Vishay Thin Film Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks FEATURES Actual Size Vishay Thin Film resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consistent dimensions for ease of placement with automatic SMT equipment. Vishay Thin Film stocks many designs and values for off-the-shelf convenience. With Vishay Thin Film you can depend on quality products delivered on time with service backing the product. SCHEMATICS 01 SCHEMATIC • Lead (Pb)-free available • Reduces total assembly costs Pb-free Available • Compatible with automatic surface mounting equipment RoHS* COMPLIANT • UL 94V-0 flame resistant • Thin Film Tantalum Nitride on silicon • Choice of package sizes: VTSR (TSSOP) JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012 • Moisture sensitivity level 1 (per IPC/JEDEC STD-20C) TYPICAL PERFORMANCE ABS TRACKING 100 NA ABS RATIO 5, 2, 1 NA TCR TOL RESISTORS WITH ONE PIN COMMON The 01 circuit provides nominally equal resistors connected between a common pin and a discrete PC board pin. Commonly used in the following applications: Resistance Range: 10 Ω to 47 kΩ • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • "Wired OR" Pull-up • Power Driven Pull-up • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallels Pull-up Broad selection of standard values available Lead #1 03 SCHEMATICS ISOLATED RESISTORS The 03 circuit provides nominally equal resistors isolated from all others and wired directly across. Commonly used in the following applications: Resistance Range: 10 Ω to 47 kΩ • "Wired OR" Pull-up • Power Driven Pull-up • Powergate Pull-up • Line Termination Lead #1 • Long-line Impedance Balancing • LED Current Limiting • ECL Output Pull-down • TTL Input Pull-down Broad selection of standard values available 05 SCHEMATICS DUAL-LINE TERMINATOR; PULSE SQUARING R The 05 circuit contains pairs of resistors connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for dual-line termination and pulse squaring. Standard values are: R1 R1 R2 R1 R1 R2 R1 R2 R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 VSSR1605 - R1 = 220 Ω, R2 = 330 Ω R1 = 330 Ω, R2 = 470 Ω VSSR2005 - R1 = 220 Ω, R2 = 330 Ω 1 Lead #1 47 SCHEMATICS DIFFERENTIAL TERMINATOR Vcc R1 R2 R1 Lead #1 R1 = 220 Ω, R2 = 1.8 kΩ R1 = 1.5 kΩ, R2 = 3.3 kΩ The 47 schematic consists of series resistor sections connected between Vcc and Ground. Each contains 3 resistors of 2 different resistance values. Standard values are: VSSR20 and VTSR20 VSSR16 and VTSR16 - R1 = 270 Ω, R2 = 120 Ω R1 = 330 Ω, R2 = 220 Ω R1 = 330 Ω, R2 = 150 Ω GND * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60003 Revision: 11-Jun-07 For technical questions, contact: [email protected] www.vishay.com 21 SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR Vishay Thin Film Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Electrical Specifications CONDITIONS 16, 20, 24 10 Ω to 47 kΩ Resistance Range TCR: Tracking NA Absolute ± 100 ppm/°C Ratio Tolerance: - 55 °C to + 125 °C NA ± 5 % standard (± 2 % available)/per E - 24 table ± 1 % standard (check factory)/per E - 96 table Absolute Power Rating: per E - 24 table per E - 24 table per E - 96 table Resistor 100 mW (Maximum) at + 70 °C Package 16 = 1.0 W 20 = 1.2 W 24 = 1.4 W 0 °C to + 70 °C Voltage Coefficient 5 ppm/V typical Working Voltage 50 VDC Operating Temperature Range - 55 °C to + 125 °C Storage Temperature Range - 55 °C to + 150 °C Noise < - 35 dB DIMENSIONS AND IMPRINTING in inches and millimeters B Part Marking-Model, Pin Count (Optional), Schematic E C xxxx Resistance Value Code H F G Date Code Pin #1 A J W D A MODEL 16 PIN VTSR-xxxx - (millimeters) - 20 PIN 24 PIN B (Ref.) C (Ref.) D 0.256 ± 0.003 0.306 ± 0.003 0.0256 0.0087 0.004 F G J (Ref.) H W 0.024 0.173 ± 0.003 0.015 × 45° 0.252 ± 0.005 0.005 0.043 ± 0.005 0.65 0.22 0.10 0.61 VSSR-xxxx 0.193 ± 0.004 0.341 ± 0.003 0.341 ± 0.003 0.025 6.50 ± 0.08 7.77 ± 0.08 E (Typ.) 4.39 ± 0.08 0.38 6.40 ± 0.13 0.13 1.09 ± 0.13 0.010 0.006 0.025 0.154 ± 0.003 0.015 × 45° 0.236 ± 0.008 0.010 0.064 ± 0.005 (millimeters) 4.90 ± 0.010 8.66 ± 0.08 8.66 ± 0.08 0.64 0.25 0.15 0.64 VSOR-xxxx 0.390 ± 0.010 NA NA 0.050 0.016 0.008 0.030 0.152 ± 0.003 0.015 × 45° 0.236 ± 0.005 0.008 0.064 ± 0.005 (millimeters) NA NA 1.27 0.41 0.20 0.76 9.91 ± 0.25 3.91 ± 0.08 3.86 ± 0.08 0.38 5.99 ± 0.20 0.38 5.99 ± 0.13 0.25 0.20 1.63 ± 0.13 1.63 ± 0.13 MARKING MODEL VXXX VSOR VSSR VTSR www.vishay.com 22 PIN COUNT (optional) SCHEMATIC XX 16 20 24 RESISTANCE RESISTANCE DATE CODE XX XXXX XXX XXXX 01, 03, 05 or 47 1 % RESISTANCE e.g.: 43R2 4 digits are used to express ohmic values only less than 100 Ω. R is used to designate the decimal position OR 1 %, 2 %, 5 % RESISTANCE e.g.: 103 = 10K The first 2 digits are significant figures, the last digit specifies the number of zeros to follow. For technical questions, contact: [email protected] Document Number: 60003 Revision: 11-Jun-07 Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks Vishay Thin Film MECHANICAL SPECIFICATIONS Resistive Element Tantalum Nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating Tin lead Lead Coplanarity 0.0005" Marking Resistance to Solvents Permanency testing per MIL-STD-202, Method 215 Lead (Pb)-free Option 100 % Sn Matte Lead (Pb)-free Finish Plated DERATING CURVE PACKAGING INFORMATION LEADS TAPE AND REEL TUBES 20 2500 74 24 2500 62 16 2500 98 20 2500 55 24 2500 55 16 2500 48 Percent of Rated Power MODEL VTSR (TSSOP) VSSR (QSOP) VSOR (SOIC) 100 80 60 40 20 0 0 70 125 Ambient Temperature °C 150 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSR1601103JT1 (preferred part number format) V T S R 1 6 0 1 V S O R 1 6 0 5 1 3 3 0 1 3 4 7 1 J T 1 G T 1 GLOBAL MODEL PIN COUNT SCHEMATIC RESISTANCE (3, 4 or 6 digits) TOLERANCE PACKAGING VTSR VSSR VSOR Lead (Pb)-free (e3) date code > 2705 16 (not VTSR) 20 (not VSOR) 24 (not VSOR) 01 (Bussed) 03 (Isolated) XXX: ≥ 100R & all 1 %, 2 % & 5 % First 2 digits are significant figures. Last digit specifies number of zeroes to follow. XXXX: < 100R 1 % First 3 digits are significant figures. Last digit specifies number of zeroes to follow. F = 1.0 % G = 2.0 % J = 5.0 % TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel 2500 TS = 100 Min 1 Mult xxx xxx First 2 digits are significant figures. Last digit specifies number of zeroes. G = 2.0 % J = 5.0 % 16 (not VTSR) 20 (not VSOR) 05 (Terminator) 47 (Terminator) UF = TUBED Historical Part Number example: VSSR2001102GT/R (will continue to be accepted) VSSR 20 01 102 G T/R MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING Document Number: 60003 Revision: 11-Jun-07 For technical questions, contact: [email protected] www.vishay.com 23 SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1