TP Series Tiny Pushbutton Switches Features/Benefits Subminiature size—capable of switching 1 AMP Vertical & right angle terminations Models Available PC & panel mount models Snap-in front panel mounting available Typical Applications Pushbutton B Telecommunications and networking equipment Computers and peripherals Instrumentation and controls Build-A-Switch Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches with standard options are shown on pages B-11 and B-12. Available options are shown and described on pages B-12 thru B-16. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Typical Example: T P 1 1 S H 8 A B E Switch Function TP11 (STD.) SPST Off-Mom. TP12 (STD.) SPDT On-Mom. TP21 DPST Off-Mom. Actuator or Bushing SH (STD.) .155 high plunger, unthreaded, .220 high bushing, round SH8 (STD.) .155 high plunger, unthreaded, .220 high bushing, flat SH9 (STD.) .155 high plunger, .220 high bushing J80 Snap-in J81 Snap-in with frame LT .215 high plunger, .310 high bushing, flat LT9 .215 high plunger, unthreaded, .310 high bushing, flat MS9 .130 high plunger, .020 high bushing, round Terminations A (STD.) Right angle, PC thru-hole C (STD.) PC Thru-hole Z (STD.) Solder lug AV Vertical right angle, PC thru-hole V3 Vertical mount, v-bracket W Wire wrap Contact Material B (STD.) Gold Q (STD.) silver K Gold M silver G Gold over silver L Gold over silver Seal E (STD.) Epoxy Cap Color 2 (STD.) Black NONE Models with no cap 1 White 3 Red Frame Color 2 (STD.) Black NONE Models with no frame B-10 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 TP Series Tiny Pushbutton Switches Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 1 AMP @ 120 V AC or 28 V DC. See page B-16 for additional ratings. ELECTRICAL LIFE: TP11, TP21 MODELS: 60,000 make-and-break cycles at full load. TP12 MODELS: 30,000 cycles. CONTACT RESISTANCE: Below 20 milliohms typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level. OPERATING TEMPERATURE: –30_C to 85_C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). PLUNGER: Thermoplastic polyester (UL 94V-0). CAP & FRAME: Nylon, black standard. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page B-16 for additional contact materials. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page B-16 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass nickel plated. Lockwasher: Steel, nickel plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SWITCHES WITH STANDARD OPTIONS ÑÑÑ POS. 1 POS. 2 PART NUMBER FUNCTION TP11SHZQE TP12SHZQE TP21SHZQE SPST OFF MOM. SPDT ON MOM. DPST OFF MOM. SP Models MOM. = Momentary NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel & PC mounting information, see page B-13. POS. 1 PART NUMBER FUNCTION TP11SH8ABE TP12SH8ABE SPST OFF SPDT ON DP Models TP12SHZQE SPDT Omit center terminals for SPST & DPST models. ÑÑ ÑÑ POS. 2 MOM. MOM. TP12SH8ABE MOM. = Momentary SPDT NOTE: For PC mounting information, see page B-14. Omit center terminal for SPST models. PART NUMBER FUNCTION TP11SH9ABE TP12SH9ABE SPST OFF ÑÑ ÑÑ SPDT ON MOM. POS. 1 POS. 2 MOM. TP12SH9ABE SPDT MOM. = Momentary NOTE: For PC mounting information, see page B-14. Omit center terminal for SPST models. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 S Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 B-11 B Pushbutton Specifications TP Series Tiny Pushbutton Switches SWITCHES WITH STANDARD OPTIONS PART NUMBER FUNCTION TP11SH9AVBE SPST ÑÑÑ POS. 1 POS. 2 OFF MOM. MOM. = Momentary TP11SH9AVBE NOTE: For PC mounting information, see page B-14. SPST B Pushbutton SWITCH FUNCTION SWITCH FUNCTION POS. 1 NO. POLES MODEL NO. TP11 (STD.) OFF ÑÑÑ ÑÑÑ POS. 2 MOM. CONNECTED TERMINALS POS. 1 POS. 2 SCHEMATIC OPEN 1-3 SP SPST TP12 (STD.) ON MOM. 2-1 2-3 SPDT DP TP21 OFF MOM. OPEN 1-3,4-6 DPST MOM. = Momentary All models with all options when ordered with G, L, M or Q contact material. CAP COLOR ACTUATOR—SNAP-IN FRONT MOUNT ACTUATOR OR BUSHING J80 FRAME COLOR SNAP-IN PANEL MOUNTING OPTION CODE CAP COLOR 2 (STD.) BLACK TP11J80ZQE 1 WHITE SPST 3 RED NOTE: No frame color choice required. J81 SNAP-IN WITH FRAME PANEL MOUNTING OPTION CODE 2 NONE FRAME COLOR (STD.) BLACK No Frame Color (J80 option) Cap and Frame Finish: matte. Other colors available, consult Customer Service Center. NOTE: Available with Z, C, or W terminations. TP11J81ZQE SPST B-12 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 TP Series Tiny Pushbutton Switches BUSHING ACTUATOR OR BUSHING SH (STD.) .155“ HIGH PLUNGER, .220“ HIGH BUSHING, THREADED, FLAT SH8 (STD.) .155“ HIGH PLUNGER, .220“ HIGH BUSHING, UNTHREADED SH9 (STD.) .155“ HIGH PLUNGER, .220“ HIGH BUSHING, UNTHREADED, FLAT LT .215“ HIGH PLUNGER, .310“ HIGH BUSHING, THREADED LT9 MS9 .130“ HIGH PLUNGER .215“ HIGH PLUNGER, .310“ HIGH BUSHING, UNTHREADED B Pushbutton Standard with Z, C, W terminations. Standard with A, AV, V3 terminations. Not available with Z terminations. { Subtract .016 (0,41) for models with A, AV or V3 terminations. PANEL MOUNTING 10-48 BUSHING Without locking ring 1/4 IN. BUSHING With standard locking ring Without locking ring With standard locking ring NOTE: One mounting nut, locking ring and lockwasher supplied standard with 10-48 threaded bushings (two nuts with 1/4-40 bushings). Optional mounting nut and locking ring styles and finishes available separately, see section L. TERMINATIONS C Z (STD.) PC THRU-HOLE SP DP W (STD.) SOLDER LUG SP DP WIRE WRAP SP DP PC MOUNTING Not available with MS9 bushing or K, L or M contact material. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 S Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 B-13 TP Series Tiny Pushbutton Switches TERMINATIONS A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP11SH9ABE SPST Pushbutton B TP11 Only A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP12SH9ABE SPDT TP12 Only A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP21SH9ABE DPST TP21 Only AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP11SH9AVBE SPST TP11 Only B-14 NOTE: Terminal bend radii and lead-in manufacturing option. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 TP Series Tiny Pushbutton Switches TERMINATIONS AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP12SH9AVBE SPDT AV NOTE: Terminal bend radii and lead-in manufacturing option. VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TP21SH9AVBE DPST TP21 Only V3 NOTE: Terminal bend radii and lead-in manufacturing option. VERTICAL MOUNT, V-BRACKET PC MOUNTING TP11SH9V3BE SPST TP11 Only V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING TP12SH9V3BE SPDT TP12 Only C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 B-15 Pushbutton TP12 Only B TP Series Tiny Pushbutton Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING TP21SH9V3BE Pushbutton B DPST TP21 Only CONTACT MATERIAL OPTION CODE CONTACT MATERIAL TERMINAL PLATING GOLD 1 B (STD.) K RATINGS GOLD 1 TIN-LEAD 6 LOW LEVEL / DRY CIRCUIT 0 4 VA MAX. 0.4 MAX @ 20 V AC OR DC MAX. MAX SILVER 5 Q (STD.) 45 SILVER 4,5 POWER 1 AMP @ 120 V AC OR 28 V DC. DC TIN-LEAD 6 M GOLD 3 G 23 GOLD OVER SILVER 2,3 L LOW LEVEL / DRY CIRCUIT OR POWER TIN-LEAD 6 0.4 VA MAX @ 20 V AC OR DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC. CONTACT MATERIAL / APPLICATION RECOMMENDATIONS – SEE CHART, PAGE L-31. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A, AV, V3 & W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. Q contact material standard with C & Z terminations. 4 END CONTACTS: Coin silver, silver plated. with all options when ordered with G, L, M or Q contact material. K, L & M contact materials not available with Z terminations. 5 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. SEAL E (STD.) EPOXY SEAL B-16 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99