CORCOM Product Guide RFI Power Line Filters for Switching Power Supply Noise Suppression EP/VP Series EP7/VP7 UL Recognized CSA Certified VDE Approved EP1/VP1 EP3/VP3 EP/VP Series Specifications The EP/VP series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA. These filters provide high insertion loss for both lineto-ground and line-to-line emissions throughout the frequency range. They are particularly well suited for equipment to better meet both stringent emissions specifications (such as CISPR 22, A-level and FCC Part 15J, Class B) and the EP models meet very low leakage current requirements. Tyco Electronics Corcom Products has extended the EP Series of Power Line Filters by adding a 7 Amp and 12 Amp versions to the existing 3, 6, 10, and 20 Amp product offering. The new filters offer higher performance in a smaller package at a lower price than the existing 6 Amp and 10 Amp versions. The smaller package size and comparable performance is a better match to Schaffner's FN 2070 Series. The new filters are RoHS compliant. Electrical Schematic LINE LOAD Tapped insert: No. 6-32 x 1/4 (2)-EP7 No. M-3 x .5 (2)-EP7M Resistor location for reference only. D B A E RecommendedC Panel Cutout .235 R 5.96 .157 Dia. (2) 3.98 .910 23.11 1.295 32.89 1.575 40.01 Panel Cutout (back mount) Maximum leakage current,each line-to-ground VP Models @ 120 VAC 60 Hz: .73mA @ 250 VAC 50 Hz: 1.27mA Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): EP Models .21mA .36mA 2250 VDC 1450 VDC 50/60 Hz 250 VAC Rated current: 03EP 3A 06EP 6A 7EP 7A 10EP 12EP 20EP/VP 10A 12A 20A Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating EP 3A 6A,10A 7A 12A 20A VP 20A Frequency–MHz .5 1 5 .01 .05 .15 1 1 15 12 3 10 10 28 7 6 58 58 63 52 28 65 65 75 68 50 65 65 78 70 55 3 2 42 60 65 10 30 66 66 75 70 60 60 60 75 70 55 25 25 55 45 55 65 55 55 20 30 58 35 65 65 58 58 35 50 45 58 58 58 Line-to-line in 50 ohm circuit Current Frequency–MHz 1 5 10 Rating .01 .15 .5 EP 65 65 36 65 65 3A 1 6A,10A 1 30 65 65 65 65 7A 10 43 55 65 68 70 12A 11 7 13 70 70 70 8 25 60 65 65 58 20A VP 25 60 65 65 58 8 20A Tolerance ±.005 [0.13] 56 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide RFI Power Line Filters for Switching Power Supply Noise Suppression (Continued) EP/VP Series RFI Power Line Filters Case Styles 20EP/VP6 EP1/VP1 (1-15 Amp version) B B D E A D E A C C Torque: 18 ± 2 in.lb Terminals: No. 8-32 (5) 20EP1/VP1 Case Dimensions B D E A Typical dimensions: Holes: .07 [1.8] Dia.(4) Terminals: .250 [6.35] (5) Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1] EP3 Brown B Blue Blue A D E Typical dimensions: Wire leads: 4.0 [101.6] Min. Green/ Yellow C Mounting Holes: .188 [4.78] Dia.(2) EP7 & EP7M (with metric insert) Tapped insert: B (max) C (max) ± .015 D E (max) 3.85 3EP1 97.8 2.56 3EP3 65.0 3EP7, 3EP7M 3.21 81.5 6.62 6EP1 168.1 5.33 6EP3 135.4 4.79 7EP1 121.7 3.50 7EP3 88.9 6.62 10EP1 168.1 5.35 10EP3 135.9 4.97 12EP1 126.2 3.624 12EP3 92.05 20EP1, 20VP1 4.95 125.7 20EP6, 20VP6 5.09 127.3 2.07 52.6 2.07 52.6 2.25 57.2 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.25 57.2 2.25 57.15 2.27 57.7 2.25 57.2 1.78 45.2 1.78 45.2 1.78 45.2 2.28 57.9 2.28 57.9 1.53 38.9 1.53 38.6 2.78 70.6 2.78 70.6 1.78 45.2 1.78 45.2 1.8 45.7 1.78 45.2 2.938 74.63 2.938 74.63 1.575 40.01 5.625 142.88 5.625 142.88 3.947 100.25 3.947 100.25 5.625 142.88 5.625 142.88 4.063 103.20 4.063 103.20 4.063 103.2 4.063 103.2 ±.38 C Brown A (max) Part No. No. 6-32 x 1/4 (2)-EP7 No. M-3 x .5 (2)-EP7M 3.35 85.1 3.35 85.1 0.63 † 12.1 6.03 † 153.2 6.03 153.2 4.33 109.98 4.33 109.98 6.03 153.2 6.03 153.2 4.46 113.28 4.46 113.28 4.47 113.5 4.46 129.3 † ±.02 [±.5] D B A Part Numbers E C Typical dimensions: Terminals: .250 [6.35] (3) Holes: .07 [1.8] Dia.(2) .235 R 5.96 .157 Dia. (2) 3.98 3EP1 3EP3 3EP7 3EP7M Line Cord No. 6EP1 6EP3 7EP1 7EP3 GA400 10EP1 10EP3 12EP1 12EP3 20EP1 20EP6 20VP1 20VP6 71/2 foot, 3-conductor line cord. .910 23.11 Catalog 1654001 Revised 05-07 Dimensions are in inches and 1.295 millimeters unless otherwise 32.89 specified. Values in italics are metric equivalents.1.575 40.01 Dimensions are shown for reference purposes only. Specifications subject to change. 57 USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com