V965ME06-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communications • Microwave Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 6380 Typ Max Units 6420 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -89 dBc/Hz Harmonic Suppression (2nd) -19 dBc Tuning Voltage 0.5 4.5 MHz/V 80 Tuning Sensitivity (avg.) 2 dBm Input Capacitance 25 pF Pushing 11 MHz/V Pulling (14 dB Return Loss, Any Phase) 13 MHz 85 °C Max Units Power Output -5 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -1.5 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 50 Vdc 60 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V965ME06-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 6530 6510 6490 6470 6450 6430 6410 6390 6370 6350 6330 6310 6290 6270 6250 6230 6210 6190 6170 6150 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 -5 6171 6217 6243 6268 6307 6336 6364 6409 6443 6474 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B