Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 180 m3/h 14:20 AC axial fans Series 4000 Z 119 x 119 x 38 mm Sound power level Sintec sleeve bearings Ball bearings V Hz dB(A) Bel(A) / 4850 Z 100 58,9 230 50 26 4,0 / 4856 Z 100 58,9 230 50 26 4,0 4580 Z 115 67,7 230 50 30 4,3 4586 Z 115 67,7 230 50 30 4650 Z 160 94,2 230 50 4656 Z 160 94,2 230 50 4800 Z 105 61,6 115 4806 Z 105 61,6 4530 Z 120 70,6 4536 Z 120 4600 Z 4606 Z 40 13,0 1 700 -10...+65 50 000 / 27 500 1 / 13,0 1 700 -40...+75 50 000 / 20 000 1 / 13,0 1 900 -10...+65 50 000 / 27 500 2 4,3 / 13,0 1 900 -40...+75 50 000 / 20 000 2 40 5,3 / 19,0 2 650 -10...+50 37 500 / 30 000 3 40 5,3 / 19,0 2 650 -40...+75 37 500 / 17 500 3 60 28 4,1 / 12,0 1 800 -10...+70 52 500 / 25 000 4 115 60 28 4,1 / 12,0 1 800 -40...+75 52 500 / 17 500 4 115 60 32 4,4 / 12,0 2 000 -10...+70 52 500 / 25 000 5 70,6 115 60 32 4,4 / 12,0 2 000 -40...+75 52 500 / 17 500 5 180 105,9 115 60 45 5,6 / 18,0 3 100 -10...+60 40 000 / 25 000 6 180 105,9 115 60 45 5,6 / 18,0 3 100 -40...+85 40 000 / 15 000 6 2 0,10 5 20 1 0,05 4 0 20 25 40 50 75 60 100 80 125 100 150 50 Hz 152 HP CFM m³/h 60 Hz Û S P IP54 Curve Hours 6 3 30 10 °C [in H2O] 0,25 Pa 50 RPM 0,20 60 Watts 0,15 70 Service life L10 at 40 °C Sound pressure level CFM Temperature range Frequency m3/h Nominal speed Nominal voltage Type Power input Air flow AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller. Air exhaust over struts. Direction of rotation clockwise, seen on rotor. Electrical connection via 2 flat plugs 2.8 x 0.5 mm. Optionally available: Models with reinforced flanges and single leads. Fan housing with grounding lug and screw M4 x 8 (TORX). Mass: 540 g. Please note our new ACmaxx series. With identical mounting dimensions and voltages, this series achieves higher energy efficiency. Air flow – – – – – – – – Nominal data Seite 152 at T max max. 18.01.2011 Hours