JDSU WVL-2B1050412

COMMUNICATIONS COMPONENTS
Broadband (Fabry-Perot) Wavelength Locker
Key Features
• Extremely low temperature dependence
• High accuracy
• Periodic locking covers all channels (one part number for
any channel to reduce inventory)
• Temperature sensor included for better locking accuracy, if
necessary
• Operation over C and L bands
Applications
• Precise laser locking for DWDM
and ultra DWDM transmitter
• Wavelength monitoring
• Laser stabilization for tunable laser
module
• DWDM channel frequency and
optical power monitoring
The broadband (Fabry-Perot) wavelength locker is a thermally stable, air-gapped,
etalon-based device that can be used to stabilize laser sources for high-density
WDM applications and tunable lasers. Our 50 GHz, free spectral range (FSR)
designs are industry-standard products.
The broadband wavelength locker has a wide capture range and excellent
wavelength accuracy. The temperature sensor, included with every locker, can be
used to calibrate out thermal effects when even higher wavelength accuracy is
required or when using a very narrow FSR locker.
Compliance
• Telcordia 1221
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
BROADBAND (FABRY-PEROT ) WAVELENGTH LOCKER
2
Theoretical Frequency Response: 50 GHz
Etalon Photodiode (dB)
Reference Photodiode (dB)
Diode Photocurrent (dB)
2.000
0.000
--2.000
--4.000
--6.000
--8.000
--10.000
38.5
39.0
39.5
40.0
ITU Channel (GHz)
Optical Schematic
Input Fiber
Etalon Out
Splitter
Etalon
PD2
Monitor Out
PD1
40.5
BROADBAND (FABRY-PEROT ) WAVELENGTH LOCKER
3
(Specifications in mm unless otherwise noted.)
Dimensions Diagram
21.0 mm
8.5 mm
40.0 mm
15.0 mm
18.0 mm
34.0 mm
18.0 mm
Minimum
Pin 6
Pin 1
Ø = 0.45 mm
5.0 mm
2.54 mm
5.0 mm
10.0 mm
2.54 mm x 5
Pinout
Pin
Description
1
2
3
4
5
6
Monitor PD1 anode (+)
Etalon PD2 anode (+)
PD1, PD2 cathode (-)
Temperature sensor supply voltage
Temperature sensor monitor
Temperature sensor ground
8.5 mm
BROADBAND (FABRY-PEROT ) WAVELENGTH LOCKER
4
Specifications
Parameter
50 GHz Free Spectral Range
Wavelength range
Center wavelength
Center channel accuracy over temperature, polarization, and EOL1
Polarization dependent channel accuracy
(included in total center channel accuracy)
Acquisition range (capture range) from nominal ITU center frequency
Locking slope at ITU point
Optical operation power range (Pin) ~ input to module
Optical return loss3
Optical input power for damage
Photodetector calibration offset
Photocurrent
Responsivity of reference (PD1)
Responsivity of etalon (PD2)
Photodetector dark current
Maximum
Maximum
1520 to 1620 nm
ITU grid (standard) or as specified
±2.5 GHz2
0.8 GHz
Typical
Typical
Typical
Minimum
Minimum
Maximum
-30 to 12 GHz
80 dB/nm
-25 to 7 dBm
50 dB
10 mW (CW)
±2.5 dB
Temperature sensor supply voltage at 130 µA
Temperature sensor monitor
Package dimensions (W x H x D)
Electrical pin spacing (center to center)
Fiber type
Operating temperature
Storage temperature
Humidity (noncondensing)
Typical
Maximum
Typical
0.16 to 0.32 A/W
0.16 to 0.40 A/W
0.3 nA at 5 VR, 25°C
0.5 nA at 5 VR, 25°C
5 to 30 V
10 mV/°C
40 x 8.5 x 21 mm
2.54 mm
SMF-28
0 to 70°C
-40 to 85°C
0 to 85% RH
Note: Data for temperature sensor reported at three temperatures at one wavelength (ITU 40). All three temperatures (0, 23 and 70°C) are ±3°C.
1. Calibrated at channel of use.
2. Approaching ±1.25 GHz with temperature sensor.
3. Connected with a five percent tap coupler.
BROADBAND (FABRY-PEROT ) WAVELENGTH LOCKER
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at
[email protected].
Sample: WVL-2B1050410
WVL-2B1050
Code
1
4
Fiber Type
250 µm fiber (SMF-28)2
900 µm tight buffer (SMF-28)
Code
1
Fiber Length
1 meter 3
Code
0
2
3
4
5
Connector 1
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
1. Insertion loss and return loss change depend on connector type.
2. Not available with connector.
3. Tolerance +10 cm, -0 cm
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 10114013 004 0908 WVL.DS.CC.AE
September 2008
SMF-28 is a registered trademark of Corning Incorporated. ST is a registered trademark of Lucent Technologies. Telcordia is a registered trademark of Telcordia Technologies Incorporated.