TI UA709C

uA709C, uA709M, uA709AM
GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS096 – D942, FEBRUARY 1971 – REVISED MAY 1988
•
•
•
Common-Mode Input Range . . . ± 10 V
Typical
Designed to Be Interchangeable With
Fairchild µA709A, µA709, and µA709C
Maximum Peak-to-Peak Output Voltage
Swing . . . 28-V Typical With 15-V Supplies
uA709AM, uA709M . . . J OR W PACKAGE
(TOP VIEW)
NC
NC
FREQ COMP B
IN –
IN +
VCC –
NC
description
These circuits are general-purpose operational
amplifiers,
each
having
high-impedance
differential inputs and a low-impedance output.
Component matching, inherent with silicon
monolithic
circuit-fabrication
techniques,
produces an amplifier with low-drift and low-offset
characteristics. Provisions are incorporated within
the circuit whereby external components may be
used to compensate the amplifier for stable
operation under various feedback or load
conditions. These amplifiers are particularly
useful for applications requiring transfer or
generation of linear or nonlinear functions.
1
14
2
13
3
12
4
11
5
10
6
9
7
8
NC
NC
FREQ COMP A
VCC +
OUT
OUT FREQ COMP
NC
uA709AM, uA709M . . . JG PACKAGE
uA709C . . . D, JG, OR P PACKAGE
(TOP VIEW)
FREQ COMP B
IN –
IN +
VCC –
1
8
2
7
3
6
4
5
FREQ COMP A
VCC +
OUT
OUT FREQ COMP
uA709AM, uA709M . . . U FLAT PACKAGE
(TOP VIEW)
The uA709A circuit features improved offset
characteristics,
reduced
input-current
requirements, and lower power dissipation when
compared to the uA709 circuit. In addition,
maximum values of the average temperature
coefficients of offset voltage and current are
specified for the uA709A.
NC
FREQ COMP B
IN –
IN +
VCC
1
10
2
9
3
8
4
7
5
6
NC
FREQ COMP A
VCC +
OUT
OUT FREQ COMP
NC – No internal connection
The uA709C is characterized for operation from
0°C to 70°C. The uA709AM and uA709M are
characterized for operation over the full military
temperature range of – 55°C to 125°C.
symbol
OUT FREQ COMP
IN +
+
IN –
–
OUT
FREQ FREQ
COMP COMP
A
B
AVAILABLE OPTIONS
TA
VIO max
AT 25°C
0°C
to
70°C
7.5 mV
– 55°C
to
125°C
PACKAGE
SMALL OUTLINE
(D)
CERAMIC
(J)
CERAMIC DIP
(JG)
PLASTIC DIP
(P)
FLAT PACK
(U)
FLAT PACK
(W)
uA709CD
—
uA709CJG
uA709CP
—
—
uA709MJ
uA709MJG
uA709MU
uA709MW
uA709AMJ
uA709AMJG
uA709AMU
uA709AMW
5 mV
2 mV
—
—
The D package is available taped and reeled. Add the suffix R to the device type when ordering, (e.g., uA709CDR).
Copyright  1988, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
uA709C, uA709M, uA709AM
GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS096 – D942, FEBRUARY 1971 – REVISED MAY 1988
schematic
VCC +
10 kΩ
20 kΩ
10 kΩ
A
FREQ
COMP
25 kΩ
B
25 kΩ
1 kΩ
OUT
3 kΩ
30 kΩ
3 kΩ
10 kΩ
3.6 kΩ
IN –
OUT FREQ COMP
IN +
18 kΩ
10 kΩ
2.4 kΩ
75 kΩ
VCC –
Component values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
uA709C
A709C
uA709M
uA709AM
UNIT
Supply voltage, VCC + (see Note 1)
18
18
V
Supply voltage, VCC – (see Note 1)
– 18
– 18
V
Differential input voltage (see Note 2)
Input voltage (either input, see Notes 1 and 3)
Duration of output short circuit (see Note 4)
Continuous total power dissipation
±5
±5
V
± 10
± 10
V
5
5
s
See Dissipation Rating Table
Operating free-air temperature range
Storage temperature range
0 to 70
– 55 to 125
°C
– 65 to 150
– 65 to 150
°C
300
°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
J, JG, U, or W package
300
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
D or P package
260
NOTES: 1.
2.
3.
4.
2
All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC –.
Differential voltages are at the noninverting input terminal with respect to the inverting input terminal.
The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 10 V, whichever is less.
The output may be shorted to ground or either power supply.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
°C
uA709C, uA709M, uA709AM
GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS096 – D942, FEBRUARY 1971 – REVISED MAY 1988
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING
FACTOR
D
300 mW
N/A
DERATE
ABOVE TA
N/A
J (uA709_M)
300 mW
11.0 mW/°C
123°C
JG (uA709_M)
300 mW
8.4 mW/°C
114°C
300 mW
210 mW
JG (uA709C)
300 mW
N/A
N/A
300 mW
N/A
P
300 mW
N/A
N/A
300 mW
N/A
U
300 mW
5.4 mW/°C
94°C
300 mW
135 mW
W
300 mW
8.0 mW/°C
113°C
300 mW
200 mW
POST OFFICE BOX 655303
TA = 70°C
POWER RATING
300 mW
N/A
300 mW
275 mW
• DALLAS, TEXAS 75265
TA = 125°C
POWER RATING
3
uA709M, uA709AM
GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS096 – D942, FEBRUARY 1971 – REVISED MAY 1988
electrical characteristics at specified free-air temperature, VCC ± = ± 9 V to ± 15 V (unless otherwise
noted)
PARAMETER
TA‡
TEST CONDITIONS†
uA709AMC
TYP§
MAX
MIN
25°C
0.6
MIN
2
uA709M
TYP§
1
VIO
Input offset voltage
VO = 0
0,
RS ≤ 10 kΩ
Full range
Average temperature
A
t
t
coefficient of input
offset voltage
VO = 0
0,
RS = 50 Ω
Full range
18
1.8
10
3
αVIO
VO = 0
0,
RS = 10 kΩ
Full range
48
4.8
25
6
Input offset current
VO = 0
IIO
3
25°C
10
50
50
200
40
250
100
500
125°C
3.5
50
20
200
– 55°C to
25°C
0 45
0.45
28
2.8
25°C to
125°C
0 08
0.08
05
0.5
25°C
0.1
0.2
0.2
0.5
– 55°C
0.3
0.6
0.5
1.5
IIB
Input bias current
VO = 0
VICR
Common-mode
input voltage range
VCC ± = ± 15 V
25°C
±8
Full range
±8
VCC ± = ± 15 V
V, RL ≥ 10 kΩ
25°C
24
VO(PP)
Maximum peak-to-peak
output voltage swing
Full range
24
25°C
20
Full range
20
VCC ± = ± 15 V, RL = 2 kΩ
VCC ± = ± 15 V, RL ≥ 2 kΩ
VCC ± = ± 15 V, RL ≥ 2 kΩ,
VO = ± 10 V
25°C
± 10
±8
± 10
28
24
28
24
26
20
20
45
45
ri
Input resistance
ro
Output resistance
CMRR
Common-mode
rejection ratio
VIC = VICRmin
kSVS
Power supplyy sensitivityy
(∆VIO / ∆VCC)
VCC = ± 9 V to ± 15 V
2.5
3.6
Supply current
VCC ± = ± 15 V
V, No load
load,
VO = 0
25°C
ICC
– 55°C
2.7
4.5
125°C
2.1
3
VCC ± = ± 15 V
V, No load
load,
VO = 0
25°C
75
108
– 55°C
81
135
125°C
63
90
25
25°C
350
750
150
400
– 55°C
85
185
40
100
25°C
70
25
150
25°C
80
Full range
80
25°C
V
26
Full range
See Note 5
70
Ω
150
110
70
90
dB
70
40
Full range
100
25
100
150
150
2.6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V/mV
kΩ
µV/V
5.5
mA
78
165
† All characteristics are specified under open-loop with zero common-mode input voltage unless otherwise specified.
‡ Full range for uA709C is 0°C to 70°C. Full range for uA709AM and uA709M is – 55°C to 125°C.
§ All typical values are at VCC ± = ± 15 V.
NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback.
4
µA
V
±8
Large-signal
g
g
differential
voltage amplification
VO = 0,
nA
nA/°C
AVD
Total power dissipation
mV
6
– 55°C
VO = 0
PD
5
UNIT
µV/°C
A
t
t
Average
temperature
coefficient of input
offset voltage
αVIO
MAX
mW
uA709C, uA709M, uA709AM
GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS096 – D942, FEBRUARY 1971 – REVISED MAY 1988
electrical characteristics at specified free-air temperature (unless otherwise noted VCC ± = ± 15 V)
TA‡
TEST CONDITIONS†
PARAMETER
Input offset voltage
VCC ± = ± 9 V to ± 15 V,
V VO = 0
IIO
Input offset current
VCC ± = ± 9 V to ± 15 V,
V VO = 0
Full range
IIB
Input bias current
VCC ± = ± 9 V to ± 15 V,
V VO = 0
Full range
VICR
Common-mode input voltage range
± 10
24
28
25°C
Full range
25°C
ri
Input resistance
ro
Output resistance
CMRR
Common-mode rejection ratio
Full range
VO = 0,
VIC = VICR min
See Note 5
20
UNIT
mV
nA
µA
V
24
V
26
20
15
45
V/mV
12
50
250
kΩ
35
25°C
25°C
1.5
2
±8
Full range
VO = ± 10 V
0.3
25°C
Full range
500
750
25°C
25°C
RL ≤ 2 kΩ
kΩ,
voltage amplification
7.5
100
25°C
RL = 2 kΩ
Large-signal differential
2
10
25°C
RL ≥ 2 kΩ
AVD
MAX
Full range
RL ≥ 10 kΩ
Maximum peak-to-peak
output voltage swing
TYP
25°C
VIO
VO(PP)
uA709C
MIN
65
150
Ω
90
dB
Supply voltage sensitivity
VCC = ± 9 V to ± 15 V
25°C
25
200
µV/V
PD
Total power dissipation
VO = 0,
No load
25°C
80
200
mW
† All characteristics are specified under open-loop operation with zero volts common-mode voltage unless otherwise specified.
‡ Full range for uA709C is 0°C to 70°C. Full range for uA709AM and uA709M is – 55°C to 125°C.
NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback.
kSVS
operating characteristics, VCC ± = ± 9 V to ± 15 V, TA = 25°C
uA709C
uA709M
A709M
uA709AM
A709AM
TEST CONDITIONS†
PARAMETER
MIN
tr
Rise time
Overshoot factor
VI = 20 mV,
mV
RL = 2 kΩ
kΩ,
See Figure 1
TYP
UNIT
MAX
CL = 0
0.3
1
CL = 100 pF
6%
30%
µs
PARAMETER MEASUREMENT INFORMATION
10 kΩ
200 pF
VI
–
Input
10 kΩ
50 kΩ
+
0V
INPUT VOLTAGE
WAVEFORM
OUT
FREQ
COMP
RL = 2 kΩ
Output
CL = 100 pF
100 pF
FREQ
COMP B
5000 pF
FREQ
COMP A
1.5 kΩ
Figure 1. Rise Time and Slew Rate Test Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated