UNISONIC TECHNOLOGIES CO., LTD UT2316 Power MOSFET N-CHANNEL ENHANCEMENT MODE DESCRIPTION The UTC UT2316 is N-channel enhancement mode Power MOSFET, designed in serried ranks with fast switching speed, low on-resistance and favorable stabilization. Used in commercial and industrial surface mount applications and suited for low voltage applications such as DC/DC converters. SYMBOL 3.Drain 2.Gate 1.Source ORDERING INFORMATION Ordering Number Lead Free Halogen Free UT2316L-AE3-R UT2316G-AE3-R Package SOT-23 1 S Pin Assignment 2 3 G D Packing Tape Reel MARKING 23S L: Lead Free G: Halogen Free www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-126.B UT2316 Power MOSFET ABSOLUTE MAXIMUM RATINGS (Ta = 25℃, unless otherwise specified) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (Note 3) Pulsed Drain Current (Note 1, 2) Total Power Dissipation (Ta=25℃) SYMBOL RATING UNITS VDS 30 V VGS ±20 V ID 3.6 A IDM 16 A PD 0.96 W ℃ Junction Temperature TJ +150 ℃ Storage Temperature TSTG -55 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 3) SYMBOL θJA MIN TYP MAX 175 UNIT ℃/W ELECTRICAL CHARACTERISTICS (TJ=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Source Leakage Current ON CHARACTERISTICS Gate Threshold Voltage On-State Drain Current Drain-Source On-State Resistance (Note 2) SYMBOL TEST CONDITIONS BVDSS IDSS IGSS VGS=0V, ID=250μA VDS=24V, VGS=0V VDS=0V, VGS=±20V 30 VGS(TH) VDS=VGS, ID=250μA VDS = 4.5V, VGS = 10V VDS = 4.5V, VGS = 4.5V VGS=10V, ID=3.4A VGS=4.5V, ID=2.6A 0.8 6 4 ID(ON) RDS(ON) DYNAMIC CHARACTERISTICS Input Capacitance CISS VDS=15V,VGS=0V, f=1.0MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING CHARACTERISTICS Turn-ON Delay Time tD(ON) VDD=15V, VGS=10V, ID≒1A, Turn-ON Rise Time tR RG=6Ω, RL=15Ω Turn-OFF Delay Time tD(OFF) Turn-OFF Fall Time tF Total Gate Charge QG VDS=15V, VGS=10V, ID=3.6A Gate-Source Charge QGS Gate-Drain Charge QGD SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Drain-Source Diode Forward Voltage(Note2) VSD VGS=0V, IS=0.8A Maximum Continuous Drain-Source Diode IS VD=VG=0V, VS=1.2V Forward Current Notes: 1. Pulse width limited by TJ(MAX) 2. Pulse width ≤300us, duty cycle ≤2%. 3. Surface mounted on 1 in2 copper pad of FR4 board UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 42 68 MAX UNITS 1 ±100 V μA nA 50 85 V A A mΩ mΩ 215 90 55 pF pF pF 9 9 14 6 4.3 0.65 1.2 15 15 20 12 7 ns ns ns ns nC nC nC 0.88 1.2 V 0.8 A 2 of 4 QW-R502-126.B UT2316 Power MOSFET TYPICAL CHARACTERISTICS Typical Output Characteristics Transfer Characteristics 16 16 VGS=10 thru 5V 14 12 Drain Current, ID (A) Drain Current, ID (A) 14 4V 10 8 6 3V 4 2 12 10 8 6 TC=125℃ 4 25℃ 2 2V 0 0 2 4 6 8 0 10 -55℃ 0 Drain-to-Source Voltage, VDS (V) On-Resistance vs. Drain Current 0.5 1 2 3 4 5 Gate-to-Source Voltage, VDS (V) Capacitance 350 Capacitance, C (pF) On-Resistance, RDS(ON) (Ω) 300 0.4 0.3 0.2 VGS=4.5V 0.1 250 CISS 200 150 100 COSS CRSS 50 VGS=10V 0 0.0 0 2 4 6 8 10 12 14 16 Drain Current, ID (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0 5 20 25 10 15 Drain-to-Current Voltage, VDS (V) 30 3 of 4 QW-R502-126.B UT2316 Power MOSFET TYPICAL CHARACTERISTICS(Cont.) Source Current, IS (A) On-Resistance, RDS(ON) (Ω) Normalized Thermal Transient Impedance 2 Normalized Effective Transient Thermal Impedance Duty Cycle=0.5 1 0.2 0.1 0.1 PDM 0.05 t1 t2 0.02 Single Pulse 1.Duty Cycle D=t1/t2 2.Per Unit Base=RthJA=80℃/W 3.TJM-TA=PDMZthJA 4.Surface Mounted 0.01 10-4 10-3 10-1 1 10 10-2 Square Wave Pulse Duration (sec) 100 600 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-126.B