µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 D D D D D D D D 3-Terminal Regulators Output Current up to 500 mA No External Components Internal Thermal-Overload Protection High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation Direct Replacements for Fairchild µA78M00 Series KC PACKAGE (TOP VIEW) OUTPUT COMMON INPUT The COMMON terminal is in electrical contact with the mounting base. TO-220AB OUTPUT COMMON INPUT description This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents and also as the power-pass element in precision regulators. KTP PACKAGE (TOP VIEW) OUTPUT COMMON INPUT The COMMON terminal is in electrical contact with the mounting base. The µA78M00C series is characterized for operation over the virtual junction temperature range of 0°C to 125°C. OUTPUT INPUT COMMON Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 AVAILABLE OPTIONS PACKAGED DEVICES TJ 0°C to 125°C VO(NOM) (V) HEAT-SINK MOUNTED (KC) PLASTIC FLANGE MOUNTED (KTP) 5 µA78M05CKC µA78M05CKTP 6 µA78M06CKC µA78M06CKTP 8 µA78M08CKC µA78M08CKTP 9 µA78M09CKC µA78M09CKTP 10 µA78M10CKC µA78M10CKTP 12 µA78M12CKC µA78M12CKTP 15 µA78M15CKC µA78M15CKTP The KTP package is only available taped and reeled. Add the suffix R to the device type (e.g., µA78M05CKTPR). schematic INPUT 140 kΩ 96 Ω 0.6 Ω OUTPUT 0 to 20 kΩ 5.4 kΩ COMMON Resistor values shown are nominal. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 absolute maximum ratings over virtual junction temperature range (unless otherwise noted)† Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Package thermal impedance, θJA (see Notes 1 and 2): KC package . . . . . . . . . . . . . . . . . . . . . . . . . . . 22°C/W KTP package . . . . . . . . . . . . . . . . . . . . . . . . . 28°C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Virtual junction temperature range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can impact reliability. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VI IO TJ Input voltage MIN MAX µA78M05 7 25 µA78M06 8 25 µA78M08 10.5 25 µA78M09 11.5 26 µA78M10 12.5 28 µA78M12 14.5 30 µA78M15 17.5 30 Output current Operating virtual junction temperature POST OFFICE BOX 655303 0 • DALLAS, TEXAS 75265 UNIT V 500 mA 125 °C 3 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VI = 7 V to 20 V O t t voltage Output lt Input voltage regulation TJ = 0°C to 125°C VI = 7 V to 25 V IO = 200 mA IO = 100 mA, TJ = 0°C to 125°C IO = 300 mA VI = 8 V to 18 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Output noise voltage TYP 4.8 5 4.75 IO = 5 mA, f = 10 Hz to 100 kHz MAX 5.2 5.25 3 100 1 50 62 62 TJ = 0°C to 125°C 20 100 10 50 40 4.5 Short-circuit output current VI = 35 V VI = 8 V to 25 V, TJ = 0°C to 125°C TJ = 0°C to 125°C mV/°C µV 6 mA V 0.8 0.5 300 Peak output current mV 200 2 Bias current IO = 200 mA, IO = 5 mA to 350 mA V dB 80 –1 Dropout voltage Bias current change UNIT mV VI = 8 V to 20 V VI = 8 V to 25 V Ripple rejection Temperature coefficient of output voltage µA78M05C MIN mA mA 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) O tp t voltage oltage Output mA IO = 5 mA to 350 mA, VI = 8 V to 21 V Input voltage regulation IO = 200 mA VI = 8 V to 25 V VI = 9 V to 25 V Ripple rejection j µA78M06C TEST CONDITIONS† PARAMETER VI = 9 V to 19 V,, Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz f = 120 Hz TJ = 0°C to 125°C MIN TYP MAX 5.75 6 6.25 5.7 IO = 100 mA, TJ = 0°C to 125°C 59 IO = 300 mA 59 TJ = 0°C to 125°C Dropout voltage 6.3 5 100 1.5 50 VI = 9 V to 25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV dB 20 120 10 60 mV –1 mV/°C 45 µV 4.5 Bias current change V 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 270 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M08C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 10 10.5 5 V to 23 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 10.5 V to 25 V VI = 11 V to 25 V Ripple rejection VI = 11.5 V to 21.5 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 7.7 8 8.3 7.6 8.4 6 100 2 50 56 56 TJ = 0°C to 125°C Dropout voltage 25 160 10 80 VI = 10.5 V to 25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 52 µV 4.6 Bias current change V dB 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 250 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 16 V,IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M09C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 11 11.5 5 V to 24 V, V IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 11.5 V to 26 V VI = 12 V to 26 V Ripple rejection VI = 13 V to 23 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 8.6 9 9.4 8.5 Dropout voltage 6 100 2 50 56 56 TJ = 0°C to 125°C 9.5 25 180 10 90 VI = 11.5 V to 26 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV/°C 58 µV TJ = 0°C to 125°C V 6 0.8 0.5 250 Peak output current mV –1 4.6 Bias current change V dB 80 2 Bias current UNIT mA mA mA 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 17 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M10C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 12 12.5 5 V to 25 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 12.5 V to 28 V VI = 14 V to 28 V Ripple rejection VI = 15 V to 25 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 9.6 10 10.4 9.5 10.5 7 100 2 50 59 55 TJ = 0°C to 125°C Dropout voltage 25 200 10 100 VI = 12.5 V to 28 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 64 µV 4.7 Bias current change V dB 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 245 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M12C TEST CONDITIONS† PARAMETER MIN TYP MAX 11.5 12 12.5 UNIT O t t voltage Output lt VI = 14 14.5 5 V to 27 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 14.5 V to 30 V VI = 16 V to 30 V Ripple rejection VI = 15 V to 25 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA 25 240 10 120 Temperature coefficient of output voltage IO = 5 mA –1 mV/°C Output noise voltage f = 10 Hz to 100 kHz 75 µV TJ = 0°C to 125°C TJ = 0°C to 125°C 11.4 8 100 2 50 55 55 Dropout voltage 12.6 4.8 Bias current change VI = 14.5 V to 30 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C TJ = 0°C to 125°C mV V 6 0.8 0.5 240 mV dB 80 2 Bias current V mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M15C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 17 17.5 5 V to 30 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 17.5 V to 30 V VI = 20 V to 30 V Ripple rejection VI = 18.5 V to 28.5 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP 14.4 15 14.25 Dropout voltage 15.6 15.75 10 100 3 50 54 54 TJ = 0°C to 125°C MAX 25 300 10 150 VI = 17.5 V to 30 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 90 µV 4.8 Bias current change V dB 70 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 240 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 D D D D D D D D 3-Terminal Regulators Output Current up to 500 mA No External Components Internal Thermal-Overload Protection High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation Direct Replacements for Fairchild µA78M00 Series KC PACKAGE (TOP VIEW) OUTPUT COMMON INPUT The COMMON terminal is in electrical contact with the mounting base. TO-220AB OUTPUT COMMON INPUT description This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents and also as the power-pass element in precision regulators. KTP PACKAGE (TOP VIEW) OUTPUT COMMON INPUT The COMMON terminal is in electrical contact with the mounting base. The µA78M00C series is characterized for operation over the virtual junction temperature range of 0°C to 125°C. OUTPUT INPUT COMMON Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 AVAILABLE OPTIONS PACKAGED DEVICES TJ 0°C to 125°C VO(NOM) (V) HEAT-SINK MOUNTED (KC) PLASTIC FLANGE MOUNTED (KTP) 5 µA78M05CKC µA78M05CKTP 6 µA78M06CKC µA78M06CKTP 8 µA78M08CKC µA78M08CKTP 9 µA78M09CKC µA78M09CKTP 10 µA78M10CKC µA78M10CKTP 12 µA78M12CKC µA78M12CKTP 15 µA78M15CKC µA78M15CKTP The KTP package is only available taped and reeled. Add the suffix R to the device type (e.g., µA78M05CKTPR). schematic INPUT 140 kΩ 96 Ω 0.6 Ω OUTPUT 0 to 20 kΩ 5.4 kΩ COMMON Resistor values shown are nominal. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 absolute maximum ratings over virtual junction temperature range (unless otherwise noted)† Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Package thermal impedance, θJA (see Notes 1 and 2): KC package . . . . . . . . . . . . . . . . . . . . . . . . . . . 22°C/W KTP package . . . . . . . . . . . . . . . . . . . . . . . . . 28°C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Virtual junction temperature range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can impact reliability. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VI IO TJ Input voltage MIN MAX µA78M05 7 25 µA78M06 8 25 µA78M08 10.5 25 µA78M09 11.5 26 µA78M10 12.5 28 µA78M12 14.5 30 µA78M15 17.5 30 Output current Operating virtual junction temperature POST OFFICE BOX 655303 0 • DALLAS, TEXAS 75265 UNIT V 500 mA 125 °C 3 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VI = 7 V to 20 V O t t voltage Output lt Input voltage regulation TJ = 0°C to 125°C VI = 7 V to 25 V IO = 200 mA IO = 100 mA, TJ = 0°C to 125°C IO = 300 mA VI = 8 V to 18 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Output noise voltage TYP 4.8 5 4.75 IO = 5 mA, f = 10 Hz to 100 kHz MAX 5.2 5.25 3 100 1 50 62 62 TJ = 0°C to 125°C 20 100 10 50 40 4.5 Short-circuit output current VI = 35 V VI = 8 V to 25 V, TJ = 0°C to 125°C TJ = 0°C to 125°C mV/°C µV 6 mA V 0.8 0.5 300 Peak output current mV 200 2 Bias current IO = 200 mA, IO = 5 mA to 350 mA V dB 80 –1 Dropout voltage Bias current change UNIT mV VI = 8 V to 20 V VI = 8 V to 25 V Ripple rejection Temperature coefficient of output voltage µA78M05C MIN mA mA 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) O tp t voltage oltage Output mA IO = 5 mA to 350 mA, VI = 8 V to 21 V Input voltage regulation IO = 200 mA VI = 8 V to 25 V VI = 9 V to 25 V Ripple rejection j µA78M06C TEST CONDITIONS† PARAMETER VI = 9 V to 19 V,, Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz f = 120 Hz TJ = 0°C to 125°C MIN TYP MAX 5.75 6 6.25 5.7 IO = 100 mA, TJ = 0°C to 125°C 59 IO = 300 mA 59 TJ = 0°C to 125°C Dropout voltage 6.3 5 100 1.5 50 VI = 9 V to 25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV dB 20 120 10 60 mV –1 mV/°C 45 µV 4.5 Bias current change V 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 270 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M08C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 10 10.5 5 V to 23 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 10.5 V to 25 V VI = 11 V to 25 V Ripple rejection VI = 11.5 V to 21.5 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 7.7 8 8.3 7.6 8.4 6 100 2 50 56 56 TJ = 0°C to 125°C Dropout voltage 25 160 10 80 VI = 10.5 V to 25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 52 µV 4.6 Bias current change V dB 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 250 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 16 V,IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M09C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 11 11.5 5 V to 24 V, V IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 11.5 V to 26 V VI = 12 V to 26 V Ripple rejection VI = 13 V to 23 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 8.6 9 9.4 8.5 Dropout voltage 6 100 2 50 56 56 TJ = 0°C to 125°C 9.5 25 180 10 90 VI = 11.5 V to 26 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV/°C 58 µV TJ = 0°C to 125°C V 6 0.8 0.5 250 Peak output current mV –1 4.6 Bias current change V dB 80 2 Bias current UNIT mA mA mA 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 17 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M10C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 12 12.5 5 V to 25 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 12.5 V to 28 V VI = 14 V to 28 V Ripple rejection VI = 15 V to 25 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX 9.6 10 10.4 9.5 10.5 7 100 2 50 59 55 TJ = 0°C to 125°C Dropout voltage 25 200 10 100 VI = 12.5 V to 28 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 64 µV 4.7 Bias current change V dB 80 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 245 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M12C TEST CONDITIONS† PARAMETER MIN TYP MAX 11.5 12 12.5 UNIT O t t voltage Output lt VI = 14 14.5 5 V to 27 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 14.5 V to 30 V VI = 16 V to 30 V Ripple rejection VI = 15 V to 25 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA 25 240 10 120 Temperature coefficient of output voltage IO = 5 mA –1 mV/°C Output noise voltage f = 10 Hz to 100 kHz 75 µV TJ = 0°C to 125°C TJ = 0°C to 125°C 11.4 8 100 2 50 55 55 Dropout voltage 12.6 4.8 Bias current change VI = 14.5 V to 30 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C TJ = 0°C to 125°C mV V 6 0.8 0.5 240 mV dB 80 2 Bias current V mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059E – JUNE 1976 – REVISED AUGUST 2001 electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA78M15C TEST CONDITIONS† PARAMETER O t t voltage Output lt VI = 17 17.5 5 V to 30 V V, IO = 5 mA to 350 mA Input voltage regulation IO = 200 mA VI = 17.5 V to 30 V VI = 20 V to 30 V Ripple rejection VI = 18.5 V to 28.5 V,, f = 120 Hz IO = 100 mA, IO = 300 mA Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 200 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP 14.4 15 14.25 Dropout voltage 15.6 15.75 10 100 3 50 54 54 TJ = 0°C to 125°C MAX 25 300 10 150 VI = 17.5 V to 30 V, IO = 5 mA to 350 mA, Short-circuit output current VI = 35 V IO = 200 mA, TJ = 0°C to 125°C mV mV –1 mV/°C 90 µV 4.8 Bias current change V dB 70 2 Bias current UNIT TJ = 0°C to 125°C V 6 0.8 0.5 240 mA mA mA Peak output current 0.7 A † All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, license, warranty or endorsement thereof. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation or reproduction of this information with alteration voids all warranties provided for an associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Resale of TI’s products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2001, Texas Instruments Incorporated