CORCOM Product Guide RFI Filter for Power Factor Corrected Power Supplies U Series UL Recognized CSA Certified VDE Approved 6EU1 6EUP U Series Specifications The U series is designed to meet the RFI needs created by power factor corrected power supplies. This high performance filter offers a high impedance circuit to mismatch the power supply’s impedance characteristics. The economical design allows superior performance at a reasonable price. Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: The PC board mountable version has a low profile case which adapts well to most modular power converter applications. Rated voltage (max.): 250 VAC Rated current: 6.5 amps All models meet low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 and UL2601 non-patient medical equipment. .30 mA .50 mA 2250 VDC 1450 VDC 50/60 Hz Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .05 .1 Frequency-MHz .15 .5 1 5 10 30 6A 4 30 40 70 65 50 70 70 Line-to-line in 50 ohm circuit Electrical Schematic LINE LOAD Current Rating .05 .1 Frequency-MHz .15 .5 1 5 10 30 6A 10 35 45 65 55 70 70 70 Resistor location for reference only. 96 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide RFI Filter for Power Factor Corrected Power Supplies (Continued) U Series RFI Power Line Filters Case Styles Case Dimensions 6EU1 A (max) B (max) C (max) 6EUP 4.70 119.4 2.51 63.8 1.22 31.0 6EU1 4.95 125.73 2.27 57.66 1.80 45.72 Part No. B D ± .015 ± .38 — E (max) — 4.060 4.47 103.12 113.54 Part Numbers C 6EUP 6EU1 D E A Typical dimensions: Terminals: .250 [6.35] (5) Slot: .07 x .16 [1.8 x 4.1] Holes: .07 [1.8] Dia.(4) Mounting holes: .188 [4.78] Dia. (2) Recommended PC Board Layout LINE 6EUP LOAD .157 Dia. (3) .075 Dia. (6) .26 6.60 1.50 38.1 .52 13.21 .75 19.05 1.50 38.1 2.99 75.95 2.10 53.34 B .79 20.07 6-32 insert (3) .14 3.56 ground (2) .39 9.91 C A 97