TOSHIBA TPC6504

TPC6504
TOSHIBA Transistor
Silicon NPN Epitaxial Type
TPC6504
High-Speed Switching Applications
DC-DC Converter Applications
Strobe Applications
Unit: mm
•
High DC current gain
•
Low collector-emitter saturation voltage : VCE (sat) = 0.17 V (max)
•
High-speed switching
: hFE = 400 to 1000 (IC = 0.1 A)
: tf = 85 ns (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
VCBO
100
V
VCEX
80
V
VCEO
50
V
VEBO
7
V
DC
IC
1.0
Pulse
ICP
2.0
IB
0.1
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
(Note 1)
Base current
Collector power
dissipation
(Note 2)
Junction temperature
Storage temperature range
DC
t = 10 s
PC
0.8
1.6
A
A
W
JEDEC
―
JEITA
―
TOSHIBA
Tj
150
°C
Tstg
−55 to 150
°C
2-3T1C
Weight: 0.011 g (typ.)
Note 1: Ensure that the channel temperature does not exceed 150°C during use of the device.
Note 2: Mounted on an FR4 board (glass-epoxy; 1.6 mm thick; Cu area, 645 mm2)
Note 3: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2009-07-23
TPC6504
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Conditions
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = 100 V, IE = 0
⎯
⎯
100
nA
Emitter cut-off current
IEBO
VEB = 7 V, IC = 0
⎯
⎯
100
nA
V (BR) CEO
IC = 10 mA, IB = 0
50
⎯
⎯
V
hFE (1)
VCE = 2 V, IC = 0.1 A
400
⎯
1000
hFE (2)
VCE = 2 V, IC = 0.3 A
200
⎯
⎯
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
VCE (sat)
IC = 300 mA, IB = 6 mA
⎯
⎯
0.17
V
Base-emitter saturation voltage
VBE (sat)
IC = 300 mA, IB = 6 mA
⎯
⎯
1.1
V
VCB = 10 V, IE = 0, f = 1 MHz
⎯
5
⎯
pF
⎯
35
⎯
⎯
680
⎯
⎯
85
⎯
Collector output capacitance
Cob
Rise time
Switching time
tr
Storage time
See Figure 1 circuit diagram.
VCC ≈ 30 V, RL = 100 Ω
IB1 = IB2 = 10mA
tstg
Fall time
tf
ns
Figure 1. Switching Time Test Circuit & Timing Chart
VCC
20 μs
RL
IB1
Input
0
IB1
Output
IB2
IB2
Duty cycle < 1%
Circuit Configuration
6
5
Marking
Lot code (month)
4
Part No.
(or abbreviation code)
1
2
Pin #1
3
Lot No.
H2D
Product-specific code
Lot code
(year)
Note 4
Note 4 : A dot marking identifies the indication of product Labels.
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2009-07-23
TPC6504
IC – VCE
hFE – IC
1
20
10000
10
15
6
DC current gain hFE
Collector current IC
(A)
8
0.8
4
0.6
2
0.4
IB = 1mA
Ta = 100°C
1000
25
−55
100
0.2
Common emitter
Ta = 25°C
Single pulse test
0
0
0.2
0.4
0.6
0.8
1
10
1.2
Common emitter
VCE = 2 V
Single pulse test
0.001
Collector-emitter voltage VCE (V)
0.01
Collector current IC
VCE (sat) – IC
Base-emitter saturation voltage
VBE (sat) (V)
Common emitter
IC/IB = 50
Single pulse test
Ta = 100°C
25
−55
0.01
0.001
0.01
0.1
Collector current IC
1
(A)
VBE (sat) – IC
10
0.1
Common emitter
IC/IB = 50
Single pulse test
25
1
Ta = 100°C
0.1
0.001
1
(A)
−55
0.01
Collector current IC
0.1
1
(A)
IC-VBE
(A)
1
Collector current IC
Collector-emitter saturation voltage
VCE (sat) (V)
1
0.1
Common emitter
VCE = 2 V
Single pulse test
0.8
0.6
0.4
Ta = 100°C
25
−55
0.8
1
0.2
0
0
0.2
0.4
0.6
Base-emitter voltage
1.2
VBE (V)
3
2009-07-23
TPC6504
rth – tw
Transient thermal resistance
rth (°C/W)
1000
100
10
Curves should be applied in thermal limited area.
Single nonrepetitive pulse
Ta = 25°C
Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2)
1
0.001
0.01
0.1
1
Pulse width
10
100
1000
tw (s)
Safe operating area
10
10 ms*
1 ms* 100 μs*
10 μs*
IC max (Continuous)
1
100 ms*
DC operation
Ta = 25°C
0.1
0.01
*: Single nonrepetitive pulse
Ta = 25°C
Note that the curves for 10ms,
100 ms, 10 s and DC operation
will be different when the device
aren’t mounted on an FR4 board
(glass epoxy, 1.6 mm thick, Cu
area: 645 mm2).
These characteristic curves must
be derated linearly with increase
in temperature.
10 s*
VCEO max
Collector current IC
(A)
IC max (Pulse)*
0.001
0.1
1
10
100
Collector-emitter voltage VCE (V)
4
2009-07-23
TPC6504
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2009-07-23