CORCOM Product Guide For UL544 Health Care Equipment EAH, EBH Series UL Recognized CSA Certified VDE Approved EAH1/EBH1 EAH Series Specifications This is a new generation of compact medical RFI filters with an IEC socket. A new design in internal structure and manufacturing process makes this series cost effective. This health care series supersedes the H series by providing superior differential mode performance while still maintaining a maximum leakage current of 2 micro amps. Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): EBH Series Operating frequency: 50/60 Hz Also a compact medical RFI filter with IEC socket, the EBH series is a cost effective alternative to the H series. Electrically the EBH provides enhanced differential mode performance compared to both the EAH and the H series. These filters provide RFI common and differential mode performance while still allowing medical equipment to meet UL leakage current specifications for medical and dental equipment. Rated voltage (max.): 250 VAC Additional information on UL544 specification is listed in Appendix C. Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter which may disqualify this line cord from use in patient care applications. 2 µA 5 µA line-to-ground line-to-line 1500 VAC 1450 VDC Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz Rating .01 .05 .1 .15 .5 1 5 EAH Models 01A 8 03A 06A 10A EBH Models 01A 8 03A 06A 10A - 10 30 21 5 - 29 10 5 1 32 15 6 5 42 25 19 9 45 27 21 12 32 30 24 12 30 27 20 12 19 22 15 12 21 5 - 29 10 5 - 32 15 8 3 42 25 17 8 45 27 20 12 32 30 24 12 25 27 23 12 19 22 18 12 Line-to-line in 50 ohm circuit Electrical Schematic LINE LOAD Resistor location for reference only. Current Rating EAH Models 01A 3A 06A 10A Current Rating EBH Models All Ratings 1 Frequency-MHz 10 5 1.5 30 5 4 2 1 13 6 5 5 25 28 27 27 .15 .5 1 10 28 20 19 15 32 27 25 22 Frequency-MHz 1 5 10 18 30 31 30 31 24 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com 575 0.01 For UL544 Health Care Equipment (Continued) EAH, EBH Series Case Style Case Dimensions EAH1/EBH1 Part No. A (max) B (max) C (max) EAH1 2.15 54.61 2.15 54.61 1.12 28.45 1.12 28.45 .90 22.86 .90 22.86 B EBH1 A C 1.575 40.01 1.575 40.01 E (max) 1.98 50.29 1.98 50.29 Part Numbers D E Typical dimensions: Terminals: .250 [6.35] (5) Slot: .07 x .16 [1.8 x 4.1] D ±.010 ±.25 RFI Power Line Filters .14 9.96 CORCOM Product Guide Holes: .07 [1.8] Dia.(2) Mounting Holes: .132 [3.35] Dia. (2) with .236 Dia. x 90˚ countersunk for #4 Flathead Screw 01EAH1 03EAH1 06EAH1 10EAH1 Line Cord No. Insulating Boot No. 01EBH1 03EBH1 06EBH1 10EBH1 GA400 FA601 Recommended Panel Cutouts .820 20.8 .900 22.9 .140 Dia. (2) 3.56 1.14 29.96 1.575 40.01 .12 R 3.0 Panel Cutoutmounting (Front mount) Panel cutout for front .140 Dia. (2) 3.56 1.200 30.48 1.575 40.01 .234 R 5.94 Panel cutout for back mounting Tolerance ±.005 [0.13] .820 20.8 .900 22.9 .140 Dia. (2) 3.56 .12 R 3.0 1.200 30.48 1.575 40.01 .140 Dia. (2) 3.56 .234 R 5.94 Panel Cutout (Back mount) Panel cutout for back mounting Tolerance ±.005 [0.13] r front mounting 25 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com