 70°C -261 +209 -261 +209 per RLM - 88 Temperature Copyright 2000 TCP135K2.PDF 2001-09-13 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 ELECTRICALS TJ = 0°C IMPULSE BREAKDOWN VOLTAGE CHARACTERISTIC VALUES Tip-Ground Ring-Ground Test Condition V V min max min max 0.3/300 µs -250 +198 -250 +198 Terminal Page 2 TCP135K2 SANTA ANA DIVISION DUAL ASYMMETRICAL TRANSIENT SUPPRESSOR PRODUCT PREVIEW W W W. Microsemi .COM NOTES Copyright 2000 TCP135K2.PDF 2001-09-13 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3 This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.