Incremental encoders EX approval ATEX EEx d IIC T4 Resolution 5...5000 pulses X 700 - incremental Features –– Encoder incremental / ATEX –– Optical sensing –– Resolution max. 5000 ppr –– Clamping flange / shaft ø10 mm –– Explosion-proof in line with EEx d IIC T4 –– Area of application: EX I/II 2 GD / ATEX 133213X –– Material stainless steel Technical data - mechanical design Voltage supply Housing ø70 mm Reverse polarity protection Yes 4.75...30 VDC Shaft ø10 mm (clamping flange) Consumption w/o load ≤50 mA Flange Clamping flange Resolution (steps/turn) 5...5000 Protection DIN EN 60529 IP 67 Reference signal Zero pulse, width 90° Operating speed ≤6000 rpm Sensing method Optical Starting torque ≤0.04 Nm Output frequency ≤300 kHz Admitted shaft load Output signals A 90° B, N + inverted ≤60 N axial ≤50 N radial Output circuit Push-pull short-circuit proof Materials Interference immunity DIN EN 61000-6-2 Housing: stainless steel Flange: stainless steel Emitted interference DIN EN 61000-6-4 Operating temperature -25...+70 °C Relative humidity 95 % non-condensing Resistance DIN EN 60068-2-6 Vibration 10 g, 12-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms Weight approx. 1300 g E-connection Cable 2 m (other length upon request) Output signals Clockwise rotating direction when looking at flange. Track A Track A Track B Track B Zero pulse 90° Zero pulse Optional: other reference impulse. 1 www.baumerivo.com 29/10/2008 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. X 700 with EX-proof housing Incremental encoders EX approval ATEX EEx d IIC T4 Resolution 5...5000 pulses X 700 - incremental Part number X 700.I Terminal assignment 1 See part number (pulses) E-connection 32 Cable 2 m, axial 34 Cable 5 m, axial Voltage supply / signals 1 4.75...30 VDC / push-pull 2 5 VDC / RS422 Part number (pulses) (5) (10) (25) (50) 40 41 57 06 (60) (100) (128) (200) 09 13 14 15 (250) (360) (400) (500) Core colour Assignment #1 white GND #2 brown UB #3 green Track A #4 yellow Track B #5 grey Track N #6 pink Track A inv. #7 blue Track B inv. #8 red Track N inv. Trigger level Flange / Shaft 1 Clamping flange / ø10 mm IP 67 49 36 50 39 Core no. 22 23 26 28 (1000) (1024) (1500) (2000) Outputs Push-pull short-circuit proof Output level High >UB -1.4 V (I = -20 mA) Output level Low <0.5 V (I = 20 mA) Load High <20 mA Load Low <20 mA Dimensions ~40 68 10 (21.5) ø50 20 M5x10 (6x60°) ø64 ø70 ø40 g6 ø10 g6 9.5 ø30 15 3 3 2 www.baumerivo.com 29/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses