µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 D D D D D 3-Terminal Regulators Output Current Up To 100 mA No External Components Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting D PACKAGE (TOP VIEW) OUTPUT COMMON COMMON NC 1 8 2 7 3 6 4 5 INPUT COMMON COMMON NC description/ordering information This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high-current voltage regulators. One of these regulators can deliver up to 100 mA of output current. The internal limiting and thermal-shutdown features of these regulators essentially make them immune to overload. When used as a replacement for a Zener diode-resistor combination, an effective improvement in output impedance can be obtained, together with lower bias current. NC − No internal connection LP PACKAGE (TO-92, TO-226AA) (TOP VIEW) INPUT COMMON OUTPUT PK PACKAGE (TOP VIEW) INPUT The µA78L00C and µA78L00AC series are characterized for operation over the virtual junction temperature range of 0°C to 125°C. The µA78L05AI is characterized for operation over the virtual junction temperature range of −40°C to 125°C. COMMON OUTPUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2004, Texas Instruments Incorporated !"# $% $ ! ! & ' $$ ()% $ !* $ #) #$ * ## !% POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 description/ordering information (continued) ORDERING INFORMATION TJ VO(NOM) (V) OUTPUT VOLTAGE TOLERANCE 2.6 V 5% PACKAGE† Tube of 75 µA78L02ACD 78L02A TO-226/TO-92 (LP) Bulk of 1000 µA78L02ACLP 78L02AC Tube of 75 µA78L05ACD Reel of 2500 µA78L05ACDR 78L05A Reel of 1000 µA78L05ACPK F5 Bulk of 1000 µA78L05ACLP Pack of 2000 µA78L05ACLPM Reel of 2000 µA78L05ACLPR Tube of 75 µA78L05CD Reel of 2500 µA78L05CDR 78L05C SOT-89 (PK) Tube of µA78L05CPK B5 TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L05CLP Reel of 2000 µA78L05CLPR 78L05C SOT-89 (PK) Reel of 1000 µA78L06ACPK F6 TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L06ACLP Reel of 2000 µA78L06ACLPR 78L06AC Tube of 75 µA78L08ACD 78L08A SOT-89 (PK) 5% TO-92 (LP) TO-226AA (LP) 5V SOIC (D) 6.2 V 5% SOIC (D) 5% 0°C 0 C to 125 125°C C 8V 10% 5% Reel of 2500 µA78L08ACDR 78L08A Reel of 1000 µA78L08ACPK F8 TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L08ACLP Reel of 2000 µA78L08ACLPR Tube of 75 µA78L08CD Reel of 2500 µA78L08CDR Tube of 75 µA78L09ACD Reel of 2500 µA78L09ACDR 78L09A SOT-89 (PK) Reel of 1000 µA78L09ACPK F9 TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L09ACLP Reel of 2000 µA78L09ACLPR Tube of 75 µA78L10ACD Reel of 2500 µA78L10ACDR 78L10A SOT-89 (PK) Reel of 1000 µA78L10ACPK FA TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L10ACLP Reel of 2000 µA78L10ACLPR Tube of 75 µA78L12ACD Reel of 2500 µA78L12ACDR 78L12A Reel of 1000 µA78L12ACPK FC Bulk of 1000 µA78L12ACLP Pack of 2000 µA78L12ACLPM SOIC (D) SOIC (D) 10 V 5% SOIC (D) SOT-89 (PK) 12 V 78L05AC SOT-89 (PK) SOIC (D) 9V TOP-SIDE MARKING SOIC (D) SOIC (D) 10% ORDERABLE PART NUMBER 5% TO-92 (LP) TO-226AA (LP) 78L08AC 78L08C 78L09AC 78L10AC 78L12AC Reel of 2000 µA78L12ACLPR † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 description/ordering information (continued) ORDERING INFORMATION (continued) TJ VO(NOM) (V) OUTPUT VOLTAGE TOLERANCE PACKAGE† 15 V 5% µA78L15ACD Reel of 2500 µA78L15ACDR 78L15A SOT-89 (PK) Reel of 1000 µA78L15ACPK FF TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L15ACLP Reel of 2000 µA78L15ACLPR Tube of 75 µA78L05AID Reel of 2500 µA78L05AIDR 78L15AI SOT-89 (PK) Reel of 1000 µA78L05AIPK J5 TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L05AILP Reel of 2000 µA78L05AILPR SOIC (D) −40°C −40 C to 125 125°C C 5V 5% TOP-SIDE MARKING Tube of 75 SOIC (D) 0°C 0 C to 125 125°C C ORDERABLE PART NUMBER 78L15AC 78L05AI † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. schematic INPUT 20 kΩ OUTPUT 1 kΩ to 14 kΩ 1.4 kΩ COMMON NOTE A: Resistor values shown are nominal. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 absolute maximum ratings over virtual junction temperature range (unless otherwise noted)† Input voltage, VI: µA78L02AC, µA78L05C−µA78L09C, µA78L10AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V µA78L12C, µA78L12AC, µA78L15C, µA78L15AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. package thermal data (see Note 1) SOIC (D) High K, JESD 51-7 θJC 39°C/W TO-92/TO-226AA (LP) High K, JESD 51-7 55°C/W 140°C/W SOT-89 (PK) High K, JESD 51-7 9°C/W 52°C/W PACKAGE BOARD θJA 97°C/W NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power levels slightly above or below the rated dissipation. recommended operating conditions MIN MAX 4.75 20 7 20 µA78L06C, µA78L06AC 8.5 20 µA78L08C, µA78L08AC 10.5 23 µA78L09C, µA78L09AC 11.5 24 µA78L10AC 12.5 25 µA78L12C, µA78L12AC 14.5 27 µA78L15C, µA78L15AC 17.5 µA78L02AC µA78L05C, µA78L05AC VI IO TJ 4 Input voltage Output current Operating virtual junction temperature range POST OFFICE BOX 655303 µA78L05AI • DALLAS, TEXAS 75265 V 30 100 µA78LxxC and µA78LxxAC series UNIT 0 125 −40 125 mA °C µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 electrical characteristics at specified virtual junction temperature, VI = 9 V, IO = 40 mA (unless otherwise noted) PARAMETER Input voltage regulation Ripple rejection Output voltage regulation Output noise voltage TYP 2.6 MAX 25°C 2.5 2.45 2.75 IO = 1 mA to 70 mA 0°C to 125°C 2.45 2.75 VI = 4.75 V to 20 V VI = 5 V to 20 V 25°C VI = 6 V to 20 V, IO = 1 mA to 100 mA IO = 1 mA to 40 mA f = 120 Hz 25°C 43 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Dropout voltage Bias current Bias current change MIN 0°C to 125°C VI = 4.75 V to 20 V, Output voltage µA78L02AC TJ† TEST CONDITIONS 100 16 75 51 50 6 25 30 25°C 1.7 25°C 3.6 mV mV µV V 6 5.5 2.5 0°C to 125°C V dB 12 125°C VI = 5 V to 20 V IO = 1 mA to 40 mA 2.7 20 25°C UNIT 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage TEST CONDITIONS VI = 7 V to 20 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation VI = 7 V to 20 V VI = 8 V to 20 V Ripple rejection VI = 8 V to 18 V, f = 120 Hz IO = 1 mA to 100 mA Output voltage regulation Output noise voltage IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Dropout voltage Bias current Bias current change TJ‡ MIN TYP MAX 5 MIN TYP 5 UNIT MAX 25°C 4.6 5.4 4.8 Full range 4.5 5.5 4.75 5.25 Full range 4.5 5.5 4.75 5.25 25°C 25°C 40 25°C 5.2 32 200 32 150 26 150 26 100 49 41 49 V mV dB 15 60 15 60 8 30 8 30 mV 25°C 42 42 µV 25°C 1.7 1.7 V 25°C 3.8 125°C VI = 8 V to 20 V IO = 1 mA to 40 mA µA78L05AC µA78L05AI µA78L05C Full range 6 3.8 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA ‡ Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Full range for the µA78L05AC is TJ = 0°C to 125°C, and full range for the µA78L05AI is TJ = −40°C to 125°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 electrical characteristics at specified virtual junction temperature, VI = 12 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage TEST CONDITIONS VI = 8.5 V to 20 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation VI = 8.5 V to 20 V VI = 9 V to 20 V Ripple rejection VI = 10 V to 20 V, f = 120 Hz IO = 1 mA to 100 mA Output voltage regulation Output noise voltage TYP MAX MIN TYP MAX 6.2 6.2 6.45 25°C 5.7 6.7 5.95 5.6 6.8 5.9 6.5 0°C to 125°C 5.6 6.8 5.9 6.5 25°C 25°C 39 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Bias current 35 200 35 175 29 150 29 125 48 40 48 80 16 80 9 40 9 40 25°C 46 25°C 1.7 25°C 3.9 0°C to 125°C 1.7 3.9 V mV mV µV 46 6 UNIT dB 16 125°C VI = 9 V to 20 V IO = 1 mA to 40 mA µA78L06AC MIN 0°C to 125°C Dropout voltage Bias current change µA78L06C TJ† V 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless otherwise noted) PARAMETER TEST CONDITIONS µA78L08C µA78L08AC TJ† MIN TYP MAX MIN TYP MAX 8 8 8.3 25°C 7.36 8.64 7.7 0°C to 125°C 7.2 8.8 7.6 8.4 IO = 1 mA to 70 mA 0°C to 125°C 7.2 8.8 7.6 8.4 Input voltage regulation VI = 10.5 V to 23 V VI = 11 V to 23 V 25°C Ripple rejection VI = 13 V to 23 V, f = 120 Hz IO = 1 mA to 100 mA Output voltage Output voltage regulation Output noise voltage VI = 10.5 V to 23 V, IO = 1 mA to 40 mA 25°C 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Dropout voltage Bias current Bias current change 36 200 42 175 36 150 36 125 46 37 46 V mV dB 18 80 18 80 10 40 10 40 mV 25°C 54 54 µV 25°C 1.7 1.7 V 25°C 4 125°C VI = 11 V to 23 V IO = 1 mA to 40 mA 42 UNIT 0°C to 125°C 6 4 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 electrical characteristics at specified virtual junction temperature, VI = 16 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage TEST CONDITIONS VI = 12 V to 24 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation VI = 12 V to 24 V VI = 13 V to 24 V Ripple rejection VI = 15 V to 25 V, f = 120 Hz IO = 1 mA to 100 mA Output voltage regulation Output noise voltage IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Bias current µA78L09AC MIN TYP MAX 9 TYP 9 MAX 25°C 8.3 9.7 8.6 8.1 9.9 8.55 9.45 0°C to 125°C 8.1 9.9 8.55 9.45 25°C 36 225 45 175 40 175 40 125 45 25°C 38 45 90 19 90 11 40 11 40 58 25°C 1.7 25°C 4.1 0°C to 125°C 1.7 4.1 mV mV µV 58 6 V dB 19 25°C UNIT 9.4 45 125°C VI = 13 V to 24 V IO = 1 mA to 40 mA MIN 0°C to 125°C 25°C Dropout voltage Bias current change µA78L09C TJ† V 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage TEST CONDITIONS VI = 13 V to 25 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation Ripple rejection Output voltage regulation Output noise voltage TYP MAX 10 10.4 25°C 9.6 9.5 10.5 0°C to 125°C 9.5 10.5 25°C f = 120 Hz 25°C 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Dropout voltage Bias current Bias current change MIN 0°C to 125°C VI = 13 V to 25 V VI = 14 V to 25 V VI = 15 V to 25 V, IO = 1 mA to 100 mA µA78L10AC TJ† 175 42 125 44 90 11 40 62 25°C 1.7 25°C 4.2 0°C to 125°C V mV dB 20 25°C 125°C VI = 14 V to 25 V IO = 1 mA to 40 mA 37 51 UNIT mV µV V 6 5.5 1.5 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 40 mA (unless otherwise noted) PARAMETER TJ† TEST CONDITIONS µA78L12C µA78L12AC MIN TYP MAX MIN TYP MAX 12 12 12.5 25°C 11.1 12.9 11.5 0°C to 125°C 10.8 13.2 11.4 12.6 IO = 1 mA to 70 mA 0°C to 125°C 10.8 13.2 11.4 12.6 Input voltage regulation VI = 14.5 V to 27 V VI = 16 V to 27 V 25°C Ripple rejection VI = 15 V to 25 V, f = 120 Hz IO = 1 mA to 100 mA VI = 14 V to 27 V, Output voltage Output voltage regulation Output noise voltage IO = 1 mA to 40 mA 25°C 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Dropout voltage Bias current Bias current change 36 55 250 55 250 49 200 49 200 42 42 100 22 100 13 50 13 50 25°C 70 25°C 1.7 25°C 4.3 0°C to 125°C mV mV µV 70 1.7 6.5 V dB 22 125°C VI = 16 V to 27 V IO = 1 mA to 40 mA 37 UNIT V 4.3 6.5 6 6 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage TEST CONDITIONS VI = 17.5 V to 30 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation Ripple rejection Output voltage regulation Output noise voltage TYP MAX 15 15 MAX 16.2 14.4 13.5 16.5 14.25 15.75 0°C to 125°C 13.5 16.5 14.25 15.75 VI = 20 V to 30 V f = 120 Hz 25°C 33 IO = 1 mA to 100 mA 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz 15.6 65 300 65 300 58 250 58 250 39 34 UNIT 39 V mV dB 25 150 25 150 15 75 15 75 mV 25°C 82 82 µV 25°C 1.7 1.7 V 25°C 4.6 125°C VI = 10 V to 30 V IO = 1 mA to 40 mA TYP 13.8 25°C Bias current MIN 25°C VI = 17.5 V to 30 V VI = 18.5 V to 28.5 V, µA78L15AC MIN 0°C to 125°C Dropout voltage Bias current change µA78L15C TJ† 0°C to 125°C 6.5 4.6 6.5 6 6 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 APPLICATION INFORMATION µA78Lxx VI VO 0.33 µF 0.1 µF Figure 1. Fixed-Output Regulator IN + µA78Lxx VI OUT G IL COM −VO − Figure 2. Positive Regulator in Negative Configuration (VI Must Float) Input µA78Lxx Output R1 IO 0.33 µF 0.1 µF R2 Figure 3. Adjustable-Output Regulator µA78Lxx Input 0.33 µF R1 VO(Reg) Output IO IO = (VO/R1) + IO Bias Current Figure 4. Current Regulator POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 µ SLVS010S − JANUARY 1976 − REVISED FEBRUARY 2004 APPLICATION INFORMATION 1N4001 µA78L15 20-V Input VO = 15 V 0.33 µF 0.1 µF 1N4001 0.1 µF 0.33 µF 1N4001 µA79L15 −20-V Input VO = −15 V 1N4001 Figure 5. Regulated Dual Supply operation with a load common to a voltage of opposite polarity In many cases, a regulator powers a load that is not connected to ground, but instead, is connected to a voltage source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp diode should be connected to the regulator output as shown in Figure 6. This protects the regulator from output polarity reversals during startup and short-circuit operation. µA78Lxx VI VO 1N4001 or Equivalent −VO Figure 6. Output Polarity-Reversal-Protection Circuit reverse-bias protection Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could break down and be damaged. To prevent this, a diode shunt can be employed as shown in Figure 7. VI µA78Lxx VO Figure 7. Reverse-Bias-Protection Circuit 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 25-Oct-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty UA78L02ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L02ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L02ACDR OBSOLETE SOIC D 8 TBD Call TI UA78L02ACLP ACTIVE TO-92 LP 3 TBD CU SNPB UA78L02CD OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L02CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L05ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05ACDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 1000 Lead/Ball Finish MSL Peak Temp (3) Call TI Level-NC-NC-NC UA78L05ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L05ACLPM ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L05ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L05ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN Level-NC-NC-NC TBD CU SNPB Level-1-220C-UNLIM CU SN Level-2-260C-1YEAR UA78L05ACPK ACTIVE SOT-89 PK 3 1000 UA78L05ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) UA78L05AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05AIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05AIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05AILP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L05AILPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L05AIPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L05AIPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78L05AQD OBSOLETE SOIC D 8 Call TI Call TI UA78L05AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L05CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L05CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 25-Oct-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty UA78L05CDG4 ACTIVE SOIC D 8 UA78L05CDR ACTIVE SOIC D UA78L05CDRE4 ACTIVE SOIC UA78L05CDRG4 ACTIVE UA78L05CLP ACTIVE 75 Lead/Ball Finish MSL Peak Temp (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC TBD CU SNPB Level-NC-NC-NC UA78L05CLPR ACTIVE TO-92 LP 3 2000 UA78L05CPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) UA78L05QLP OBSOLETE TO-92 LP 3 UA78L05QLPR OBSOLETE TO-92 LP UA78L06ACD OBSOLETE SOIC D UA78L06ACDR OBSOLETE SOIC CU SN Level-2-260C-1YEAR TBD Call TI Call TI 3 TBD Call TI Call TI 8 TBD Call TI Call TI D 8 TBD Call TI Call TI UA78L06ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L06ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L06ACPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L06ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78L06CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L08ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L08ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC TBD CU SNPB Level-1-220C-UNLIM CU SN Level-2-260C-1YEAR Call TI Call TI Call TI UA78L08ACPK ACTIVE SOT-89 PK 3 1000 UA78L08ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) UA78L08AILP OBSOLETE TO-92 LP 3 UA78L08AQDR OBSOLETE SOIC D 8 TBD Call TI UA78L08CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L08CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 25-Oct-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) UA78L08CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L08CPK OBSOLETE SOT-89 PK 3 TBD Call TI Call TI UA78L09ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L09ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L09ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L09ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L09ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L09ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L09ACPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L09ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78L09AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L09CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L09CLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L10ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L10ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L10ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L10ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L10ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L10ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L10ACPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L10ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78L10CD OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L10CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L10CLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L12ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L12ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L12ACLPM ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 25-Oct-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty UA78L12ACLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN Level-NC-NC-NC UA78L12ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L12ACPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L12ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR Lead/Ball Finish MSL Peak Temp (3) UA78L12AQDR OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L12AQLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI UA78L12CD OBSOLETE SOIC D 8 TBD Call TI Call TI Call TI UA78L12CLP OBSOLETE TO-92 LP 3 TBD Call TI UA78L15ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L15ACDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L15ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L15ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UA78L15ACLP ACTIVE TO-92 LP 3 1000 TBD CU SNPB Level-NC-NC-NC UA78L15ACLPR ACTIVE TO-92 LP 3 2000 TBD CU SNPB Level-NC-NC-NC UA78L15ACPK ACTIVE SOT-89 PK 3 1000 TBD CU SNPB Level-1-220C-UNLIM UA78L15ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78L15CD OBSOLETE SOIC D 8 TBD Call TI Call TI UA78L15CLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 4 PACKAGE OPTION ADDENDUM www.ti.com 25-Oct-2005 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 5 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.205 (5,21) 0.175 (4,44) 0.165 (4,19) 0.125 (3,17) DIA 0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C 0.500 (12,70) MIN 0.104 (2,65) FORMED LEAD OPTION 0.022 (0,56) 0.016 (0,41) 0.016 (0,41) 0.014 (0,35) STRAIGHT LEAD OPTION D 0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14) 1 2 3 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) 0.080 (2,03) 4040001-2 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.539 (13,70) 0.460 (11,70) 1.260 (32,00) 0.905 (23,00) 0.650 (16,50) 0.610 (15,50) 0.020 (0,50) MIN 0.098 (2,50) 0.384 (9,75) 0.335 (8,50) 0.748 (19,00) 0.217 (5,50) 0.433 (11,00) 0.335 (8,50) 0.748 (19,00) 0.689 (17,50) 0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.169 (4,30) 0.146 (3,70) DIA 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated