PWA Vishay Electro-Films CHIP RESISTORS Thin Film Power Resistors FEATURES • Wire bondable Product may not be to scale • 500 mW power • Chip size: 0.030 x 0.045 inches • Resistance range 0.3 Ω to 1 MΩ The PWA series resistor chips offer a 500 mW power rating in a small size. These offer one of the best combinations of size and power available. The PWAs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. The PWAs are 100 % electrically tested and visually inspected to MIL-STD-883. • Oxidized silicon substrate for good power dissipation • Resistor material: Tantalum nitride, self-passivating APPLICATIONS The PWA resistor chips are used mainly in higher power circuits of amplifiers where increased power loads require a more specialized resistor. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES Tightest Standard Tolerance Available 5% 1% 0.5 % 0.1 % PROCESS CODE ± 25 ppm/°C ± 50 ppm/°C ± 100 ppm/°C ± 150 ppm/°C CLASS H* CLASS K* 002 006 001 005 000 008 009 010 *MIL-PRF-38534 inspection criteria 0.3 Ω 2 Ω 25 Ω 5Ω 100 Ω *600, - 100 ppm R < 2 Ω, ± 250 ppm for 2 Ω to 5 Ω 200 kΩ 500 kΩ 300 kΩ 1 MΩ STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Noise, MIL-STD-202, Method 308 100 Ω - 250 kΩ < 100 Ω or > 251 kΩ - 35 dB typ. - 20 dB typ. Moisture Resistance, MIL-STD-202 Method 106 ± 0.5 % max. ΔR/R Stability, 1000 h, + 125 °C, 250 mW ± 0.5 % max. ΔR/R Operating Temperature Range - 55 °C to + 125 °C Thermal Shock, MIL-STD-202, Method 107, Test Condition F ± 0.1 % max. ΔR/R High Temperature Exposure, + 150 °C, 100 h ± 0.2 % max. ΔR/R Dielectric Voltage Breakdown 200 V 1012 min. Insulation Resistance Operating Voltage Steady State 5 x Rated Power 100 V max. 200 V max. DC Power Rating at + 70 °C (Derated to Zero at + 175 °C) (Conductive Epoxy Die Attach to Alumina Substrate) 5 x Rated Power Short-Time Overload, + 25 °C, 5 s www.vishay.com 60 For technical questions, contact: [email protected] 500 mW ± 0.1 % max. ΔR/R Document Number: 61019 Revision: 12-Mar-08 PWA Thin Film Power Resistors Vishay Electro-Films 0.030 0.024 0.030 0.024 0.007 0.007 0.030 0.024 0.030 0.024 0.007 0.007 0.0045 0.045 0.045 0.045 0.007 TYPICAL RANGE 0.3 Ω - 1.3 Ω TYPICAL RANGE 1.4 Ω - 7.4 Ω TYPICAL RANGE 7.5 Ω - 42 Ω TYPICAL RANGE 43 Ω - 1 MΩ SCHEMATIC MECHANICAL SPECIFICATIONS in inches PARAMETER Chip Size 0.030 x 0.045 ± 0.002 (0.762 x 1.143 ± 0.5 mm) Chip Thickness 0.010 ± 0.002 (0.254 ± 0.05 mm) Chip Substrate Material Oxidized silicon, 10 kÅ minimum SiO2 Resistor Material Tantalum nitride, self-passivating Bonding Pad Size 0.007 x 0.024 (0.1778 x 0.6096 mm) Number of Pads 2 Pad Material 10 kÅ minimum aluminum Backing Options: None, lapped semiconductor silicon Gold back for eutectic die attach Gold bonding pads, 15 kÅ minimum thickness Contact Applications Engineer ORDERING INFORMATION Example: 100 % visual, 10 kΩ, ± 1 %, ± 100 ppm/°C TCR, aluminum pads, class H visual inspection W INSPECTION/ PACKAGING W = 100 % visually inspected parts in matrix tray per MIL-STD-883 X = Sample, visually inspected parts loaded in matrix trays (4 % AQL) Document Number: 61019 Revision: 12-Mar-08 PWA PRODUCT FAMILY 000 PROCESS CODE See Process Code table 1000 RESISTANCE VALUE Use first 4 digits significant digits of the resistance For technical questions, contact: [email protected] 1 MULTIPLIER CODE D = 0.0001 C = 0.001 B = 0.01 A = 0.1 0=1 1 = 10 2 = 100 3 = 1000 F TOLERANCE CODE B = 0.1 % C = 0.2 % D = 0.5 % F = 1.0 % G = 2.0 % H = 2.5 % J = 5.0 % K = 10 % www.vishay.com 61 CHIP RESISTORS DIMENSIONS in inches Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1