MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 1. PART NO. EXPRESSION : WI565050-1R0KF(a) (c) (d)(e) (b) (f) (a) Series code (d) Tolerance code : J = ±5%, K = ±10%, M = ±20% (b) Dimension code (e) F : RoHS Compliant (c) Inductance code : 1R0 = 1.00uH (f) 11 ~ 99 : Internal controlled number 2. CONFIGURATION & DIMENSIONS : A D C B F E G I H I 822 PCB Pattern Unit:m/m A B C D E F G H I 5.6±0.3 5.0±0.2 4.0±0.3 1.1 Ref. 4.0±0.1 0.7±0.1 4.0 Ref. 4.5 Ref. 2.0 Ref. 3. SCHEMATIC : 4. MATERIALS : a (a) Core b (b) Wire d (c) Terminal c (d) Capsulate e (e) Epoxy NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 5. GENERAL SPECIFICATION : a) Temp. rise : 20°C Max. d) Operating temp. : -40°C to +105°C f) Rated current : Current cause inductance drop within 10% 6. ELECTRICAL CHARACTERISTICS : Inductance ( µH ) Tolerance Q Min. Test Frequency ( MHz ) WI565050-1R0 F- 1.00 K, M 10 7.96 95 0.030 1800 WI565050-1R2 WI565050-1R5 WI565050-1R8 WI565050-2R2 WI565050-2R7 WI565050-3R3 WI565050-3R9 FFFFFFF- 1.20 1.50 1.80 2.20 2.70 3.30 3.90 K, M K, M K, M K, M K, M K, M K, M 10 10 10 10 10 10 10 7.96 7.96 7.96 7.96 7.96 7.96 7.96 70 55 47 42 0.035 0.04 0.05 0.06 0.07 0.08 0.09 1700 1600 1400 1300 1200 1120 1050 WI565050-4R7 WI565050-5R6 WI565050-6R8 WI565050-8R2 WI565050-100 WI565050-120 WI565050-150 WI565050-180 WI565050-220 WI565050-270 WI565050-330 WI565050-390 WI565050-470 WI565050-560 WI565050-680 WI565050-820 FFFFFFFFFFFFFFFF- 4.70 5.60 6.80 8.20 10.00 12.00 15.00 K, M K, M K, M K, M K, M K, M K, M 10 10 10 10 10 10 10 7.96 7.96 7.96 7.96 2.52 2.52 2.52 0.11 0.13 0.15 0.18 0.21 0.25 0.30 950 880 810 750 690 630 580 18.00 22.00 27.00 33.00 39.00 47.00 56.00 68.00 82.00 K, M J, K J, K J, K J, K J, K J, K J, K J, K 10 10 10 10 10 10 10 10 10 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.36 0.43 0.52 0.62 0.72 0.85 1.0 1.2 1.4 530 480 440 400 370 340 310 290 270 Part No. SRF ( MHz ) Min. 37 34 32 29 26 24 22 19 17 16 14 13 11.5 10.5 9.5 8.5 7.8 7.0 6.4 RDC (ȍ) Max. IDC ( mA ) Max. Tolerance : J = ±5% K = ±10% M = ±20% NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. WI565050-101 WI565050-121 WI565050-151 WI565050-181 WI565050-221 WI565050-271 WI565050-331 WI565050-391 WI565050-471 WI565050-561 WI565050-681 WI565050-821 WI565050-102 WI565050-122 WI565050-152 WI565050-182 WI565050-222 WI565050-272 WI565050-332 WI565050-392 WI565050-472 WI565050-562 WI565050-682 WI565050-822 WI565050-103 FFFFFFFFFFFFFFFFFFFFFFFFF- Inductance ( µH ) Tolerance Q Min. 100.00 120.00 150.00 180.00 220.00 270.00 330.00 390.00 470.00 560.00 680.00 820.00 1000.00 1200.00 1500.00 1800.00 2200.00 2700.00 3300.00 3900.00 4700.00 5600.00 6800.00 8200.00 10000.00 J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 Test Frequency ( MHz ) SRF ( MHz ) Min. 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 6.0 5.4 4.8 4.4 3.9 3.6 3.2 2.9 2.6 2.4 2.2 2.0 1.8 1.5 1.4 1.3 1.2 1.1 1.0 1.0 0.9 0.8 0.7 0.6 0.5 RDC (ȍ) Max. 1.6 1.9 2.2 2.8 3.4 4.2 4.9 5.8 7.0 8.5 10 13 15 17 20 30 35 55 60 70 78 85 110 125 150 IDC ( mA ) Max. 250 230 210 190 170 155 140 130 120 110 100 90 85 75 70 60 55 45 40 38 36 33 30 28 25 Tolerance : J = ±5% K = ±10% M = ±20% NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 7. RELIABILTY TEST : ITEM PERFORMANCE TEST CONDITION Environmental Tests High Temperature Storage Test Reference documents: MIL-STD-202G Method 108A 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% Temperature : 85±2°C Time : 96±2 hours Tested after 1 hour at room temperature Temp 85°C High temperature Room Temp 1H 0 Low Temperature Storage Test Reference documents: IEC 68-2-1A 6.1 6.2 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% 96H Test Time Temperature : -25±2°C Time : 96±2 hours Tested after 1 hour at room temperature Room Temp 96H 1H 0 Low temperature -25°C Test Time Temp Humidity Test Reference documents: MIL-STD-202G Method 103B 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% Temperature : 40±2°C Humidity : 93±3% RH Time : 96±2 hours Tested after 1 hour at room temperature 40°C 93%RH Temp & Humidity Room Conditions High temperature Room High humidity Temp 1H 0 Thermal shock test Reference documents: MIL-STD-202G Method 107G 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% 96H Test Time Conditions of 1 cycle : Step 1 : -40°C for 30 minute Step 2 : 125°C for 30 minute Total : 20 cycles Temp 85°C Room Temp 0 -25°C 1/2H Time 1/2H Physical Characteristics Tests Solderability Test More than 95% of termincal electrode should be covered with solder. Reference documents: MIL-STD-202G Method 208H IPC J-STD-002B Solder temperature : 245±5°C Dip time : 5 secs. Solder : lead free Flux : rosin flux NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 7. RELIABILTY TEST : ITEM Heat Endurance of Reflow Soldering Reference documents: IPC J-STD-020B Vibration Test Reference documents: MIL-STD-202G Method 201A PERFORMANCE TEST CONDITION 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% Refer to reflow curve. No. of cycle : 3 Peak temp. : 245±5°C 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% Frequency : 10~55Hz Amplitude : 0.75mm Directions & times : X, Y, Z directions for 2 hours. A period of 2 hours in each of 3 mutually perpendicular directions (Total 6 hours). Freq 55Hz 10Hz 1Min Drop Test Reference documents: MIL-STD-202G Method 203C Terminal Strength Push Test Reference documents: JIS C 5321:1997 Time 1. No case deformation or change in appearance. 2. ǻL/L<10% 3. ǻQ/Q < 30% 4. ǻDCR/DCR<10% or 15% Drop from a height of 1m with 981m/s² (100G) altitude (1 angle, 1 ridge and 2 surface orientations) Pulling Test : A : Sectional area of terminal Bend PCB at middle point, the deflection shall be 2mm. Pulling Test : Force Time (sec) A<8mm² >5N 30 8mm²<A<20mm² >10N 10 20mm²<A >20N 10 Y X Bending Test : R0.5 Bending Test : The terminal electrode & the dielectric must not be damaged by the forces applied on the right conditions. 1.0 Sample Reflow Curve 300 260±5°C 250 270 270 200 150 100 50 Preheat R amp-up Peak Ram p-dow n NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 MOLDED WIREWOUND CHIP INDUCTORS WI565050 SERIES 8. PACKAGING INFORMATION : ( Unit : mm ) 8-1. Reel & Tape Dimension 330 12 0° 2.5±0.5 13±1 23±1 4±0.1 12 1.75±0.1 16 1.50 +0.10 -0.00 Tape trailer 160mm Min. Tape leader 388mm Min. Components Cover tape 250mm Min. 822 822 822 822 822 Direction of feed 8-2. Quantity & G.W. per package OUTER : CARTON INNER : REEL SERIES WI565050 Q'TY (PCS) G.W. (Kg) Q'TY (PCS) G.W. (Kg) SIZE (cm) 1000 0.76 16000 14 36 x 36 x 40 NOTE : Specifications subject to change without notice. Please check our website for latest information. 25.10.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6