ETC WE15-300

2/11/01
10:53 am
Page 1
DC/DC Converters
10/15 Watts
WE10/15 Series
XPiQ inc.
Intelligent Design Quality Product
•
Industry Standard Package
•
Designed For Telecom Standards
•
Low Voltage Outputs to 1.8 Volts
•
Under Voltage Lockout
•
Remote On/Off
•
Output Voltage Adjustment
•
Conducted EMI level B with
External Filtering
Specification
Input
Input Voltage
•
Input Current
•
Start Up Time
Remote On/Off
•
•
Input Reverse Voltage •
Protection
Undervoltage Lockout •
Protection
18-36 VDC
36-75 VDC
0.17 A - 0.82 A typical for WE15
0.21 A - 0.52 A typical for WE10
Less than 10 ms
Negative Logic Standard
Positive Logic Available.
External components required
•
Protected to short circuit conditions
•
•
•
•
•
80% typical for 5 V models
1500 VDC Input to Output
2.4 million hours per Bellcore
Potted module with plastic case
28.3 grams typical
General
Efficiency
Isolation Voltage
MTBF
Package Style
Weight
24 Vin - 11 V min, 14 V typical
48 Vin - 20 V min, 27 V typical
Environmental
•
•
1.8 - 12 VDC
±10%
Operating
Temperature
Cooling
200 LFM
•
•
•
•
0.4 Watts
±0.5% maximum
±1.0% maximum
±4%
Storage Temperature •
Shock
•
Vibration
•
•
•
100 mV typical
5% deviation 0.8 ms recovery time
for 25% load change
±0.015%°C
Standard with auto restart
see chart
continuous with auto restart
Output
Output Voltage
Output Voltage
Adjustment
Minimum Load
Line Regulation
Load Regulation
Output Voltage
Accuracy
Ripple and Noise
Transient Response
Short Circuit
Protection
Temperature Coefficient
Overvoltage
•
Protection
Overcurrent
•
Protection
•
www.XP-iQ.com
•
-40°C to 105°C Case Temperature
•
Full power with Convection cooling
WE10 - Full power to 80°C ambient
WE15 - Full power to 60°C ambient
See derating chart
-55°C to +125°C
70G/6ms 1/2 sine 3 shocks x 6 sides
2.5G RMS, 10-55Hz, sweep vibration
1 hour each axis
Safety
Safety Approvals
•
EMI/EMC
•
Warranty
•
UL1950, EN60950, VDE 0805,
CSA 22.2 No. 950, CE marked for LVD
EN55022 and FCC level B Part 15
with external filtering
1 Year
•
WE
PH: 508 429.9883
FAX: 800 226.2100
Email: [email protected]
Holliston, MA 01746 USA
2/11/01
10:53 am
Page 2
OUTPUT VOLTAGE & CURRENT RATINGS
Output Voltage
Single Output
1.80
2.00
2.50
3.30
3.30
5.00
5.00
12.0
12.0
Dual Output
±12.0
WE 10/15
Output Current
Output Power
OVP Clamp
Model 24 V Input
Model 48 V Input
3.00
3.00
3.00
2.42
3.00
2.00
3.00
0.83
1.25
5.40
6.00
7.50
8.00
10.00
10.00
15.00
10.00
15.00
2.6-4.0 V
2.6-4.0 V
3.25-4.0 V
3.7-5.70 V
3.7-5.70 V
5.6-7.0 V
5.6-7.0 V
13.2-16.0 V
13.2-16.0 V
WE15-218
WE15-220
WE15-225
WE10-200
WE15-200
WE10-201
WE15-201
WE10-202
WE15-202
WE15-318
WE15-320
WE15-325
WE10-300
WE15-300
WE10-301
WE15-301
WE10-302
WE10-302
0.42
10.00
13.2-18. 0 V
WE10-205
WE10-305
Notes
•
WE
Negative logic is standard. For positive logic add “H” suffix to part number.
Mechanical Details
Single Output
Pin
1
2
3
4
5
6
Dual Output
Pin
1
2
3
4
5
6
Pin Designation
-VIN
+VIN
On/Off
+VOUT
TRIM
-Vout
Pin Designation
-VIN
+VIN
On/Off
+VOUT
Common
-Vout
0.110 +0.010
Derating Curve
WE10
WE10-2xx unit used as a standard curve
www.XP-iQ.com
WE15
WE15-3xx unit used as a standard curve
PH: 508 429.9883
FAX: 800 226.2100
Email: [email protected]
Holliston, MA 01746 USA