TELTRON TMS400

Model
www.teltron.com
TMS400
X-Band Motion Sensor
Applications
Features
TMS400 is X-band Doppler motion sensor to detect
motion. It consists of DR(dielectric resonator)
oscillator, passive diode and patch antennas
and provides most reliable solution in motion
detection.
Intrusion alarm
Automatic door
Obstruction alarm system
Velocity measurement
Automatic light control-energy saving
System air-conditioner-zone control
Antenna beam pattern
H-axis
Picture
E-axis
E-axis
H-axis
Electrical Specifications
Parameters
Min.
Output Power (EIRP)
Current Consumption
CW
Unit
Condition
Over Temp.
10
4.75
5
5.25
60
30
CW
Settling time
6
Noise
10
3~80 Hz
Received Signal
20
max
3dB Antenna Beam Width - E-axis
74
3dB Antenna Beam Width - H-axis
85
Operating temp.
-20
+55
Storage temp.
-30
+70
Size
Pulse
Operation
Max.
10,525±12.5
Frequency
Power Supply
Typ.
51.5 x 19.2 x 9.0
Pulse Width
5
Duty Cycle
1
Average Current
2
Warning : The specifications can be changed without any notice.
202 ITplex 26-41 Gajeongbuk-ro, Yuseong-gu, Daejeon 305-343 Korea
TEL : +82-42-360-2000 FAX : +82-360-2010 e-mail : [email protected]
@5% duty
Model
TMS400
www.teltron.com
X-Band Motion Sensor
Pin Description
Dimension
Application Circuit Example
#
Pin Name
Explanation
1
VDD
Power, +5V
2
IF
Output
3
GND
Ground
4
GND
Ground
Block Diagram
TMS400
Tx
Rx
Osc.
Mixer
IF
Warning : To avoid a fatal damage, it should be carefully handled
and installed under ESD protection condition.
202 ITplex 26-41 Gajeongbuk-ro, Yuseong-gu, Daejeon 305-343 Korea
TEL : +82-42-360-2000 FAX : +82-360-2010 e-mail : [email protected]