TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 FEATURES • • • • • DCT OR DDU PACKAGE (TOP VIEW) Low Supply Current…20 µA Typ Single Power Supply Rail-to-Rail Common-Mode Input Voltage Range Push-Pull Output Circuit Low Input-Bias Current 1OUT 1 8 VCC+ 1IN- 2 7 2OUT 1IN+ VCC– 3 6 2IN- 4 5 2IN+ APPLICATIONS • • • • • Battery Packs for Sensing Battery Voltage MP3 Players, Digital Cameras, PMPs Cellular Phones, PDAs, Notebook Computers Test Equipment General-Purpose Low-Voltage Applications DESCRIPTION/ORDERING INFORMATION The TLV7256 is a CMOS-type general-purpose dual comparator capable of single power-supply operation and using lower supply currents than the conventional bipolar comparators. Its push-pull output can connect directly to local ICs such as TTL and CMOS circuits. ORDERING INFORMATION (1) PACKAGE (2) TA –40°C to 85°C SSOP – DCT VSSOP – DDU (1) (2) ORDERABLE PART NUMBER Reel of 3000 TLV7256IDCTR Reel of 250 TLV7256IDCTT Reel of 3000 TLV7256IDDUR TOP-SIDE MARKING PREVIEW YAUA For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Typical Application Circuit VCC VIN C1 R1 C2 VOUT R2 VREF Figure 1. Threshold Detector Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006–2007, Texas Instruments Incorporated TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX 1.5 7 UNIT VCC Supply voltage VID Differential input voltage VI Input voltage IO Output current θJA Thermal resistance, juction to ambient (2) PD Power dissipation TA Operating free-air temperature range –40 85 °C Tstg Storage temperature range –55 125 °C (1) (2) V V VCC– VCC+ V ±35 mA DCT package 220 DDU package 227 DCT package 250 DDU package 200 °C/W mW Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Package thermal impedance is calculated according to JESD 51-7. Recommended Operating Conditions MIN 2 MAX UNIT VCC Supply voltage 1.8 5 V TA Operating free-air temperature –40 85 °C Submit Documentation Feedback TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 Electrical Characteristics VCC+ = 5 V, VCC– = GND, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN 25°C TYP MAX ±2 ±7 VIO Input offset voltage IIO Input offset current 25°C 2 II Input bias current 25°C 4 VCM Common-mode input voltage 25°C 0 CMRR Common-mode rejection ratio 25°C 48 –40°C to 85°C 48 ∆VCM = 5 V 0 ≤ VCM ≤ 5 V Output = High, VIN = 5 V 25°C Output = Low, VIN = 5 V Output = High, VIN = 5 V ICC Supply current Output = Low, VIN = 5 V Output = High, VIN = 2.5 V Output = High, VIN = 2.5 V Output = Low, VIN = 2.5 V Voltage gain Isink Sink current VOL = 0.5 V Isource Source current VOH = 4.5 V VOL Low-level output voltage Isink = 5 mA VOH High-level output voltage Isource = 5 mA 65 V dB 37 51 40 60 70 20 32 26 42 µA 40 –40°C to 85°C 53 25°C 88 25°C 25 –40°C to 85°C 20 25°C 30 –40°C to 85°C 25 25°C dB 33 mA 35 0.07 –40°C to 85°C mA 0.12 0.20 25°C 4.9 –40°C to 85°C 4.85 Submit Documentation Feedback pA 61 25°C VD = 3 V, 1 V ≤ VOUT ≤ 4 V mV pA VCC –40°C to 85°C Output = Low, VIN = 2.5 V AVD ±8 –40°C to 85°C UNIT 4.93 V V 3 TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 Electrical Characteristics VCC+ = 2.7 V, VCC– = GND, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TYP MAX ±2 ±8 VIO Input offset voltage IIO Input offset current 25°C 2 II Input bias current 25°C 4 VCM Common-mode input voltage 25°C 0 CMRR Common-mode rejection ratio 25°C 42 –40°C to 85°C 42 ∆VCM = 2.7 V 0 ≤ VCM ≤ 2.7 V 25°C Output = Low, VIN = 2.7 V Output = High, VIN = 2.7 V ICC Supply current Output = Low, VIN = 2.7 V Output = High, VIN = 1.35 V Output = High, VIN = 1.35 V Output = Low, VIN = 1.35 V Voltage gain Isink Sink current VOL = 0.5 V Isource Source current VOH = 2.2 V VOL Low-level output voltage Isink = 5 mA VOH High-level output voltage Isource = 5 mA pA 57 V dB 30 55 36 55 65 30 48 35 55 µA 55 –40°C to 85°C 65 25°C 88 25°C 13 –40°C to 85°C 11 25°C 15 –40°C to 85°C 13 25°C dB 18 mA 20 0.11 –40°C to 85°C mA 0.16 0.19 25°C 2.54 –40°C to 85°C 2.45 Submit Documentation Feedback mV 65 25°C VD = 1.7 V, 0.5 V ≤ VOUT ≤ 2.2 V UNIT pA VCC –40°C to 85°C Output = Low, VIN = 1.35 V AVD ±9 –40°C to 85°C Output = High, VIN = 2.7 V 4 MIN 25°C 2.60 V V TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 Electrical Characteristics VCC+ = 1.8 V, VCC– = GND, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN 25°C TYP MAX ±2 ±8 VIO Input offset voltage IIO Input offset current 25°C 2 II Input bias current 25°C 4 VCM Common-mode input voltage 25°C 0 CMRR Common-mode rejection ratio 25°C 40 –40°C to 85°C 40 ∆VCM = 5 V 0 ≤ VCM ≤ 5 V Output = High, VIN = 1.8 V 25°C Output = Low, VIN = 1.8 V Output = High, VIN = 1.8 V ICC Supply current Output = Low, VIN = 1.8 V Output = High, VIN = 0.9 V Output = High, VIN = 0.9 V Output = Low, VIN = 0.9 V Voltage gain Isink Sink current VOL = 0.5 V Isource Source current VOH = 2.2 V VOL Low-level output voltage Isink = 5 mA VOH High-level output voltage Isource = 5 mA 55 V dB 30 55 33 47 51 20 32 25 37 µA 34 –40°C to 85°C 40 25°C 88 25°C 6 –40°C to 85°C 5 25°C 5 –40°C to 85°C 4 25°C dB 9 mA 9 0.2 –40°C to 85°C mA 0.34 0.39 25°C 1.3 –40°C to 85°C 1.2 Submit Documentation Feedback pA 60 25°C VD = 1.1 V, 0.4 V ≤ VOUT ≤ 1.5 V mV pA VCC – 0.3 –40°C to 85°C Output = Low, VIN = 0.9 V AVD ±9 –40°C to 85°C UNIT 1.6 V V 5 TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 Switching Characteristics VCC+ = 5 V, VCC– = GND, TA = 25°C (unless otherwise noted) PARAMETER tPLH Propagation delay time (turn on) tPHL Propagation delay time (turn off) tTLH tTHL Response time TEST CONDITIONS TYP Overdrive = 100 mV 680 TTL step input 500 Overdrive = 100 mV 250 TTL step input 380 Overdrive = 100 mV 60 8 UNIT ns ns ns Switching Characteristics VCC+ = 3 V, VCC– = GND, TA = 25°C (unless otherwise noted) TYP UNIT tPLH Propagation delay time (turn on) PARAMETER Overdrive = 100 mV 550 ns tPHL Propagation delay time (turn off) Overdrive = 100 mV 250 ns tTLH tTHL 6 Response time TEST CONDITIONS Overdrive = 100 mV Submit Documentation Feedback 30 8 ns TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs FREQUENCY VCC = 5 V SUPPLY CURRENT vs FREQUENCY VCC = 2.7 V 1000 100 10 1000 ICC – Supply Current – µA ICC – Supply Current – µA 100 10 100 10 1 1.E+00 1.E+01 1.E+02 1.E+04 10 100 1.E+03 10k 1.E+05 100k 1.E+06 1 1k 1M 1 10 100 1.E+03 10k 1.E+05 100k 1.E+06 1 1k 1M 1.E+00 1.E+01 1.E+02 1.E+04 1 10 100 1.E+03 10k 1.E+05 100k 1.E+06 1 1k 1M 1.E+00 1.E+01 1.E+02 1.E+04 f – Frequency – Hz f – Frequency – Hz f – Frequency – Hz SUPPLY CURRENT vs COMMON-MODE VOLTAGE VCC = ±2.5 V SUPPLY CURRENT vs COMMON-MODE VOLTAGE VCC = ±1.35 V SUPPLY CURRENT vs COMMON-MODE VOLTAGE VCC = ±0.9 V 45 45 40 40 40 35 35 35 ICC – Supply Current – µA 45 30 25 20 15 10 ICC – Supply Current – µA ICC – Supply Current – µA 1000 ICC – Supply Current – µA SUPPLY CURRENT vs FREQUENCY VCC = 1.8 V 30 25 20 15 10 -3 -2 -1 0 1 2 3 20 15 10 0 0 -1.5 0 25 5 5 5 30 -1 -0.5 0 0.5 1 -1 1.5 -0.8 -0.6 -0.4 -0.2 PROPAGATION DELAY TIME, HIGH TO LOW VCC = 5 V 0 0.2 0.4 0.6 0.8 1 VCM – Common-Mode Voltage – V VCM – Common-Mode Voltage – V VCM – Common-Mode Voltage – V PROPAGATION DELAY TIME, HIGH TO LOW VCC = 2.7 V PROPAGATION DELAY TIME, HIGH TO LOW VCC = 1.8 V OD = 10 mV OD = 10 mV OD = 10 mV OD = 100 mV OD = 100 mV 1 V/div 1 V/div 1 V/div OD = 100 mV Input Input Input 500 ns/div 500 ns/div 500 ns/div Submit Documentation Feedback 7 TLV7256 DUAL COMPARATOR www.ti.com SLCS147A – OCTOBER 2006 – REVISED JANUARY 2007 TYPICAL CHARACTERISTICS (continued) PROPAGATION DELAY TIME, LOW TO HIGH VCC = 5 V PROPAGATION DELAY TIME, LOW TO HIGH VCC = 2.7 V OD = 10 mV 1 V/div OD = 10 mV Input OD = 100 mV OD = 100 mV 1 V/div 1 V/div OD = 100 mV PROPAGATION DELAY TIME, LOW TO HIGH VCC = 1.8 V OD = 10 mV Input Input 500 ns/div 8 500 ns/div Submit Documentation Feedback 500 ns/div PACKAGE OPTION ADDENDUM www.ti.com 21-Mar-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV7256IDDUR ACTIVE VSSOP DDU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7256IDDURG4 ACTIVE VSSOP DDU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated