200 Watt, 13.75-14.50 GHz, CW, high efficiency traveling wave tube, coaxial input, waveguide output, conduction cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dualstage depressed collector. Features • 200 Watt model • Coaxial Input • Waveguide Output • Weight: 6 lbs. max • Conduction Cooled • Dual-Stage Collector VTU-6299H1 VTU-6299H2 VTU-6299H3 Frequency (GHz) 13.75 - 14.5 12.75 - 14.5 14.50 - 15.35 Power output (min) 200 W 200 W 200 W TYPICAL OPERATING PARAMeters MINIMUMMAXIMUM TYPICALUNITS Filament Voltage:6.2 Filament Current:1.0 Helix Voltage:6.8 Helix Current:--- Collector Voltage 1:49.0 Collector Current 1: Collector Voltage 2:31 Collector Current 2:--- Cathode Warm-up Time:3.0 Drive Power:--- Baseplate Temp:--- Prime Power:--- Load VSWR:--- 6.4 1.5 7.4 8.0 51.0 100 33 220 --- 10 120 625 1.5 6.3 Vdc 1.3A 7.1 kV 4.0 mA 50.0 % 3 dc / 110 rf mA 32 % 205 dc / 92 rf mA ---Minutes 0 dBm --- °C 565 Watts --- VSWR The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI 06/12 W, Ku-band helix twt series CPI | 200 4CW50,000J 200 W, Ku-Band Helix TWT Series