revision for dwg # 1PB-3PSFxyy ch.no. - - 11/2/2007 max. 6 mm [.25 in] revised by Philipp E. [.8 in] n20.2 mm 8.5 mm [.3 in] 42.6 mm [1.7 in] date description original design n28.7 mm rev [1.1 in] 4 1 2 3 * = Push Button is supplied with mounting nut and rubber gasket (ITEM 2 and 3) ITEM DESCRIPTION yy = Contact Configuration 10 = 1NO Contact 01 = 1NC Contact 11 = 1NO + 1NC Contacts 20 = 2NO Contacts 02 = 2NC Contacts unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. 1* Economy Plastic Psuh Button 2* 3* 4 Mounting Nut Rubber Gasket Panel titel CAT. NO. 3PSF1yy 3PSF2yy 3PSF3yy 3PSF4yy 3PSF6yy 3PSF8yy P2BRK 3PRG1 - COLOR White Black Green Red Blue Yellow Black Black - MIN. QTY. MAX. QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - Economy Non-Illuminated Plastic Momentary Push Buttons 3PSFxyy (x=color, yy=contact configuration) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/2/2007 drawing no.: rev.: 1PB-3PSFxyy scale: - - sheet: 1 of: 1