TANTALUM ELECTROLYTIC CAPACITORS TNF Series (High Performance Polymer type Chip Tantalum Capacitor with Face-down Type TNF series) Features • A high function and reliability are achieved by uniting the electroconductive polymer and the lower electrode structure. • This type reduces ESR be using high performance polymer based on our original manufacturing process. • This type is suitable for high-density implementation such as the multimedia connection. Product specifications Test conditions JIS C5101-1:1998 TNF Operating temperature range –55°C ~ +105°C Product code: (Example) TNF type LA case 10V 33 µF±20%, ESR 200mΩ Rated voltage DC2.5 ~ 10V 85°C Surge voltage DC3V ~ 13V 85°C Derated voltage DC1.6 ~ 6.3V (105°C) Capacitance 10 ~ 100µF 120Hz Capacitance tolerance ±20% 120Hz Leakage current Refer to standard product table tanδ 0.1 or less ESR LM case 500mΩMAX LP case 200mΩ,500mΩMAX 100kHz LA case 200mΩ,500mΩMAX TNF LA 1A 336 M T R X F Lead-free solder plating Specific product code Packing polarity code With or without taping Capacitance tolerance code(M : ± 20%) Capacitance code Rated voltage code Type of series Case size code Outline of drawings and dimensions N7Aa H L 120Hz W C/C ±20% or less Surge withstanding tanδ Specified initial value or less voltage LC 300% or less Specified initial value or less a l l Specified initial value C/C Dimensions (Unit : mm) Case code L±0.1 W±0.1 LM LP LA 1.6 2.0 3.2 0.85 1.25 1.60 Case size H±0.1 R±0.1 0.8 0.9 0.9 0.5 0.5 0.8 105 –55 0.10 0.14 – Value shown table Temperature characteristics a±0.1 0.65 0.90 1.20 Measure the specified or less characteristics in each stage. Refer to standard product table — 1CV or 30µA or less C/C ±20% or less Solder heat resistance Standard value and case size Capacitance Code 106 156 226 336 476 686 107 2.5 0E Rated voltage (V.DC) 4 6.3 0G 0J LM 10 1A LP LP LP LP tanδ Specified initial value or less LC 300% or less Specified initial value or less C/C +30% ~ -20% or less Moisture resistance no load tanδ Specified initial value or less LC 300% or less Specified initial value or less LA C/C ±20% or less LA High-temperature load LA LA Failure rate 129 Reflow Board surface peak temperature: 250°C 5S 217°C or more: within 90 sec. Leave at 40°C and 90 to 95%RH for 500 hours. 85°C. The rated voltage is tanδ Specified initial value or less applied through a protective LC 300% or less Specified initial value or less resistor of 3Ω for 1000 hours. C/C ±20% or less Thermal shock Charge a surge voltage through a protective resistor of 33Ω for 30 seconds and discharge it for 5 minutes and 30 seconds at 85°C. Repeat this operation 1000 times. -20∼0％ 0∼+30％ – tanδ LC μF 10 15 22 33 47 68 100 — tanδ Specified initial value or less LC 300% or less Specified initial value or less 1% / 1000hrs Leave at -55°C, normal temperature, 85°C, and normal temperature for 30 min., 15 min., 30 min., and 15 min. Repeat this operation 5 times running. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TNF series Standard product table - TNF series Rated voltage Capacitance Ｖ.ＤＣ μＦ 2.5 47 100 4 33 68 6.3 10 22 47 10 10 33 tanδ 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Leakage current μA 11.8 11.8 25.0 25.0 13.2 13.2 27.2 27.2 10.0 13.9 13.9 29.6 29.6 10.0 10.0 33.0 33.0 Case code LP LP LA LA LP LP LA LA LM LP LP LA LA LP LP LA LA Product name TNFLP0E476MTRF TNFLP0E476MTRXF TNFLA0E107MTRF TNFLA0E107MTRXF TNFLP0G336MTRF TNFLP0G336MTRXF TNFLA0G686MTRF TNFLA0G686MTRXF TNFLM0J106MTRF TNFLP0J226MTRF TNFLP0J226MTRXF TNFLA0J476MTRF TNFLA0J476MTRXF TNFLP1A106MTRF TNFLP1A106MTRXF TNFLA1A336MTRF TNFLA1A336MTRXF ESR（100kHz） Maximum permissible ripple current mΩ （20℃ 100kHz）mArms 500 350 200 550 500 380 200 600 500 350 200 550 500 380 200 600 500 320 500 350 200 550 500 380 200 600 500 350 200 550 500 380 200 600 Marking indication TNF series LM・LP case Jｊ ① ② LA case ③ N7AA ① ② ③ Hitachi AIC Inc. ①Simplified code of nominal capacitance (J:22µF) ②Simplified code of rated voltage (j:6.3V) ③Anode indication belt mark + + ④ ①Simplified code of nominal capacitance (N7:33µF) ②Simplified code of rated voltage (A:10V) ③Lot indication (A:for manufacturing in January, 2009) ④Anode indication belt mark 130