uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 • • • • • • • No Frequency Compensation Required Low Power Consumption Short-Circuit Protection Offset-Voltage Null Capability Wide Common-Mode and Differential Voltage Ranges No Latch-Up Designed to Be Interchangeable With Fairchild µA747C and µA747M D, J, N, OR W PACKAGE (TOP VIEW) IN – IN + OFFSET 1N2 VCC – OFFSET 2N2 IN + IN – description OFFSET 1N2 NC VCC – NC OFFSET 2N2 3 12 4 11 5 10 6 9 7 8 OFFSET 1N1 1 VCC +† OUT NC OUT 2 VCC +† OFFSET 2N1 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 OUT NC NC NC OUT IN + IN – NC OFFSET 2N1 2 V CC +† The uA747C is characterized for operation from 0°C to 70°C; the uA747M is characterized for operation over the full military temperature range of – 55°C to 125°C. symbol (each amplifier) IN – 13 IN + IN – NC OFFSET 1N1 1 V CC +† The high common-mode input voltage range and the absence of latch-up make this amplifier ideal for voltage-follower applications. The device is short-circuit protected and the internal frequency compensation ensures stability without external components. A low-value potentiometer may be connected between the offset null inputs to null out the offset voltage as shown in Figure 2. IN+ 14 2 uA747m . . . FK PACKAGE (TOP VIEW) The uA747 is a dual general-purpose operational amplifier featuring offset-voltage null capability. Each half is electrically similar to uA741. ÏÏÏ ÏÏÏ ÏÏÏ ÏÏÏ 1 NC – No internal connection + † The two positive supply terminals (1 VCC + and 2 VCC +) are connected together internally. OUT – OFFSET N1 OFFSET N2 AVAILABLE OPTIONS PACKAGE TA 0°C to 70°C –55°C to 125°C VIO Max AT 25°C 14-PIN 20-PIN SMALL OUTLINE (D) CERAMIC DIP (J) PLASTIC DIP (N) FLAT PACK (W) CHIP CARRIER (FK) 6 mV uA747CD — uA747CN — — 5 mV — uA747MJ — uA747MW uA747MFK The D package is available taped and reeled. Add the suffix R to the device type, (i.e., uA747CDR). Copyright 1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 schematic (each amplifier) VCC + IN – OUT IN + OFFSET N2 OFFSET N1 VCC – absolute maximum ratings over operating free-air temperature range (unless otherwise noted) uA747M UNIT Supply voltage, VCC + (see Note 1) uA747C 18 22 V Supply voltage, VCC – (see Note 1) – 18 – 22 V Differential input voltage (see Note 2) ± 30 ± 30 V Input voltage any input (see Notes 1 and 3) ± 15 ± 15 V Voltage between any offset null terminal (N1/N2) and VCC – ± 0.5 ± 0.5 V Duration of output short circuit (see Note 4) unlimited Continuous total dissipation unlimited See Dissipation Rating Table Operating free-air temperature range Storage temperature range 0 to 70 – 55 to 125 °C – 65 to 150 – 65 to 150 °C Case temperature for 60 seconds FK package 260 °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 °C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or N package NOTES: 1. 2. 3. 4. °C 260 All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC –. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output may be shorted to ground or either power supply. For the uA747M only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature. DISSIPATION RATING TABLE 2 PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR D 800 mW 7.6 mW/°C DERATE ABOVE TA 45°C TA = 70°C POWER RATING TA = 125°C POWER RATING 608 mW — FK 800 mW 11.0 mW/°C 77°C 800 mW 275 mW 275 mW J 800 mW 11.0 mW/°C 77°C 800 mW N 800 mW 9.2 mW/°C 63°C 736 mW — W 800 mW 8.0 mW/°C 50°C 640 mW 200 mW POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 electrical characteristics at specified free-air temperature, VCC ± = ±15 V PARAMETER VIO Input offset voltage ∆VIO(adj) Offset voltage adjust range IIO Input offset current IIB Input bias current VICR VO(PP) AVD TA‡ TEST CONDITIONS† uA747C MIN TYP 25°C VO = 0 1 Full range 25°C ±15 25°C 20 25°C 80 25°C ±12 ±12 RL= 10 kΩ 25°C 24 Maximum peak-to-peak RL ≥ 10 kΩ Full range 24 output voltage swing RL= 2 kΩ 25°C 20 RL ≥ 2 kΩ Full range 20 Large-signal differential RL ≥ 2 kΩ, 25°C 25 voltage amplification VO = ± 10 V Full range 15 25°C 0.3 ri Input resistance ro Output resistance Ci Input capacitance CMRR Common-mode rejection ratio VIC = VICR 25°C 70 Full range 70 kSVS Supply-voltage sensitivity (∆VIO / ∆VCC) VCC = ± 9 V to ± 15 V 25°C Full range IOS Short-circuit output current ICC Supply y current (each amplifier) No load 1 5 6 ±15 200 20 80 PD Power dissipation (each amplifier) No load load, 200 500 1500 ±12 ±13 24 20 nA nA 28 24 26 mV V ±12 28 UNIT mV 500 500 ±13 V 26 20 200 50 200 V/mV 25 2 0.3* 2 MΩ 25°C 75 75 Ω 25°C 1.4 1.4 pF 90 70 90 dB 70 30 150 30 150 150 ± 25 ± 40 ± 25 ± 40 25°C 1.7 2.8 1.7 2.8 25°C 3.3 50 Full range µV/V 150 25°C Full range VO = 0 MAX 800 Full range See Note 5 6 TYP 300 Full range input voltage range MIN 7.5 Full range Common-mode uA747M MAX 3.3 85 50 100 85 100 mA mA mW Vo1/Vo2 Channel separation 25°C 120 120 0 dB † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. ‡ Full range for uA747C is 0°C to 70°C and for uA747M is – 55°C to 125°C. *On products compliant to MIL-STD-883, Class B, this parameter is not production tested. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback. operating characteristics, VCC ± = ± 15 V, TA = 25°C PARAMETER tr SR Rise time TEST CONDITIONS MIN TYP 0.3 Overshoot factor VI = 20 mV, mV RL = 2 kΩ kΩ, CL = 100 pF, pF See Figure 1 5% Slew rate at unity gain VI = 10 mV, RL = 2 kΩ, CL = 100 pF, See Figure 1 0.5 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MAX UNIT µs V/µs 3 uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 PARAMETER MEASUREMENT INFORMATION VI Ï – + Input 0V INPUT VOLTAGE WAVEFORM RL = 2 kΩ CL = 100 pF TEST CIRCUIT Figure 1. Rise Time, Overshoot, and Slew Rate APPLICATION INFORMATION IN – – IN + + OUT OFFSET N2 OFFSET N1 10 kΩ To VCC – Figure 2. Input Offset Voltage Null Circuit 4 POST OFFICE BOX 655303 OUT • DALLAS, TEXAS 75265 uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 TYPICAL CHARACTERISTICS† INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE 100 VCC ± = ± 15 V IIIO IO – Input Offset Current – nA 90 80 70 60 uA747C 50 40 30 20 10 0 – 60 – 40 – 20 0 20 40 60 80 100 120 140 TA – Free-Air Temperature – C Figure 3 INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE 400 VCC ± = ± 15 V IIB I IB– Input Bias Current – nA 350 300 250 uA747C 200 150 100 50 0 – 60 – 40 – 20 0 20 40 60 80 100 120 140 TA – Free-Air Temperature – C Figure 4 † Data at high and low temperatures are applicable only within the rated operating free-air temperature range of the particular devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 TYPICAL CHARACTERISTICS MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VCC VCC – Maximum Peak-to-Peak Output Voltage – V 28 VCC ± = ± 15 V TA = 25°C 26 24 22 20 18 16 14 ÁÁ ÁÁ ÁÁ 12 10 8 0.1 0.2 0.4 0.7 1 2 4 RL – Load Resistance – kΩ 7 10 VCC – Maximum Peak-to-Peak Output Voltage – V VO(PP) MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ 40 VCC ± = ± 15 V RL = 10 kΩ TA = 25°C 36 32 28 24 20 16 12 ÁÁ ÁÁ ÁÁ 8 4 0 100 1k Figure 5 OPEN-LOOP LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY 107 RL = 2 kΩ TA = 25°C AAVD VD – Differential Voltage Amplification AAVD VD – Differential Voltage Amplification V/mV 400 200 100 40 20 VCC ± = ± 15 V RL = 2 kΩ 106 TA = 25°C 105 10 4 103 102 ÁÁ ÁÁ ÁÁ 101 1 10 – 1 10 0 2 4 6 8 10 12 14 16 |VCC ±| – Supply Voltage – V 18 20 1 10 Figure 7 6 1M Figure 6 OPEN-LOOP LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE ÁÁ ÁÁ 10 k 100 k f – Frequency – Hz 100 1 k 10 k 100 k 1 M f – Frequency – Hz Figure 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 10 M 100 M uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990 TYPICAL CHARACTERISTICS COMMON-MODE REJECTION RATIO vs FREQUENCY OUTPUT VOLTAGE vs ELAPSED TIME 28 VCC ± = ± 15 V RS = 50 Ω TA = 25°C 90 24 VO VO – Output Voltage – mV 80 70 60 50 ÁÁ ÁÁ 40 30 20 20 90% 16 12 VCC ± = ± 15 V RL = 2 kΩ CL = 100 pF TA = 25°C 8 4 10% ÎÎ 0 10 0 1 10 100 1 k 10 k 100 k 1 M f – Frequency – Hz –4 10 M 100 M ÎÎÎÎÎ tr 0 0.5 Figure 9 1 1.5 t – Time – µs 2 2.5 Figure 10 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 8 VCC ± = ± 15 V RL = 2 kΩ CL = 100 pF TA = 25°C 6 Input and Output Voltages – V CMRR – Common-Mode Rejection Ratio – dB 100 4 Output 2 0 Input –2 –4 –6 –8 0 10 20 30 40 50 t – Time – µs 60 70 80 90 Figure 11 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated