MCC 3SMBJ5913B THRU 3SMBJ5943B omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 3.3thru 56 Volt Voltage Range Low Inductance,Low Profile Mounting Glass Passivated Junction Available on Tape and Reel 3.0 Watt Surface Mount Silicon Zener Diodes Mechanical Data DO-214AA (SMB) (LEAD FRAME) Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL rating 1 Terminals solderable per MIL-STD-750, Method 2026 Polarity is indicated by cathode band. Packaging: Standard 12mm Tape (see EIA 481) Maximum temperature for soldering: 260 0C for 10 seconds. A B Maximum Ratings @ 25oC Unless Otherwise Specified C Maximum Forward Voltage Steady State Power Dissipation Operation and Storage Temperature Note: VF 1.5V Pd 3.0W (Note: 2) F H D (Note: 3) G E TJ , TSTG -55o C to +150 o C DIMENSIONS DIM A B C D E F G H INCHES MIN .160 .130 .006 .030 .200 .079 .075 .002 MM MIN 4.06 3.30 0.15 0.76 5.08 2.00 1.91 0.05 MAX .185 .155 .012 .060 .220 .096 .087 .008 MAX 4.70 3.94 0.31 1..52 5.59 2.44 2.21 0.203 NOTE 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 2. Forward Current @ 200mA. 3. Mounted on 5.0mm (1oz thick) Iand areas. SUGGESTED SOLDER PAD LAYOUT 0.106" 2 o Lead temperature at TL=75 C 0.083” 0.050” Revision: 8 www.mccsemi.com 1 of 4 2010/04/13 MCC Micro Commercial Components 3SMBJ5913B THRU 3SMBJ5943B ELECTRICAL CHARACTERISTICS(TL=30 centigrade unless otherwise noted) (VF=1.5Volts Max @IF=200mAdc for all types. TEST CURRENT IZT ZENER VOLTAGE VZ (*) MCC PART NUMBER VOLTS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 3SMBJ5913B 3SMBJ5914B 3SMBJ5915B 3SMBJ5916B 3SMBJ5917B 3SMBJ5918B 3SMBJ5919B 3SMBJ5920B 3SMBJ5921B 3SMBJ5922B 3SMBJ5923B 3SMBJ5924B 3SMBJ5925B 3SMBJ5926B 3SMBJ5927B 3SMBJ5928B 3SMBJ5929B 3SMBJ5930B 3SMBJ5931B 3SMBJ5932B 3SMBJ5933B 3SMBJ5934B 3SMBJ5935B 3SMBJ5936B 3SMBJ5937B 3SMBJ5938B 3SMBJ5939B 3SMBJ5940B 3SMBJ5941B 3SMBJ5942B 3SMBJ5943B MAXIMUM DYNAMIC IMPEDANCE ZZT @ IZT mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50.0 45.7 41.2 37.5 34.1 31.2 28.8 25.0 23.4 20.8 18.7 17.0 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 OHMS 10.0 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10.0 12.0 14.0 17.5 19.0 23.0 28.0 33.0 38.0 45.0 53.0 67.0 70.0 86.0 KNEE CURRENT IZK mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 KNEE IMPEDANCE ZZK MAXIMUM REVERSE CURRENT IR µA 100 75.0 25.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 OHMS 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 . REVERSE VOLTAGE VR DEVICE MARKING VOLTS 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 H13B H14B H15B H16B H17B H18B H19B H20B H21B H22B H23B H24B H25B H26B H27B H28B H29B H30B H31B H32B H33B H34B H35B H36B H37B H38B H39B H40B H41B H42B H43B * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation - The type numbers listed indicate a tolerance of +/-5% 8 3 VZ, TEMPERATURE COEFFICIENT(mV/C) PD, MAXIMUM POWER DISSIPATION (WATTS) RATING AND CHARACTERISTICS CURVES 2.5 2 1.5 1 0.5 0 4 2 0 -2 -4 20 40 60 80 100 120 140 150 180 3 TL, LEAD TEMPERATURE (C ) 4 6 8 10 12 VZ, ZENER VOLTAGE (VOLTS) Fig. 1-STEADY STATE POWER DERATING Revision: 8 VZ@IZT 6 Fig. 2-ZENER VOLTAGE-TO 12 VOLTS www.mccsemi.com 2 of 4 2010/04/13 TM MCC RATING AND CHARACTERISTICS CURVES 3SMBJ5913B THRU 3SMBJ5943B TM ZZ, DYNAMIC IMPEDANCE (OHMS) Micro Commercial Components 200 VZ, TEMPERATURE COEFFICIENT(mV/C) VZ@IZT 100 70 50 30 20 10 10 20 30 50 70 100 200 1K TJ - 25 C IZ(ms) = 0.1 IZ(dc) 500 200 100 VZ = 150V 91V 50 62V 20 10 22V 5 12V 2 6.8V 1 0.5 1 2 5 10 20 50 100 200 500 IZ, ZENER TEST CURRENT (mA) VZ, ZENER VOLTAGE (VOLTS) Fig. 3-ZENER VOLTAGE-10 TO 200 VOLTS Fig. 4-EFFECT OF ZENER CURRENT POWER IZ (dc) = 1mA 100 70 50 PPK, PEAK SURGE (WATTS) ZZ, DYNAMIC IMPEDANCE (OHMS) 1K 200 30 20 10mA 10 7 5 3 2 5 20mA 7 10 500 300 100 50 30 20 10 .1 IZ (ms) = 0.1 IZ (dc) 20 30 50 70 RECTANGULAR NONREPETITIVE WAVEFORM TJ = 25 C PRIOR TO INITIAL PULSE 200 100 .2 .3 5 1 2 3 5 10 20 50 100 PW, PULSE WIDTH(ms) VZ, ZENER VOLTAGE (VOLTS) IZ, ZENER CURRENT (mA) 100 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 10 20 30 40 50 60 70 80 90 100 VZ, ZENER VOLTAGE (VOLTS) Fig. 7-VZ = 12 THRU 40 VOLTS Revision: 8 www.mccsemi.com 3 of 4 2010/04/13 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel;3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the expresse written approval of Micro Commercial Components Corporation. Revision: 8 www.mccsemi.com 4 of 4 2010/04/13 1