ALUMINUM ELECTROLYTIC CAPACITORS HD High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Lower impedance at high frequency range. Smaller case size and high ripple current. Adapted to the RoHS directive (2002/95/EC). HC HD Low Impedance Smaller HV Specifications Performance Characteristics ltem Category Temperature Range – 40 ~ +105˚C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 22 ~ 6800µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 tan δ 120Hz 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 50 Z–25˚C / Z+20˚C 2 2 2 2 2 2 Z–40˚C / Z+20˚C 3 3 3 3 3 3 120Hz < 6.3 : 2000 hours, After an application of D.C. bias voltage plus the rated ripple current for 5000 hours ( φD = φD=8 : 3000 hours, φD=10 : 4000 hours) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change Within ± 25% of initial value tan δ 200% or less of initial specified value Leakage current lnitial specified value or less Printed with white color letter on black sleeve. Marking Type numbering system (Example : 10V 3300µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 fd UHD 1 A 3 3 2 M HD f P ± 0.5 D+0.5 MAX. Sleeve (P.E.T.) Pressure relief vent (f6.3up) L+ MAX. (L < 20) 1.5 (L 20) 2.0 15MIN 4MIN (mm) fD 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 fd 0.5 0.5 0.6 0.6 0.6 0.8 In case L > 25 for the f12.5 dia. unit, lead dia. f d = 0.8mm. Size code Configuration Capacitance tolerance (± 20%) Rated Capacitance (3300mF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 á16 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard ratings V (Code) Item Cap.(µF) Code 6.3 (0J) Case size φD × L (mm) 10 (1A) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 100 101 150 151 220 221 330 331 470 471 560 561 680 681 820 821 8 × 15 0.056 0.17 995 1000 102 10 × 12.5 0.053 0.16 1030 8 × 20 0.041 0.13 1250 5 × 11 0.30 1.0 250 6.3 × 11 0.13 0.41 405 0.072 0.22 760 8 × 11.5 Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.30 1.0 250 6.3 × 11 0.13 0.41 405 8 × 11.5 0.072 0.22 760 8 × 15 0.056 0.17 995 10 × 12.5 0.053 0.16 1030 8 × 20 0.041 0.13 1250 10 × 16 0.038 0.12 1430 10 × 20 0.023 0.069 1820 1200 122 10 × 16 0.038 0.12 1430 1500 152 10 × 20 0.023 0.069 1820 10 × 25 0.022 0.066 2150 2200 222 10 × 25 0.022 0.066 2150 12.5 × 20 0.021 0.053 2360 3300 332 12.5 × 20 0.021 0.053 2360 12.5 × 25 0.018 0.045 2770 12.5 × 31.5 0.016 0.041 3290 16 × 20 0.018 0.045 3140 3900 392 12.5 × 25 0.018 0.045 2770 4700 472 12.5 × 31.5 0.016 0.041 3290 12.5 × 35.5 0.015 0.039 3400 12.5 × 35.5 0.015 0.039 3400 16 × 20 0.018 0.045 3140 16 × 25 0.016 0.043 3460 16 × 25 0.016 0.043 3460 5600 562 6800 682 V (Code) Item Cap. (µF) Code 47 470 56 560 100 101 120 121 220 221 16 (1C) Case size φD × L (mm) 25 (1E) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.30 1.0 250 6.3 × 11 0.13 0.41 405 Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.30 1.0 250 6.3 × 11 0.13 0.41 405 8 × 11.5 0.072 0.22 760 8 × 15 0.056 0.17 995 10 × 12.5 0.053 0.16 1030 330 331 8 × 11.5 0.072 0.22 470 471 8 × 15 0.056 0.17 995 8 × 20 0.041 0.13 1250 10 × 12.5 0.053 0.16 1030 10 × 16 0.038 0.12 1430 8 × 20 0.041 0.13 1250 10 × 16 0.038 0.12 1430 10 × 20 0.023 0.069 1820 680 681 760 820 821 1000 102 10 × 20 0.023 0.069 1820 1200 122 10 × 25 0.022 0.066 2150 1500 152 12.5 × 20 0.021 0.053 2360 1800 182 2200 222 10 × 25 0.022 0.066 2150 12.5 × 20 0.021 0.053 2360 12.5 × 25 0.018 0.045 2770 12.5 × 31.5 0.016 0.041 3290 16 × 20 0.018 0.045 3140 12.5 × 25 0.018 0.045 2770 12.5 × 35.5 0.015 0.039 3400 12.5 × 31.5 0.016 0.041 3290 16 × 20 0.018 0.045 3140 16 × 25 0.016 0.043 3460 2700 272 3300 332 12.5 × 35.5 0.015 0.039 3400 3900 392 16 × 25 0.016 0.043 3460 : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HD series Standard ratings V (Code) Item Cap.(µF) Code 35 (1V) Case size φD × L (mm) 50 (1H) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 22 220 33 330 5 × 11 0.30 1.0 250 6.3 × 11 0.13 0.41 405 Case size φD × L (mm) Impedance (Ω) MAX. 20˚C / 100kHz Rated ripple (mArms) – 10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.34 1.18 238 6.3 × 11 56 560 0.14 0.50 385 100 101 8 × 11.5 0.074 0.22 724 120 121 8 × 15 0.061 0.18 950 150 151 10 × 12.5 0.061 0.18 979 180 181 8 × 20 0.046 0.14 1190 220 221 10 × 16 0.042 0.12 1370 270 330 8 × 11.5 0.072 0.22 760 8 × 15 0.056 0.17 995 10 × 12.5 0.053 0.16 1030 271 8 × 20 0.041 0.13 1250 10 × 20 0.030 0.090 1580 331 10 × 16 0.038 0.12 1430 10 × 25 0.028 0.085 1870 470 471 10 × 20 0.023 0.069 1820 12.5 × 20 0.027 0.068 2050 560 561 10 × 25 0.022 0.066 2150 12.5 × 25 0.023 0.059 2410 680 681 12.5 × 20 0.021 0.053 2360 12.5 × 31.5 0.021 0.052 2860 12.5 × 35.5 0.019 0.051 2960 16 × 20 0.023 0.059 2730 16 × 25 0.021 0.056 3010 820 821 1000 102 12.5 × 25 0.018 0.045 2770 12.5 × 31.5 0.016 0.041 3290 1200 122 16 × 20 0.018 0.045 3140 1500 152 12.5 × 35.5 0.015 0.039 3400 1800 182 16 × 25 0.016 0.043 3460 : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz 22 ~ 33 0.45 0.55 0.75 0.90 1.00 39 ~ 330 0.60 0.70 0.85 0.95 1.00 390 ~ 1000 0.65 0.75 0.90 0.98 1.00 1200 ~ 6800 0.75 0.80 0.95 1.00 1.00 Cap. (µF) CAT.8100V