UTC-IC UC2844/45

UNISONIC TECHNOLOGIES CO., LTD
UC2844/45
LINEAR INTEGRATED CIRCUIT
HIGH PERFORMANCE
CURRENT MODE PWM
CONTROLLERS
„
DESCRIPTION
The UTC UC2844/2845 are high performance fixed frequency
current mode controllers that specifically designed for Off-Line and
DC to DC converter applications with minimal external parts count.
The differences between UC2844 and UC2845 are the maximum
duty cycle ranges and under-voltage lockout thresholds. The
UC2844 ideally suited to off-line applications with UVLO thresholds
of 16V(ON) and 10V(OFF), and UC2845 has UVLO thresholds of
8.5V(ON) and 7.6V(OFF) for lower voltage applications.
„
*Pb-free plating product number:
UC2844L/UC2845L
FEATURES
* Operation output switching frequency up to 500 kHz
* Output deadtime adjustable from 50% to 70%
* Automatic feed forward compensation
* Latching PWM for cycle-by-cycle current limiting
* High current totem pole output
* Internally trimmed reference with under voltage lockout
* UVLO with hysteresis
* Low startup and operating current
„
ORDERING INFORMATION
Order Number
Lead Free
Halogen Free
UC2844L-S08-R
UC2844G-S08-R
UC2845L-S08-R
UC2845G-S08-R
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
Package
Packing
SOP-8
SOP-8
Tape Reel
Tape Reel
1 of 7
QW-R103-051.A
UC2844/45
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
„
PIN DESCRIPTION
„
PIN NO
1
2
3
4
5
6
7
8
PIN NAME
FUNCTION
Compensation Error amplifier output, this pin is made available for loop compensation.
Voltage Feedback, the inverting input of the Error Amplifier. It is normally connected to the
VFB
switching power supply output through a resistor divider.
A voltage proportional to inductor current is connected to this input. The PWM uses this
ISENSE
information to terminate the output switch conduction.
The Oscillator frequency and maximum output duty cycle are programmed by connecting
RT/CT
resistor RT to Vref and capacitor CT to ground. Operation to 1 MHz is possible.
GND
Power ground.
This output directly drives the gate of a power MOSFET. Peak currents up to 1A are
Output
sourced and sunk by this pin. The output switches at one-half the oscillator frequency.
VCC
Positive supply.
VREF
Reference output, provides charging current for capacitor CT though resistor RT.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 7
Ver.A
UC2844/45
„
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 7
Ver.A
UC2844/45
„
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
RATINGS
UNIT
Total Power Supply and Zener Current
(ICC+Iz)
30
mA
Output Current, Source or Sink (Note 2)
IOUT
1.0
A
Output Energy (Capacitive Load per cycle)
W
5.0
μJ
Current Sense and Voltage feedback Inputs
VIN
-0.3 ~ +5.5
V
Error Amp Output Sink Current
ISINK
10
mA
Power Dissipation
PD
862
mW
Junction Temperature
TJ
+150
°C
Operating Junction Temperature
TJ(OPR)
-40 ~ +120
°С
Storage Temperature Range
TSTG
-65 ~ +150
°C
Note:1.Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2.Maxmum package power dissipation limits must be observed.
„
THERMAL DATA
PARAMETER
Thermal Resistance(Junction-to-Air)
„
SYMBOL
θJA
RATINGS
145
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
(Ta=25°C, VCC=15V, RT=10k, CT=3.3nF, -40°C ≤ TA ≤ 120°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
REFERENCE SECTION
Reference Output Voltage
VREF
IOUT=1.0mA,TJ=25 C
4.95
△VOUT
VCC=12V ~ 25V
Line Regulation
△VOUT
IOUT=1.0mA ~ 20mA
Load Regulation
Temperature Stability
tS
Total Output Variation over Line,
VREF
4.9
Load, Temperature
Output Noise Voltage
eN
f=10Hz ~ 10kHz, TJ=25°C
Long Term Stability
S
TA=125°C for 1000 Hours
Output Short Circuit Current
ISC
-30
OSCILLATOR SECTION
Oscillator Voltage Swing
VOSC
Discharge Current
IDSG
VOSC=2.0V, TJ=25°C
TJ=25°C,
47
Frequency
fOSC
TLOW ≤ TA ≤ THI
46
Frequency Change with Voltage
ΔfOSC/ΔV VCC=12V ~ 25V
Frequency Change with Temperature
ΔfOSC/ΔT TLOW ≤ TA ≤ THI
ERROR AMPLIFIER SECTION
Voltage Feedback Input
VFB
VOUT=2.5V
2.45
High
VOH
RL=15k to ground, VFB=2.3V
5.0
Output Voltage Swing
Low
VOL
RL=15k to VREF, VFB=2.7V
Sink
ISINK
VOUT=1.1V, VFB=2.7V
2.0
Output Current
Source
ISOURCE
VOUT=5.0V, VFB=2.3V
-0.5
Input Bias Current
II(BIAS)
VFB=2.7V
Open Loop Voltage Gain
GVO
VOUT=2.0V ~ 4.0V
65
Power Supply Rejection Ratio
PSRR
VCC=12V ~ 25V
60
Unity Gain Bandwidth
GBW
TJ=25°C
0.7
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
MAX
UNIT
5.0
2.0
3.0
0.2
5.05
20
25
V
mV
mV
mV/°C
5.1
V
-180
μV
mV
mA
50
5
-85
1.6
10.8
52
0.2
5.0
2.50
6.2
0.8
12
-1.0
-0.1
90
70
1.0
V
mA
57
60
1.0
2.55
1.1
kHz
%
%
V
V
mA
-1.0
μA
dB
dB
MHz
4 of 7
Ver.A
UC2844/45
„
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
CURRENT SENSE SECTION
Current Sense Input Voltage Gain
(Note 2 & 3)
Maximum Current Sense Input
Threshold (Note 2)
Input Bias Current
Power Supply Rejection Ratio
Propagation Delay
OUTPUT SECTION
SYMBOL
MIN
TYP
MAX
UNIT
GV
2.85
3.0
3.15
V/V
VI(THR)
0.9
1.0
1.1
V
-2.0
70
150
-10
μA
dB
ns
II(BIAS)
PSRR
TEST CONDITIONS
VCC=12V ~ 25V (Note4)
tPLH(IN/OUT)
Low
VOL
High
VOH
Output Voltage
ISINK=20mA
ISINK=200mA
ISINK=20mA
ISINK=200mA
VCC=6.0V, ISINK=1.0mA
CL=1.0nF,TJ=25°C
CL=1.0nF,TJ=25°C
13
12
0.1
1.6
13.5
13.4
0.1
50
50
300
0.4
2.2
V
V
Output Voltage with UVLO Activated
VOL(UVLO)
1.1
V
Output Voltage Rise Time
tR
150
ns
Output Voltage Fall Time
tF
150
ns
UNDERVOLTAGE LOCKOUT SECTION
UC2844
15
16.0
17
Startup Threshold
VTHR
V
UC2845
7.8
8.4
9.0
Minimum Operating
UC2844
9.0
10.0
11.0
V
VCC(MIN)
Voltage After Turn-On
7.0
7.6
8.2
UC2845
PWM SECTION
Max
DCMAX
47
48
50
%
Duty Cycle
Min
DCMIN
0
%
TOTAL DEVICE
Power Supply Zener Voltage
VZ
ICC=25mA
30
36
V
UC2845
V
=6.5V
0.5
1.0
Power Supply Current
CC
ICC
mA
(Note 4)
VCC=14V
UC2844
12
17
Note: 1. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient
as possible.
2. This parameter is measured at the latch trip point with VFB=0V.
3. Comparator gain is defined as:
ΔV Output Compensation
AV=
ΔV Current Sense Input
4. Adjust VCC above the startup threshold before setting to 15V.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 7
Ver.A
UC2844/45
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS
„
Timing Resistor vs. Oscillator Frequency
VCC = 15V
20
10
5.0
Percent Output Deadtime, DT (%)
10
0p TA = 25℃
F
20
0p
50
F
0p
F
1.0
2.0 nF
nF
5.0
nF
C
T =
10
nF
50
Timing Resistor, RT (kΩ)
Output Deadtime vs. Oscillator Frequency
75
100
2.0 Note: Output Switches At
One-Half The Oscillator
Frequency
1.0
10k
20k
50k
100k
200k
1.0nF
70
2.0nF
5.0nF
65
CT = 10nF
60
55
100pF
50
10k
500k 1.0M
30
60
60
40
90
Phase
20
120
0
150
10
100
1.0k
10k
100k
1.0M
180
10M
Frequency, f (Hz)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Current Sense Input Threshold, VIN(THR) (V)
0
VCC = 15V
VOUT = 2.0V ~ 4.0V
RL = 100k
TA = 25℃
Excess Phase Degrees, φ
Open Loop Voltage Gain, GV (dB)
100
-20
100k
200k
500k
1.0M
Current Sense Input Threshold vs. Error Amp
Output Voltage
Error Amp Open Loop Gain Phase vs. Frequency
Gain
50k
Oscillator Frequency, IOSC (Hz)
Oscillator Frequency, IOSC (Hz)
80
500pF
20k
200pF
1.2
1.0
TA = 125℃
0.8
TA = 25℃
0.6
0.4
TA = -55℃
0.2
0
VCC = 15V
0
2.0
4.0
6.0
8.0
Error Amp Output Voltage, VOUT (V)
6 of 7
Ver.A
UC2844/45
UCX844
Supply Current, ICC (mA)
UCX845
TYPICAL CHARACTERISTICS(Cont.)
Output Saturation Voltage, VO(SAT) (V)
„
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
7 of 7
Ver.A