ALLEN-BRADLEY 440F

Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Specifications
Standards
EN1760-2, EN 954-1, ISO13849-1,
IEC/EN60204-1, ANSI B11.19,
AS 4024.5
Approvals
CE marked for all applicable directives,
cULus and TÜV, c-tick not required
Power supply
Operates on 4V DC supplied from
control unit
Operating temperature
EPDM material -5°C to +55°C (23°F to 131°F)
NBR/CR material 0°C to + 55°C (32°F to 131°F)
Description
The ability of the Safedge profile to out perform competition lies in
its innovative design. It uses a combination of non conductive
rubber and flexible wire cored conductive rubber bonded together
so it keeps bouncing back into shape even after repeated
compressions.
The Safedge profiles come in 3 different cushions factors: 5mm
(0.2in), 19mm (0.75in) and 41mm (1.6in). Cushion factor is the
distance the profile can be depressed after a signal has been
generated. The profiles are also offered with a sealing lip which is
designed to reduce drafts between the profile and opposing surface.
Humidity
90% RH
Enclosure Protection
IP67 (NEMA 6P)
Conductor Size
(18AWG)
Materials
EPDM Ethylene Propylene Diene Modified
Rubber
NBR/CR Acrylonitrile (34% nitrile) Butadiene
Rubber/Chloropriene Rubber
Mounting
Any position using Type C112 “C” rail
Weight
See Ordering Details
Chemical Resistance of Safedge Profile
Substance
Resistance—“S”
Profile EPDM
Resistance—“N”
Profile NBR/CR
Acetic Acid (10%)
Good
Good
The profiles come in two different materials. Use the EPDM
material in the presence of conductive fluids. The NBR/CR material
performs better in the presence of oils. Review the chemical
resistance chart to help make the best choice of material. If in doubt,
a small sample of the profile should be tested for chemical resistance
before a final selection is made.
Acetone
Good
Fair
Ammonium Hydroxide
(35%)
Good
Good
Benzene
Poor
Poor
Diesel Oil
Poor
Good
Ethyl Alcohol (Ethanol)
Good
Good
The Safedge profile has no rigid internal parts which can “break
through” or cause fatigue failures after prolonged use. The multistranded copper wire core throughout the length of the strip insures
that there are no problems of resistance build up on long lengths.
Hydrochloric Acid
(10%)
Good
Good
Lubricating Oil
Poor
Good
Nitric Acid (10%)
Good
Fair
Petrol
Poor
Fair
Features
•
•
•
•
•
•
•
Various profiles
Conductive rubber technology
Up to 50m lengths
Aluminium, plastic or zinc coated steel, mounting rails
Rubber boot optional
Active corners
Sealing lip available
2-94
Silicone Fluids
Good
Good
Sodium Chloride (25%)
Good
Good
Trichlorethylene
Good
Poor
Vegetable Oils (general)
Good
Good
Water (distilled)
Good
Good
Water (sea)
Good
Good
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Profiles
Code
(Page 2-100)
Dimension
Profile
Description
0110S
Black, EPDM,
Weight: 463g/m
(0.33lbs/ft)
Cushion Factor
28.5 (1.12)
A
24.5
(0.96)
5mm
28.5 (1.12)
C
0110N
24.5
(0.96)
Black, NBR/CR,
Weight: 460g/m
(0.31lbs/ft)
5mm
28.5 (1.12)
B
0110R
24.5
(0.96)
Red, EPDM,
Weight: 502g/m
(0.34lbs/ft)
5mm
E
43 (1.69)
28.5 (1.12)
1610S
14
(0.55)
Black, EPDM,
Weight: 843g/m
(0.57lbs/ft)
19mm
F
43 (1.69)
28.5 (1.12)
1610N
14
(0.55)
Black, NBR/CR,
Weight: 837g/m
(0.56lbs/ft)
19mm
H
68 (2.68)
36 (1.42)
30 (1.18)
0310S
Black, EPDM,
Weight: 1209g/m
(0.81lbs/ft)
41mm
28.5 (1.12)
D, J
24.5
(0.96)
0510S
28-30
(1.10-1.18)
G, K
5mm
Catalogue Number
5 (16.4)
440F-E0110S05
10 (32.8)
440F-E0110S10
20 (65.6)
440F-E0110S20
5 (16.4)
440F-E0110N05
10 (32.8)
440F-E0110N10
20 (65.6)
440F-E0110N20
5 (16.4)
440F-E0110R05
10 (32.8)
440F-E0110R10
20 (65.6)
440F-E0110R20
5 (16.4)
440F-E1610S05
10 (32.8)
440F-E1610S10
20 (65.6)
440F-E1610S20
5 (16.4)
440F-E1610N05
10 (32.8)
440F-E1610N10
20 (65.6)
440F-E1610N20
5 (16.4)
440F-E0310S05
10 (32.8)
440F-E0310S10
20 (65.6)
440F-E0310S20
5 (16.4)
440F-E0510S05
10 (32.8)
440F-E0510S10
20 (65.6)
440F-E0510S20
5 (16.4)
440F-E0804S05
10 (32.8)
440F-E0804S10
20 (65.6)
440F-E0804S20
25 (0.98)
43 (1.69)
14
(0.55)
Black, EPDM, with
Sealing Lip
Weight: 545g/m
(0.37lbs/ft)
Length—
m (ft)
0804S
17
(0.67)
Black, EPDM, with
Sealing Lip
Weight: 1013g/m
(0.68lbs/ft)
19mm
2-95
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Profiles
Code
(Page 2-100)
Dimension
Profile
Description
0210S
Black, EPDM, with
Sealing Lip
Weight: 1291g/m
(0.87lbs/ft)
Cushion Factor
Length—
m (ft)
Catalogue Number
5 (16.4)
440F-E0210S05
10 (32.8)
440F-E0210S10
20 (65.6)
440F-E0210S20
5 (16.4)
440F-E0118S05
10 (32.8)
440F-E0118S10
20 (65.6)
440F-E0118S20
5 (16.4)
440F-E1111S05
10 (32.8)
440F-E1111S10
20 (65.6)
440F-E1111S20
I, L
68 (2.68)
36 (1.42)
30 (1.18)
41mm (1.61in)
M
16 (0.63)
29
(1.14)
0118S
Black, EPDM
Weight: 242g/m
(0.163lbs/ft)
3.75mm (0.15in)
18 (0.71)
N, O
2-96
67 (2.64)
50 (1.97)
1111S
Black, EPDM
Weight: 680g/m
(0.457lbs/ft)
NA
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—“C” Rails
Code
Dimension—mm (inches)
10
(0.39)
A
25 (0.98)
10
(0.39)
B
25 (0.98)
10
(0.39)
C
25 (0.98)
10
(0.39)
D
25 (0.98)
10
(0.39)
E
25 (0.98)
25 (0.98)
10
(0.39)
F
20 (0.79)
10
(0.39)
G
25 (0.98) 25 (0.98)
18
(0.71)
H
25 (0.98)
8.5
(0.33)
I
18 (0.71)
45 (1.77)
J
13
(0.51)
45 (1.77)
NA
10
(0.4)
Description
Catalogue Number
Aluminium type; Type C112/A
Suitable for all profiles.
3m (9.8ft) length
Weight: 258g/m (0.17lbs/ft)
440F-R1212
Zinc-Coated Steel; Type C112/S
Suitable for all profiles
2m (6.5ft) length
Weight: 663g/m (0.45lbs/ft)
440F-R1112
PVC Black; Type C112/PB
Suitable for all profiles
3m (9.8ft) length
Weight: 111g/m (0.07lbs/ft)
440F-R1212PB
PVC Red; Type C112/PR
Suitable for all profiles
3m (9.8ft) length
Weight: 111g/m (0.07lbs/ft)
440F-R1212PR
PVC Yellow; Type C112/PY
Suitable for all profiles
3m (9.8ft) length
Weight: 111g/m (0.07lbs/ft)
440F-R1212PY
Aluminium Vertical Lip; Type C112/
A2
Suitable for all profiles
2m (6.5ft) length
Weight: 368g/m (0.25lbs/ft)
440F-R1214
Aluminium Horizontal Lip;
Type C112/A3
Suitable for all profiles
2m (6.5ft) length
Weight: 388g/m (0.26lbs/ft)
440F-R1215
Aluminium Deep Channel;
Type C112/A4
Suitable for all profiles
2m (6.5ft) length
Weight: 345g/m (0.23lbs/ft)
440F-R1216
Aluminium;
Suitable for Mini Profile Only
2m (6.5ft) length
Weight: 150g/m (___lbs/ft)
440F-R1219
Aluminium
Suitable for Rubber Boot Only
?m (ft) length
Weight: 667g/m (0.448lbs/ft)
440F-R2151
Aluminium
End Plate for C-Rail Option J
2 Plates
4 Screws, flat head, Philips, 10mm,
#6, Weight: 7g (0.01lbs)
440F-R2152
2-97
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Component Parts
Dimension
Name
Description
Catalogue Number
1m
440F-A1301
2m
440F-A1302
5m
440F-A1305
12m
440F-A1306
15m
440F-A1307
6kΩ (yellow) resistor for series
termination
440F-A1308
15kΩ (blue) for parallel termination
440F-A1309
Closing Cap material: EPDM
440F-A1302S
Closing Cap material: NRB
440F-A1302N
To close profiles
440F-E0310S and 440F-E1610S.
440F-A1303S
To close profiles
440F-E1610N.
440F-A1303N
Axial Connector
With this connector you can directly
connect two profiles. Suitable for
440F-E0110S and 440F-E0110R profiles.
440F-A0061S
Straight Pin
Connector
Kit contains one pair of pins
suitable for one joint.
440F-A0004
Connector and Cable
Terminator
Closing Cap
Closing Cap
90° Corner
Connector
440F-A0071S
440F-A007IS
When using profile 440F-E0110N select
440F-A007IN
When using profile 440F-E0310S select
440F-A0073S
When using profile 440F-E1610S select
440F-A0074S
When using profile 440F-E1610N select
440F-A0074N
When using profile 440F-E0110N select
440F-A0072N
When using profile 440F-E0110S or
440F-E0110R select
440F-A0072S
When using profile 440F-E1610N select
440F-A0075N
When using profile 440F-E1610S select
440F-A0075S
When using profile 440F-E0310S select
440F-A0076S
45° Corner
Connector
When using profile 440F-E0110N
440F-A0071N45
60° Corner
Connector
When using profile 440F-E0110N
440F-A0071N60
90° Corner
Connector (vertical)
2-98
When using profile 440F-E0110S select
When using profile 440F-E0110R select
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Component Parts
Dimension
Name
Description
Catalogue Number
Use only on Mini Profile—1m
440F-A1181
Use only on Mini Profile—3m
440F-A1183
Use only on Mini Profile—5m
440F-A1185
Terminator
Use only on Mini Profile—
8kΩ (yellow) resistor for series termination
440F-A1186
Closing Cap
Use only on Mini Profile—
Closing Cap material: EPDM
440F-A1318
Cyanocrylate Adhesive
Contents: 3g. Sufficient for approximately
10 terminations.
440F-A0020
Shears
Use to cut profiles.
440F-A3084
Connection Box
Polycarbonate housing 53mm X 53mm X 35mm
complete with two pole terminal and
trumpet type screw on connector with strain
and relief clamp. For use with coiled cable
440F-A0116
2.5m (8.2ft) (extended) of flexible coiled cable.
440F-A2450
3.5m (11.5ft) (extended) of flexible coiled cable.
440F-A2700
Connector and Cable
Coiled Connection
Cable
Control Unit
Connection Box
Coiled
Cable
Closing
Cap
“C” Rail
Connection Box
Connector
with Resistor
Cable
Connector
Example application of profile using coiled cable. The
coiled cable can not be directly connected to the profile
due to the weight of the cable. The proper use of the coiled
cable is to connect the coiled cable to the profile through
the connection box. The coiled cable should be secured to
both the moving and stationary objects so as to prevent
straining of the terminal connections.
Closing
Cap
2-99
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Product Selection (standard
profile)
440F-E ➊
C
a
A
b
M
c
V
d
01270
e
a
Profile
Code
Description
A
0110S
B
0110R
C
0110N
D
0510S with Sealing Lip on Right Side
E
1610S
F
1610N
G
0804S with Sealing Lip on Right Side
H
0310S
I
0210S with Sealing Lip on Right Side
J
0510S with Sealing Lip on Left Side
K
0804S with Sealing Lip on Left Side
L
0210S with Sealing Lip on Left Side
N
Rubber Boot over 0110S
O
Rubber Boot over 1610S
K
SET straight entrance with 1m cable
L
SET straight entrance with 2m cable
M
SET straight entrance with 3m cable
N
SET straight entrance with 5m cable
O
SET straight entrance with 10m cable
P
UNDER entrance with 1m cable
Q
UNDER entrance with 2m cable
R
UNDER entrance with 3m cable
S
UNDER entrance with 5m cable
T
UNDER entrance with 10m cable
e
Termination
Code
Description
A
LHT left exit with 1m cable
B
LHT left exit with 2m cable
C
LHT left exit with 3m cable
D
LHT left exit with 5m cable
LHT left exit with 10m cable
RHT right exit with 1m cable
“C” Rail
G
RHT right exit with 2m cable
H
RHT right exit with 3m cable
Description
B
1112 zinc coated steel for “Profile” codes A-L
C
1212PB PVC black for “Profile” codes A-L
D
1212PR PVC red for “Profile” codes A-L
E
1212PY PVC yellow for “Profile” codes A-L
1214 aluminium with vertical lip for “Profile” codes A-L
G
1215 aluminium with horizontal lip for “Profile” codes A-L
H
1216 aluminium deep rail for “Profile” codes A-L
2151 aluminium for “Profile” codes N and O
No C-Rail (not needed)
I
RHT right exit with 5m cable
J
RHT right exit with 10m cable
K
SET straight exit with 1m cable
L
SET straight exit with 2m cable
M
SET straight exit with 3m cable
N
SET straight exit with 5m cable
O
SET straight exit with 10m cable
P
UNDER exit with 1m cable
Q
UNDER exit with 2m cable
R
UNDER exit with 3m cable
c
S
UNDER exit with 5m cable
T
UNDER exit with 10m cable
Cable Entrance
U
Parallel Termination—15kΩ
V
Series Termination—6kΩ
Code
Description
A
LHT left entrance with 1m cable
B
LHT left entrance with 2m cable
C
LHT left entrance with 3m cable
D
LHT left entrance with 5m cable
E
LHT left entrance with 10m cable
F
RHT right entrance with 1m cable
G
RHT right entrance with 2m cable
H
RHT right entrance with 3m cable
I
RHT right entrance with 5m cable
J
RHT right entrance with 10m cable
K
SET straight entrance with 1m cable
L
SET straight entrance with 2m cable
2-100
RHT right entrance with 10m cable
F
1212 aluminium for “Profile” codes A-L
N
Description
J
E
A
J
Cable Entrance
Code
b
Code
F
d (continued)
f
Length of Edge
Code
Description
5 digit number
Enter length of edge in mm
for example: 50m=50000; 500mm=00500
300mm minimum
➊ Order controller separately. See page 2-104 for
selection details.
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Product Selection
(mini-profile)
c
Cable Entrance
Code
Description
K
SET straight entrance 1m cable
M
SET straight entrance 3m cable
N
SET straight entrance 5m cable
P
UNDER entrance 1m cable
R
UNDER entrance 3m cable
S
UNDER entrance 5m cable
d
Termination
440F-E ➊
M
a
I
b
M
c
V
d
01270
e
a
Profile
Code
Description
K
SET straight entrance 1m cable
M
SET straight entrance 3m cable
N
SET straight entrance 5m cable
P
UNDER entrance 1m cable
R
UNDER entrance 3m cable
S
UNDER entrance 5m cable
V
Series Termination—8kΩ
Code
Description
e
M
0118S 3.75mm (0.15in) Cushion Factor Black, Mini Profile
Length
b
“C” Rail
Code
Description
I
1219 aluminium for “Profile” code M
N
No C-Rail (not needed)
Code
Description
5 digit number
Enter length of edge in mm
for example: 50m=50000; 500mm=00500
300mm minimum
➊ Order controller separately. See page 2-104 for
selection details.
2-101
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Examples
440F-EDFHV00490
V
F
Series Termination Type 1214 Aluminum Rail
6KΩ
with Vertical Lip
440F-ECAKV01250
A
Type C112/A
Aluminum C Rail
H
RHT—Right Hand
Entrance with
3m Cable
V
Series Termination
6KΩ
C
D
Type 0110N
Oil Resistant Profile
1250 mm long
Type 0510S Profile
with Sealing Lip
490mm long
K
SET Cable Entrance
with 1m Cable
This is a single oil resistant profile which is 1250mm long. The edge
is terminated with a Series Termination. A 1m cable enters straight
into the closing cap from a DIN-rail mounted controller. The profile is
mounted on a standard aluminium C rail.
Note orientation of sealing
lip to cable entrance
This is single profile has a sealing lip and is 490mm long. The profile
is terminated with a Series Termination. A 3m cable enters into the
right hand side of the closing cap from a plastic surface mounted
controller. The profile is mounted on an aluminium rail with a vertical
lip for ease of mounting. The orientation of the sealing lip to the
vertical lip can be reversed by the user by sliding the profile out of
the C Rail, rotating the C Rail 180° and then re-inserting the profile
back into the C Rail.
440F-EBGCU03560
G
Type 1215 Aluminum Rail
with Horizontal Lip
440F-ECFGD01250
F
Type 1214 Aluminum Rail
with Vertical Lip
G
RHT—Right Hand
Entrance with 2m Cable
D
LHT Cable Exit
5m
U
Parallel Termination
15KΩ
B
Type 0110R Profile
3560mm long
C
LHT—Entrance
with 3m Cable
C
Type 0110N Oil Resistant Profile
1250mm long
This is a single oil resistant profile which is 1250mm long. The edge
is terminated with a 1m cable. A 1m cable enters straight into the
closing cap. The profile is mounted on a standard aluminium C rail. A
control unit is not included. This edge is intended to be used in series
with another length of edge which has a terminating resistor.
2-102
This is a red-coloured single profile which is 3560mm long. This
profile is part of a parallel profile system, for ease of mounting, as it
is terminated with a Parallel Termination. A 3m cable enters into the
left side of the closing cap from a plastic surface mount controller.
The profile is mounted on an aluminium C Rail with a horizontal lip
for ease of mounting. The horizontal lip can be reversed by the user
by sliding the profile out of the C Rail, rotating the C Rail and then
re-inserting the profile back into the C Rail. A separate catalogue
number must be entered for the other profile.