12 1-800-735-6200 Sept. 99 1 of 2 VI-200 DC-DC Converters 50 to 200 Watts Converter Selection Chart VI-2 Features ■ Up to 50W/Cubic Inch ■ UL, CSA, TÜV, VDE, BABT, AUSTEL ■ 80-90% Efficiency ■ Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7) ■ Remote Sense and Current Limit ■ OVP, Thermal Shutdown ■ Logic Disable ■ Wide Range Output Adjust ■ Compatible Power Booster Modules ■ ZCS Power Architecture ■ Low Noise FM Control ■ CE Marked Product Highlights The VI-200 Family, with over 8 million shipped, is Vicor’s first generation of “zero-current-switching” component-level DC-DC converters. Operating at frequencies up to 2 MHz, VI-200 Family Converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. Power Boosters provide a simple, cost effective, off-the-shelf solution for higher power output requirements. One or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power. The flexibility of Vicor’s power components is also available in half-size, half-power VI-J00 MiniMods. (pg. 72) Packaging Options SlimMods™, high power density, flangeless packages and FinMods™, featuring integral finned heatsinks. SlimMod: Option suffix: - S Example: VI - 2XX - XX - S FinMod: Option suffix: - F1 and - F2 0 1 W 2 3 N 4 T 5 6 7 = 12V = 24V = 24V = 36V = 48V = 48V = 72V = 110V = 150V = 300V = 150/300V 10 21 18 21 42 36 55 66 100 200 100 - 20V 32V 36V 56V 60V 76V 100V 160V 200V 400V 375V (1) (4) (2) (3) (4) (4) (5) (2) (5) (4) (6) n/a 18V n/a 18V 36V n/a 45V n/a 85V 170V 90V -10°C to -25°C to -40°C to -55°C to +85°C +85°C +85°C +85°C E C I M = = = = -20°C to +100°C -40°C to +100°C -55°C to +100°C -65°C to +100°C 5V Outputs 75W 150W 100W > 5V Outputs 75W 150W 100W = = = = = = = = = 2V 3.3V 5V 10V 12V 15V 24V 28V 48V 1 to 95V, consult factory. VOUT ≥ 5V Y = 50W X = 75W W = 100W V = 150W U = 200W Y X W V U VOUT < 5V = 10A = 15A = 20A = 30A = 40A For additional output power use “Boosters”. Change (VI-2xx-xx) to (VI-Bxx-xx). Overtemperature shutdown 95°C typical (recycle power to restart). Max. Output For (1) (2) (3) Z Y 0 M 1 2 3 L 4 22V 36V n/a 60V 72V n/a 110V n/a 215V 425V n/a Output Power/Current Product Grade/ Product Grade/ Operating Temp. Storage Temp. E = C = I = M= Output Voltage Input Voltage Range Brownout /Transient* Nominal < 5V Outputs 15A 30A 20A Max. Output For (4) (5) (6) 5V Outputs 200W 150W 75W > 5V Outputs 200W 200W 100W < 5V Outputs 40A 40A 20A * Brownout 75% of rated load; transient voltage for 1 second. Mechanical Drawing .50 (12,7) .30 (7,6) ±.015 (0,38) 2.10 (53,3) .15 (3,8) 4.60 (116,8) 3.60 (91,4) .080 (2,0) Dia (2) places Solder plate over copper alloy 1.80 (45,7) 4 9 3 2 8 7 6 1 5 VI-200 FULL R .15 (3,8) Product ID this surface 1.40 1.00 (35,6) .70 (25,4) (17,8) .40 (10,2) .35 (8,9) ±.015 (0,38) .040 (1,0) Dia (7) places Solder plate over copper alloy Pin # 1 2 3 4 5 6* 7* 8* 9 Function +In Gate In Gate Out -In +Out +Sense Trim -Sense -Out * Do not connect on Booster modules 2.40 (61,0) 4.20 (106,7) Examples: VI - 2XX - XX -F1, 0.75" height VI - 2XX - XX -F2, 1.00" height .22 (5,6) MIN .50 (12,7) .30 (7,6) Min 1.75 (44,5) +.030 (0,76) -.000 .01 .12 (3,0) Aluminum Base For the latest Vicor Product Information: www.vicr.com 12 1-800-735-6200 Sept. 99 2 of 2 Converter Specifications (typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified) VI-200 E-Grade PARAMETER MIN. ■ Input Characteristics Inrush charge Input reflected ripple current – pp ■ Dielectric Withstand Characteristics Input to output Output to baseplate Input to baseplate ■ Thermal Characteristics Efficiency Baseplate to sink Thermal shutdown4 (Drivers only) ■ Mechanical Specifications Weight MIN. MAX. ( ) ( ) UNITS TEST CONDITIONS Coulombs IIN Nominal line Nominal line, full load dB 120 Hz, nominal line dB 2400 Hz, nominal line 1.35 2 1.35 2 Watts 1% 2% 0.5% 1% 0.5% 0.05% 0.2% 0.01 0.02 1% 0.2% 0.5% 0.02 VNOM VNOM VNOM % / °C %/1K hours 150 mV 5% 3% 110% 60 mV 2% 0.75% 100 mV 3% 1.5% 110% 125%2 135% 125% 130% 0.02 0.02 50% 0.5 125%2 105% 20% 135% 140% 50% 0.5 115% 105% 20% 50 10 3 6 50 10 3 6 0.65 0.65 6 1.05 0.95 3,000 500 1,500 90 TYP. 120x10 -6 200x10-6 10% 30+20Log Vin Vout 20+20Log Vin Vout ( ) No load power dissipation ■ Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Power sharing accuracy VI-200 C-, I-, M-Grade MAX. 120x10 -6 10% 25+20Log Vin Vout Input ripple rejection ■ Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple - pp: 2V, 3.3V 5V 10-48V Trim range1 Total remote sense compensation OVP set point Current limit Short circuit current 3 TYP. 6 1.05 0.95 3,000 500 1,500 78-88% 0.2 95 6.0 (170) 105 90 20 MHz bandwidth 20 MHz bandwidth 20 MHz bandwidth Volts VNOM INOM INOM Ohms Ohms Volts Volts mA VRMS VRMS VRMS 80-90% 0.2 95 6.0 (170) 105 LL to HL, 10% to Full Load LL to HL, No Load to 10% Over rated temp. °C/Watt °C 0.25V max. neg. leg Recycle power Automatic restart Use open collector Baseplate earthed With Vicor P/N 01777 Cool and recycle power to restart Ounces (Grams) 1 10V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range. 131% nominal for booster modules. 3 Output voltages of 5V or less incorporate foldback current limiting; outputs of 10V and above provide constant current limiting. 4 No overtemp protection in booster modules. 2 For the latest Vicor Product Information: www.vicr.com