G60B SERIES The G60B is a T-1 size right-angle indicator suitable as logic status, position, or fault indication. The G60B allows denser packaging where space is a premium. The G60B has the lamp located at 3.2mm, .125") above the PCB. The G60B series can be supplied with pinout reversed from that shown by adding "-RL" to the order code. Specify part desired as follows: G60B/Order Code For example: "G60B/G" designates an assembly with a standard diffused green LED. "G60B/G-RL" designates the same assembly with pins reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Tinted Diffused, Resistor Req’d Tinted Transparent, High Brightness Tinted Diffused, 5V Operation Water Clear Typical Characteristics Color Order Code Peak Wvl (nm) Vf (V) @ If = 20 mA Iv (mcd) @ If = 20 mA 2θ1/2 (Deg) Recom. Op. IF (mA) Hi Eff Red I 635 2.0 10 60 10 - 20 Green G 565 2.1 10 60 10 - 20 Yellow Y 585 2.0 10 60 10 - 20 Orange O 621 2.0 100 60 10 - 20 Blue UBD 428 3.8 120 30 10 - 20 Hi Eff Red IT 639 2.0 11 20 10 - 20 Green GT 570 2.1 35 20 10 - 20 Yellow YT 565 2.1 4.5 20 10 - 20 Hi Eff Red I5 635 — 12.5 50 5V Green G5 565 — 4.5 40 5V Yellow Y5 585 — 4.5 40 5V Blue UBC 428 3.8 200 30 10 - 20 Blue BHC 468 3.8 550 25 10 - 20 Whte WC — 3.8 800 30 10 - 20 * Specifications subject to change without notice. Dimensions are in mm ±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph: 714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0810