U3 SERIES DC/DC MODULES Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The U3 Family of high efficiency DC/DC converters offer power levels of up to 3 Watt, which exceeds that of other sub-bricks with the same package, while also providing Ultra-Wide Input Voltage Range. With a 4:1 input voltage range and single & multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input filter, continuous short circuit protection and regulated outputs. The fully enclosed, encapsulated construction facilitates maximum power delivered with the highest efficiency of up to 80%. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Specifications & Features Summary • Regulated Outputs • 5-sided metal shield High Isolation versions • -25°C to +71°C ambient operation • 200KHz Switching Frequency • Continuous Short-circuit protection • up to 3KV, 10MΩ input-to-output isolation • No airflow or heatsink required • Voltage Accuracy ± 2% • Pi Input Filter • 4:1 Input Range • THROUGH-HOLE PACKAGES ONLY Model Num U3-12S5 U3-12S12 U3-12S15 U3-12D5 U3-12D12 U3-12D15 U3-12S3.3 U3-48S5 U3-48S12 U3-48S15 U3-48D5 U3-48D12 U3-48D15 U3-48S3.3 VIn 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC VOut 5.0 VDC 12.0 VDC 15.0 VDC ±5.0 VDC ±12.0 VDC ±15.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±5.0 VDC ±12.0 VDC ±15.0 VDC 3.3 VDC IOut 600.0 mA 250.0 mA 200.0 mA ±300.0 mA ±125.0 mA ±100.0 mA 600.0 mA 600.0 mA 250.0 mA 200.0 mA ±300.0 mA ±125.0 mA ±100.0 mA 600.0 mA INo Load 15.0 mA 15.0 mA 15.0 mA 25.0 mA 25.0 mA 25.0 mA 15.0 mA 7.5 mA 7.5 mA 7.5 mA 12.0 mA 12.0 mA 12.0 mA 7.5 mA IFull Load 174 mA 165 mA 165 mA 179 mA 174 mA 174 mA 117 mA 87 mA 78 mA 78 mA 88 mA 87 mA 87 mA 58 mA Approval Pending Eff 72% 76% 76% 70% 72% 72% 70% 72% 80% 80% 71% 72% 72% 70% SPECIFICATIONS Case T T T T T T T T T T T T T T Input Specifications Input Voltage Range 24V--------9-36V 48V--------18-72V Input Filter Output Specifications Voltage Accuracy Voltage Balance(Dual) Temperature Coefficient Ripple and Noise, 20MHz BW, Single & ±5Vo Dual Short Circuit Protection Line Regulation, Single/Dual1 Load Regulation, Single2 Dual3 Mechanical Outline and Pinouts for U3 Family DC/DC Converters Pi Type ±2.0% max. ±1.0% / max. ±0.05% / oC 100mV p-p max. 1% p-p max. Continuous ±0.5% ±0.5% ±1.0% Efficiency Isolation Resistance Switching Frequency Operating Temperature Range Case Temperature (Plastic case) (Copper case) Cooling Storage Temperature Range Dimensions Isolation Voltage 500VDC (Standard Models) 1,500VDC min (Add suffix “HM”) 3K VDC min4 (Add Suffix “H”) Case Material Standard Models Suffix "HM" Models Notes 1. 2. 3. 4. See Table 109 ohms 100KHz, min -25oC to +71oC 95oC max. 100oC max. Free-Air Convection -40oC to +100oC 1.25X0.8X0.4 Inches (31.8X20.3X10.2mm) Suffix “HM” Models Suffix "M" Models Non-Conductive Black Plastic Black Coated Copper with NonConductive Base Measured From High Line to Low Line Measured From Full Load to 10% Load Measured From Full Load to 1/4 Load Non-Conductive Black Plastic Only Typical at Ta= +25 ºC under nominal input voltages of 24V and 48VDC, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. • • Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-781-551-5500 Fax: 1-781-551-5555 Rev. B